a10_interface_lif

Synopsis

Logical interface

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
ifnum int/required			Lif interface number
mtu int			Interface mtu (Interface MTU, default 1 (min MTU is 1280 for IPv6))
action str			‘enable’= Enable; ‘disable’= Disable;
access_list dict			Field access_list
	acl_id int		ACL id
	acl_name str		Apply an access list (Named Access List)
uuid str			uuid of the object
user_tag str			Customized tag
sampling_enable list			Field sampling_enable
	counters1 str		‘all’= all; ‘num_pkts’= num_pkts; ‘num_total_bytes’= num_total_bytes; ‘num_unicast_pkts’= num_unicast_pkts; ‘num_broadcast_pkts’= num_broadcast_pkts; ‘num_multicast_pkts’= num_multicast_pkts; ‘num_tx_pkts’= num_tx_pkts; ‘num_total_tx_bytes’= num_total_tx_bytes; ‘num_unicast_tx_pkts’= num_unicast_tx_pkts; ‘num_broadcast_tx_pkts’= num_broadcast_tx_pkts; ‘num_multicast_tx_pkts’= num_multicast_tx_pkts; ‘dropped_dis_rx_pkts’= dropped_dis_rx_pkts; ‘dropped_rx_pkts’= dropped_rx_pkts; ‘dropped_dis_tx_pkts’= dropped_dis_tx_pkts; ‘dropped_tx_pkts’= dropped_tx_pkts;
ip dict			Field ip
	dhcp bool		Use DHCP to configure IP address
	address_list list		Field address_list
	allow_promiscuous_vip bool		Allow traffic to be associated with promiscuous VIP
	cache_spoofing_port bool		This interface connects to spoofing cache
	inside bool		Configure interface as inside
	outside bool		Configure interface as outside
	generate_membership_query bool		Enable Membership Query
	query_interval int		1 - 255 (Default is 125)
	max_resp_time int		Maximum Response Time (Max Response Time (Default is 100))
	uuid str		uuid of the object
	router dict		Field router
	rip dict		Field rip
	ospf dict		Field ospf
bfd dict			Field bfd
	authentication dict		Field authentication
	echo bool		Enable BFD Echo
	demand bool		Demand mode
	interval_cfg dict		Field interval_cfg
	uuid str		uuid of the object
isis dict			Field isis
	authentication dict		Field authentication
	bfd_cfg dict		Field bfd_cfg
	circuit_type str		‘level-1’= Level-1 only adjacencies are formed; ‘level-1-2’= Level-1-2 adjacencies are formed; ‘level-2-only’= Level-2 only adjacencies are formed;
	csnp_interval_list list		Field csnp_interval_list
	padding bool		Add padding to IS-IS hello packets
	hello_interval_list list		Field hello_interval_list
	hello_interval_minimal_list list		Field hello_interval_minimal_list
	hello_multiplier_list list		Field hello_multiplier_list
	lsp_interval int		Set LSP transmission interval (LSP transmission interval (milliseconds))
	mesh_group dict		Field mesh_group
	metric_list list		Field metric_list
	network str		‘broadcast’= Specify IS-IS broadcast multi-access network; ‘point-to-point’= Specify IS-IS point-to-point network;
	password_list list		Field password_list
	priority_list list		Field priority_list
	retransmit_interval int		Set per-LSP retransmission interval (Interval between retransmissions of the same LSP (seconds))
	wide_metric_list list		Field wide_metric_list
	uuid str		uuid of the object
oper dict			Field oper
	state str		Field state
	mac str		Field mac
	igmp_query_sent int		Field igmp_query_sent
	icmp_rate_limit_current int		Field icmp_rate_limit_current
	icmp_rate_over_limit_drop int		Field icmp_rate_over_limit_drop
	icmp6_rate_limit_current int		Field icmp6_rate_limit_current
	icmp6_rate_over_limit_drop int		Field icmp6_rate_over_limit_drop
	ipv4_addr_count int		Field ipv4_addr_count
	ipv4_list list		Field ipv4_list
	ipv6_addr_count int		Field ipv6_addr_count
	ipv6_list list		Field ipv6_list
	ifnum int		Lif interface number
stats dict			Field stats
	num_pkts str		Field num_pkts
	num_total_bytes str		Field num_total_bytes
	num_unicast_pkts str		Field num_unicast_pkts
	num_broadcast_pkts str		Field num_broadcast_pkts
	num_multicast_pkts str		Field num_multicast_pkts
	num_tx_pkts str		Field num_tx_pkts
	num_total_tx_bytes str		Field num_total_tx_bytes
	num_unicast_tx_pkts str		Field num_unicast_tx_pkts
	num_broadcast_tx_pkts str		Field num_broadcast_tx_pkts
	num_multicast_tx_pkts str		Field num_multicast_tx_pkts
	dropped_dis_rx_pkts str		Field dropped_dis_rx_pkts
	dropped_rx_pkts str		Field dropped_rx_pkts
	dropped_dis_tx_pkts str		Field dropped_dis_tx_pkts
	dropped_tx_pkts str		Field dropped_tx_pkts
	ifnum int		Lif interface number

Examples

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks 2021