a10_system_asic_mmu_fail_safe
Synopsis
ASIC Fail Safe Global Commands
Parameters
Parameters |
Choices/Defaults |
Comment |
|
---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
recovery_threshold int |
ASIC Fail-safe recovery threshold in Errors (Units of 1 Errors (default 2)) |
||
monitor_interval int |
ASIC Fail-safe monitoring intervals in Seconds (Units of 1 Seconds (default 60)) |
||
monitor_disable bool |
Enable Fail-safe software error monitoring and act on it |
||
reboot_disable bool |
Disable system reboot if system encounters mmu error |
||
inject_error bool |
Inject MMU SER/Parity errors |
||
test_pattern_type str |
‘all-zeros’= Inject all bits 0s in a byte; ‘all-ones’= Inject all bits 1s in a byte; ‘lcb’= Logical checker board; ‘inverse-lcb’= Inverse Logical checker board; |
||
uuid str |
uuid of the object |
||
oper dict |
Field oper |
||
enable_val str |
Field enable_val |
||
threshold_val int |
Field threshold_val |
||
period_val int |
Field period_val |
||
reboot_val str |
Field reboot_val |
||
parity_unrecov int |
Field parity_unrecov |
||
parity_error int |
Field parity_error |
||
parity_ecc int |
Field parity_ecc |
||
parity_ser int |
Field parity_ser |
||
parity_start_err int |
Field parity_start_err |
||
mmu_ser int |
Field mmu_ser |
||
parity_bst int |
Field parity_bst |
||
mmu_total_error int |
Field mmu_total_error |
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.