BGP Route Map

A BGP route map is used by the BGP route and can be applied on the attacked IP addresses in the zone for redirecting the traffic.

A route map consists of the following:

• Tag—A name of the route map.
• Action—The action to permit or deny the traffic.
• Sequence—An ordered sequence of clauses to either permit or deny the routes.

To create a Cloud Mitigation route, go to Configurations > BGP > Routes. For creating a Cloud Mitigation route, see Create a Cloud Mitigation Route.

To create a BGP Route Map, go to Configuration > BGP > Route Map. For creating a BGP Route Map, see Create a BGP Route Map.

To apply a BGP route map to a BGP route, go to Configuration > BGP > Route. For more information, see Create BGP Route.

You can also select a BGP route map on the Zone Operational Policy. For more information, see Configure Zone Operational Policy.

For detailed information about BGP Route Map, see DDoS Mitigation Guide.

The BGP Route Map page provides you a list of all the BGP routes maps created, the associated mitigator group, the operational status, and the actions that can be performed. You can add a sequence, edit the mitigator group, and delete a BGP route map configuration.

Table 132 : BGP Route Map Information

Table 131 : BGP Route Map Window

Column Heading	Description
Route Map	Displays the name of the BGP route map.
RTBH	Select the check box to create an RTBH route map. This route map also display whether any mitigation polices such as RTBH and Cloud Mitigation are applied.
Mitigator Group	Displays the mitigator group on which the BGP route map is applied. Route map can be applied on multiple mitigator groups. When a new mitigator is added to a mitigator group, the route map is automatically sent to the new mitigator.
Oper Status	Displays the operational status of the BGP route map deployment as follows: Device Error—Indicates the error has occurred on all the devices while configuring the BGP route map. Device Partial Error—Indicates the error has occurred on one or more devices while configuring the BGP route map. Out of Sync—Indicates the BGP route map changes are not yet synchronized with the device(s). OK—Indicates that the BGP route map has been successfully deployed to all the devices in the mitigator group. It can also indicate that the BGP route map has been created but not sent to the mitigator group yet.
Actions	Allows you to perform the following: Add Sequence Edit Mitigator Group