a10_interface_ethernet_isis

Synopsis

ISIS

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
ethernet_ifnum str/required			Key to identify parent object
authentication dict			Field authentication
	send_only_list list		Field send_only_list
	mode_list list		Field mode_list
	key_chain_list list		Field key_chain_list
bfd_cfg dict			Field bfd_cfg
	bfd bool		Bidirectional Forwarding Detection (BFD)
	disable bool		Disable BFD
circuit_type str			‘level-1’= Level-1 only adjacencies are formed; ‘level-1-2’= Level-1-2 adjacencies are formed; ‘level-2-only’= Level-2 only adjacencies are formed;
csnp_interval_list list			Field csnp_interval_list
	csnp_interval int		Set CSNP interval in seconds (CSNP interval value)
	level str		‘level-1’= Speficy interval for level-1 CSNPs; ‘level-2’= Specify interval for level-2 CSNPs;
padding bool			Add padding to IS-IS hello packets
hello_interval_list list			Field hello_interval_list
	hello_interval int		Set Hello interval in seconds (Hello interval value)
	level str		‘level-1’= Specify hello-interval for level-1 IIHs; ‘level-2’= Specify hello- interval for level-2 IIHs;
hello_interval_minimal_list list			Field hello_interval_minimal_list
	hello_interval_minimal bool		Set Hello holdtime 1 second, interval depends on multiplier
	level str		‘level-1’= Specify hello-interval for level-1 IIHs; ‘level-2’= Specify hello- interval for level-2 IIHs;
hello_multiplier_list list			Field hello_multiplier_list
	hello_multiplier int		Set multiplier for Hello holding time (Hello multiplier value)
	level str		‘level-1’= Specify hello multiplier for level-1 IIHs; ‘level-2’= Specify hello multiplier for level-2 IIHs;
lsp_interval int			Set LSP transmission interval (LSP transmission interval (milliseconds))
mesh_group dict			Field mesh_group
	value int		Mesh group number
	blocked bool		Block LSPs on this interface
metric_list list			Field metric_list
	metric int		Configure the metric for interface (Default metric)
	level str		‘level-1’= Apply metric to level-1 links; ‘level-2’= Apply metric to level-2 links;
network str			‘broadcast’= Specify IS-IS broadcast multi-access network; ‘point-to-point’= Specify IS-IS point-to-point network;
password_list list			Field password_list
	password str		Configure the authentication password for interface
	level str		‘level-1’= Specify password for level-1 PDUs; ‘level-2’= Specify password for level-2 PDUs;
priority_list list			Field priority_list
	priority int		Set priority for Designated Router election (Priority value)
	level str		‘level-1’= Specify priority for level-1 routing; ‘level-2’= Specify priority for level-2 routing;
retransmit_interval int			Set per-LSP retransmission interval (Interval between retransmissions of the same LSP (seconds))
wide_metric_list list			Field wide_metric_list
	wide_metric int		Configure the wide metric for interface
	level str		‘level-1’= Apply metric to level-1 links; ‘level-2’= Apply metric to level-2 links;
uuid str			uuid of the object

Examples

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks 2021