a10_interface_management

Synopsis

Management interface

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
access_list dict			Field access_list
	acl_id int		ACL id
	acl_name str		Apply an access list (Named Access List)
duplexity str			‘Full’= Full; ‘Half’= Half; ‘auto’= Auto;
speed str			‘10’= 10 Mbs/sec; ‘100’= 100 Mbs/sec; ‘1000’= 1 Gb/sec; ‘auto’= Auto Negotiate Speed; (Interface Speed)
flow_control bool			Enable 802.3x flow control on full duplex port
broadcast_rate_limit dict			Field broadcast_rate_limit
	bcast_rate_limit_enable bool		Rate limit the l2 broadcast packet on mgmt port
	rate int		packets per second. Default is 500. (packets per second. Please specify an even number. Default is 500)
ip dict			Field ip
	ipv4_address str		IP address
	ipv4_netmask str		IP subnet mask
	dhcp bool		Use DHCP to configure IP address
	control_apps_use_mgmt_port bool		Control applications use management port
	default_gateway str		Set default gateway (Default gateway address)
secondary_ip dict			Field secondary_ip
	secondary_ip bool		Global IP configuration subcommands
	ipv4_address str		IP address
	ipv4_netmask str		IP subnet mask
	dhcp bool		Use DHCP to configure IP address
	control_apps_use_mgmt_port bool		Control applications use management port
	default_gateway str		Set default gateway (Default gateway address)
ipv6 list			Field ipv6
	ipv6_addr str		Set the IPv6 address of an interface
	address_type str		‘link-local’= Configure an IPv6 link local address;
	v6_acl_name str		Apply ACL rules to incoming packets on this interface (Named Access List)
	inbound bool		ACL applied on incoming packets to this interface
	default_ipv6_gateway str		Set default gateway (Default gateway address)
action str			‘enable’= Enable Management Port; ‘disable’= Disable Management Port;
uuid str			uuid of the object
sampling_enable list			Field sampling_enable
	counters1 str		‘all’= all; ‘packets_input’= Input packets; ‘bytes_input’= Input bytes; ‘received_broadcasts’= Received broadcasts; ‘received_multicasts’= Received multicasts; ‘received_unicasts’= Received unicasts; ‘input_errors’= Input errors; ‘crc’= CRC; ‘frame’= Frames; ‘input_err_short’= Runts; ‘input_err_long’= Giants; ‘packets_output’= Output packets; ‘bytes_output’= Output bytes; ‘transmitted_broadcasts’= Transmitted broadcasts; ‘transmitted_multicasts’= Transmitted multicasts; ‘transmitted_unicasts’= Transmitted unicasts; ‘output_errors’= Output errors; ‘collisions’= Collisions;
lldp dict			Field lldp
	enable_cfg dict		Field enable_cfg
	notification_cfg dict		Field notification_cfg
	tx_dot1_cfg dict		Field tx_dot1_cfg
	tx_tlvs_cfg dict		Field tx_tlvs_cfg
	uuid str		uuid of the object
oper dict			Field oper
	interface str		Field interface
	state int		Field state
	line_protocol str		Field line_protocol
	link_type str		Field link_type
	mac str		Field mac
	ipv4_addr str		IP address
	ipv4_mask str		IP subnet mask
	ipv4_default_gateway str		IP gateway address
	ipv6_addr str		Field ipv6_addr
	ipv6_prefix str		Field ipv6_prefix
	ipv6_link_local str		Field ipv6_link_local
	ipv6_link_local_prefix str		Field ipv6_link_local_prefix
	ipv6_default_gateway str		Field ipv6_default_gateway
	speed str		Field speed
	duplexity str		Field duplexity
	mtu int		Field mtu
	flow_control int		Field flow_control
	ipv4_acl str		Field ipv4_acl
	ipv6_acl str		Field ipv6_acl
	dhcp_enabled int		Field dhcp_enabled
stats dict			Field stats
	packets_input str		Input packets
	bytes_input str		Input bytes
	received_broadcasts str		Received broadcasts
	received_multicasts str		Received multicasts
	received_unicasts str		Received unicasts
	input_errors str		Input errors
	crc str		CRC
	frame str		Frames
	input_err_short str		Runts
	input_err_long str		Giants
	packets_output str		Output packets
	bytes_output str		Output bytes
	transmitted_broadcasts str		Transmitted broadcasts
	transmitted_multicasts str		Transmitted multicasts
	transmitted_unicasts str		Transmitted unicasts
	output_errors str		Output errors
	collisions str		Collisions

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks