a10_interface_trunk_ipv6

Synopsis

Global IPv6 configuration subcommands

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
trunk_ifnum str/required			Key to identify parent object
address_list list			Field address_list
	ipv6_addr str		Set the IPv6 address of an interface
	address_type str		‘anycast’= Configure an IPv6 anycast address; ‘link-local’= Configure an IPv6 link local address;
ipv6_enable bool			Enable IPv6 processing
access_list_cfg dict			Field access_list_cfg
	v6_acl_name str		Apply ACL rules to incoming packets on this interface (Named Access List)
	inbound bool		ACL applied on incoming packets to this interface
nat dict			Field nat
	inside bool		Configure interface as NAT inside
	outside bool		Configure interface as NAT outside
ttl_ignore bool			Ignore TTL decrement for a received packet
router_adver dict			Field router_adver
	action str		‘enable’= Enable Router Advertisements on this interface; ‘disable’= Disable Router Advertisements on this interface;
	default_lifetime int		Set Router Advertisement Default Lifetime (default= 1800) (Default Lifetime (seconds))
	hop_limit int		Set Router Advertisement Hop Limit (default= 255) (Max Router Advertisement Interval (seconds))
	max_interval int		Set Router Advertisement Max Interval (default= 600) (Min Router Advertisement Interval (seconds))
	min_interval int		Set Router Advertisement Min Interval (default= 200) (Max Number of Router Solicitations to process per second)
	rate_limit int		Rate Limit the processing of incoming Router Solicitations (Max Number of Router Solicitations to process per second)
	reachable_time int		Set Router Advertisement Reachable ime (default= 0) (Reachable Time (milliseconds))
	retransmit_timer int		Set Router Advertisement Retransmit Timer (default= 0)
	mtu dict		Field mtu
	prefix_list list		Field prefix_list
	managed_config_action str		‘enable’= Enable the Managed Address Configuration flag; ‘disable’= Disable the Managed Address Configuration flag (default);
	other_config_action str		‘enable’= Enable the Other Stateful Configuration flag; ‘disable’= Disable the Other Stateful Configuration flag (default);
	vrid dict		Field vrid
uuid str			uuid of the object
stateful_firewall dict			Field stateful_firewall
	inside bool		Inside (private) interface for stateful firewall
	class_list str		Class List (Class List Name)
	outside bool		Outside (public) interface for stateful firewall
	access_list bool		Access-list for traffic from the outside
	acl_name str		Access-list Name
	uuid str		uuid of the object
router dict			Field router
	ripng dict		Field ripng
	ospf dict		Field ospf
	isis dict		Field isis
rip dict			Field rip
	split_horizon_cfg dict		Field split_horizon_cfg
	uuid str		uuid of the object
ospf dict			Field ospf
	network_list list		Field network_list
	bfd bool		Bidirectional Forwarding Detection (BFD)
	disable bool		Disable BFD
	cost_cfg list		Field cost_cfg
	dead_interval_cfg list		Field dead_interval_cfg
	hello_interval_cfg list		Field hello_interval_cfg
	mtu_ignore_cfg list		Field mtu_ignore_cfg
	neighbor_cfg list		Field neighbor_cfg
	priority_cfg list		Field priority_cfg
	retransmit_interval_cfg list		Field retransmit_interval_cfg
	transmit_delay_cfg list		Field transmit_delay_cfg
	uuid str		uuid of the object

Examples

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks 2021