a10_slb_smpp

Synopsis

Configure SMPP

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
uuid str			uuid of the object
sampling_enable list			Field sampling_enable
	counters1 str		‘all’= all; ‘msg_proxy_current’= Curr SMPP Proxy; ‘msg_proxy_total’= Total SMPP Proxy; ‘msg_proxy_mem_allocd’= msg_proxy_mem_allocd; ‘msg_proxy_mem_cached’= msg_proxy_mem_cached; ‘msg_proxy_mem_freed’= msg_proxy_mem_freed; ‘msg_proxy_client_recv’= Client message rcvd; ‘msg_proxy_client_send_success’= Sent to server; ‘msg_proxy_client_incomplete’= Incomplete; ‘msg_proxy_client_drop’= AX responds directly; ‘msg_proxy_client_connection’= Connecting server; ‘msg_proxy_client_fail’= Number of SMPP messages received from client but failed to forward to server; ‘msg_proxy_client_fail_parse’= msg_proxy_client_fail_parse; ‘msg_proxy_client_fail_process’= msg_proxy_client_fail_process; ‘msg_proxy_client_fail_snat’= msg_proxy_client_fail_snat; ‘msg_proxy_client_exceed_tmp_buff’= msg_proxy_client_exceed_tmp_buff; ‘msg_proxy_client_fail_send_pkt’= msg_proxy_client_fail_send_pkt; ‘msg_proxy_client_fail_start_server_Conn’= msg_proxy_client_fail_start_server_Conn; ‘msg_proxy_server_recv’= Server message rcvd; ‘msg_proxy_server_send_success’= Sent to client; ‘msg_proxy_server_incomplete’= Incomplete; ‘msg_proxy_server_drop’= Number of the packet AX drop; ‘msg_proxy_server_fail’= Number of SMPP messages received from server but failed to forward to client; ‘msg_proxy_server_fail_parse’= msg_proxy_server_fail_parse; ‘msg_proxy_server_fail_process’= msg_proxy_server_fail_process; ‘msg_proxy_server_fail_selec_connt’= msg_proxy_server_fail_selec_connt; ‘msg_proxy_server_fail_snat’= msg_proxy_server_fail_snat; ‘msg_proxy_server_exceed_tmp_buff’= msg_proxy_server_exceed_tmp_buff; ‘msg_proxy_server_fail_send_pkt’= msg_proxy_server_fail_send_pkt; ‘msg_proxy_create_server_conn’= Server conn created; ‘msg_proxy_start_server_conn’= Number of server connection created successfully; ‘msg_proxy_fail_start_server_conn’= Number of server connection created failed; ‘msg_proxy_server_conn_fail_snat’= msg_proxy_server_conn_fail_snat; ‘msg_proxy_fail_construct_server_conn’= msg_proxy_fail_construct_server_conn; ‘msg_proxy_fail_reserve_pconn’= msg_proxy_fail_reserve_pconn; ‘msg_proxy_start_server_conn_failed’= msg_proxy_start_server_conn_failed; ‘msg_proxy_server_conn_already_exists’= msg_proxy_server_conn_already_exists; ‘msg_proxy_fail_insert_server_conn’= msg_proxy_fail_insert_server_conn; ‘msg_proxy_parse_msg_fail’= msg_proxy_parse_msg_fail; ‘msg_proxy_process_msg_fail’= msg_proxy_process_msg_fail; ‘msg_proxy_no_vport’= msg_proxy_no_vport; ‘msg_proxy_fail_select_server’= msg_proxy_fail_select_server; ‘msg_proxy_fail_alloc_mem’= msg_proxy_fail_alloc_mem; ‘msg_proxy_unexpected_err’= msg_proxy_unexpected_err; ‘msg_proxy_l7_cpu_failed’= msg_proxy_l7_cpu_failed; ‘msg_proxy_l4_to_l7’= msg_proxy_l4_to_l7; ‘msg_proxy_l4_from_l7’= msg_proxy_l4_from_l7; ‘msg_proxy_to_l4_send_pkt’= msg_proxy_to_l4_send_pkt; ‘msg_proxy_l4_from_l4_send’= msg_proxy_l4_from_l4_send; ‘msg_proxy_l7_to_L4’= msg_proxy_l7_to_L4; ‘msg_proxy_mag_back’= msg_proxy_mag_back; ‘msg_proxy_fail_dcmsg’= msg_proxy_fail_dcmsg; ‘msg_proxy_deprecated_conn’= msg_proxy_deprecated_conn; ‘msg_proxy_hold_msg’= msg_proxy_hold_msg; ‘msg_proxy_split_pkt’= msg_proxy_split_pkt; ‘msg_proxy_pipline_msg’= msg_proxy_pipline_msg; ‘msg_proxy_client_reset’= msg_proxy_client_reset; ‘msg_proxy_server_reset’= msg_proxy_server_reset; ‘payload_allocd’= payload_allocd; ‘payload_freed’= payload_freed; ‘pkt_too_small’= pkt_too_small; ‘invalid_seq’= invalid_seq; ‘AX_response_directly’= Number