a10_interface_tunnel

Synopsis

Tunnel interface

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
ifnum int/required			Tunnel interface number
name str			Name for the interface
mtu int			Interface mtu (Interface MTU, default 1 (min MTU is 1280 for IPv6))
action str			‘enable’= Enable; ‘disable’= Disable;
speed int			Speed in Gbit/Sec (Default 10 Gbps)
load_interval int			Configure Load Interval (Seconds (5-300, Multiple of 5), default 300)
security_level int			Configure security level for interface. 100 - Most Secure
uuid str			uuid of the object
user_tag str			Customized tag
sampling_enable list			Field sampling_enable
	counters1 str		‘all’= all; ‘num-rx-pkts’= received packets; ‘num-total-rx-bytes’= received bytes; ‘num-tx-pkts’= sent packets; ‘num-total-tx-bytes’= sent bytes; ‘num-rx- err-pkts’= received error packets; ‘num-tx-err-pkts’= sent error packets; ‘rate_pkt_sent’= Packet sent rate packets/sec; ‘rate_byte_sent’= Byte sent rate bits/sec; ‘rate_pkt_rcvd’= Packet received rate packets/sec; ‘rate_byte_rcvd’= Byte received rate bits/sec;
packet_capture_template str			Name of the packet capture template to be bind with this object
ip dict			Field ip
	address dict		Field address
	generate_membership_query bool		Enable Membership Query
	generate_membership_query_val int		1 - 255 (Default is 125)
	max_resp_time int		Max Response Time (Default is 100)
	uuid str		uuid of the object
	rip dict		Field rip
	ospf dict		Field ospf
ipv6 dict			Field ipv6
	address_cfg list		Field address_cfg
	ipv6_enable bool		Enable IPv6 processing
	uuid str		uuid of the object
	router dict		Field router
	ospf dict		Field ospf
oper dict			Field oper
	state str		Field state
	line_protocol str		Field line_protocol
	link_type str		Field link_type
	mac str		Field mac
	config_speed int		Field config_speed
	ipv4_address str		IPv4 address
	ipv4_netmask str		IPv4 subnet mask
	ipv6_link_local str		Field ipv6_link_local
	ipv6_link_local_prefix str		Field ipv6_link_local_prefix
	ipv6_link_local_type str		Field ipv6_link_local_type
	ipv6_link_local_scope str		Field ipv6_link_local_scope
	ipv4_addr_count int		Field ipv4_addr_count
	ipv4_list list		Field ipv4_list
	ipv6_addr_count int		Field ipv6_addr_count
	ipv6_list list		Field ipv6_list
	ifnum int		Tunnel interface number
stats dict			Field stats
	num_rx_pkts str		received packets
	num_total_rx_bytes str		received bytes
	num_tx_pkts str		sent packets
	num_total_tx_bytes str		sent bytes
	num_rx_err_pkts str		received error packets
	num_tx_err_pkts str		sent error packets
	rate_pkt_sent str		Packet sent rate packets/sec
	rate_byte_sent str		Byte sent rate bits/sec
	rate_pkt_rcvd str		Packet received rate packets/sec
	rate_byte_rcvd str		Byte received rate bits/sec
	ifnum int		Tunnel interface number

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks