a10_interface_ethernet_ipv6

Synopsis

Global IPv6 configuration subcommands

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
ethernet_ifnum str/required			Key to identify parent object
address_list list			Field address_list
	ipv6_addr str		Set the IPv6 address of an interface
	address_type str		‘anycast’= Configure an IPv6 anycast address; ‘link-local’= Configure an IPv6 link local address;
inside bool			Configure interface as inside
outside bool			Configure interface as outside
ipv6_enable bool			Enable IPv6 processing
ttl_ignore bool			Ignore TTL decrement for a received packet before sending out
access_list_cfg dict			Field access_list_cfg
	v6_acl_name str		Apply ACL rules to incoming packets on this interface (Named Access List)
	inbound bool		ACL applied on incoming packets to this interface
router_adver dict			Field router_adver
	action str		‘enable’= Enable Router Advertisements on this interface; ‘disable’= Disable Router Advertisements on this interface;
	hop_limit int		Set Router Advertisement Hop Limit (default= 255)
	max_interval int		Set Router Advertisement Max Interval (default= 600) (Max Router Advertisement Interval (seconds))
	min_interval int		Set Router Advertisement Min Interval (default= 200) (Min Router Advertisement Interval (seconds))
	default_lifetime int		Set Router Advertisement Default Lifetime (default= 1800) (Default Lifetime (seconds))
	rate_limit int		Rate Limit the processing of incoming Router Solicitations (Max Number of Router Solicitations to process per second)
	reachable_time int		Set Router Advertisement Reachable ime (default= 0) (Reachable Time (milliseconds))
	retransmit_timer int		Set Router Advertisement Retransmit Timer (default= 0)
	adver_mtu_disable bool		Disable Router Advertisement MTU Option
	adver_mtu int		Set Router Advertisement MTU Option
	prefix_list list		Field prefix_list
	managed_config_action str		‘enable’= Enable the Managed Address Configuration flag; ‘disable’= Disable the Managed Address Configuration flag (default);
	other_config_action str		‘enable’= Enable the Other Stateful Configuration flag; ‘disable’= Disable the Other Stateful Configuration flag (default);
	adver_vrid int		Specify ha VRRP-A vrid
	use_floating_ip bool		Use a floating IP as the source address for Router advertisements
	floating_ip str		Use a floating IP as the source address for Router advertisements
	adver_vrid_default bool		Default VRRP-A vrid
	use_floating_ip_default_vrid bool		Use a floating IP as the source address for Router advertisements
	floating_ip_default_vrid str		Use a floating IP as the source address for Router advertisements
uuid str			uuid of the object
stateful_firewall dict			Field stateful_firewall
	inside bool		Inside (private) interface for stateful firewall
	class_list str		Class List (Class List Name)
	outside bool		Outside (public) interface for stateful firewall
	access_list bool		Access-list for traffic from the outside
	acl_name str		Access-list Name
	uuid str		uuid of the object
router dict			Field router
	ripng dict		Field ripng
	ospf dict		Field ospf
	isis dict		Field isis
rip dict			Field rip
	split_horizon_cfg dict		Field split_horizon_cfg
	uuid str		uuid of the object
ospf dict			Field ospf
	network_list list		Field network_list
	bfd bool		Bidirectional Forwarding Detection (BFD)
	disable bool		Disable BFD
	cost_cfg list		Field cost_cfg
	dead_interval_cfg list		Field dead_interval_cfg
	hello_interval_cfg list		Field hello_interval_cfg
	mtu_ignore_cfg list		Field mtu_ignore_cfg
	neighbor_cfg list		Field neighbor_cfg
	priority_cfg list		Field priority_cfg
	retransmit_interval_cfg list		Field retransmit_interval_cfg
	transmit_delay_cfg list		Field transmit_delay_cfg
	uuid str		uuid of the object

Examples

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks 2021