of packet which AX responds directly; ‘select_client_conn’= Client conn selection; ‘select_client_by_req’= Select by request; ‘select_client_from_list’= Select by roundbin; ‘select_client_by_conn’= Select by conn; ‘select_client_fail’= Select failed; ‘select_server_conn’= Server conn selection; ‘select_server_by_req’= Select by request; ‘select_server_from_list’= Select by roundbin; ‘select_server_by_conn’= Select server conn by client conn; ‘select_server_fail’= Fail to select server conn; ‘bind_conn’= bind_conn; ‘unbind_conn’= unbind_conn; ‘enquire_link_recv’= enquire_link_recv; ‘enquire_link_resp_recv’= enquire_link_resp_recv; ‘enquire_link_send’= enquire_link_send; ‘enquire_link_resp_send’= enquire_link_resp_send; ‘client_conn_put_in_list’= client_conn_put_in_list; ‘client_conn_get_from_list’= client_conn_get_from_list; ‘server_conn_put_in_list’= server_conn_put_in_list; ‘server_conn_get_from_list’= server_conn_get_from_list; ‘server_conn_fail_bind’= server_conn_fail_bind; ‘single_msg’= single_msg; ‘fail_bind_msg’= fail_bind_msg;
oper dict			Field oper
	smpp_cpu_fields list		Field smpp_cpu_fields
	cpu_count int		Field cpu_count
	filter_type str		Field filter_type
stats dict			Field stats
	msg_proxy_current str		Curr SMPP Proxy
	msg_proxy_total str		Total SMPP Proxy
	msg_proxy_client_recv str		Client message rcvd
	msg_proxy_client_send_success str		Sent to server
	msg_proxy_client_incomplete str		Incomplete
	msg_proxy_client_drop str		AX responds directly
	msg_proxy_client_connection str		Connecting server
	msg_proxy_client_fail str		Number of SMPP messages received from client but failed to forward to server
	msg_proxy_server_recv str		Server message rcvd
	msg_proxy_server_send_success str		Sent to client
	msg_proxy_server_incomplete str		Incomplete
	msg_proxy_server_drop str		Number of the packet AX drop
	msg_proxy_server_fail str		Number of SMPP messages received from server but failed to forward to client
	msg_proxy_create_server_conn str		Server conn created
	msg_proxy_start_server_conn str		Number of server connection created successfully
	msg_proxy_fail_start_server_conn str		Number of server connection created failed
	AX_response_directly str		Number of packet which AX responds directly
	select_client_conn str		Client conn selection
	select_client_by_req str		Select by request
	select_client_from_list str		Select by roundbin
	select_client_by_conn str		Select by conn
	select_client_fail str		Select failed
	select_server_conn str		Server conn selection
	select_server_by_req str		Select by request
	select_server_from_list str		Select by roundbin
	select_server_by_conn str		Select server conn by client conn
	select_server_fail str		Fail to select server conn

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks