Create a Cloud Mitigation Route

Perform the following steps to create a Cloud Mitigation route:

1. Go to Configuration > BGP > Routes. Alternatively, click the Cloud Mitigation menu.
2. Click Create and select Cloud Mitigation Route to create a dedicated route for cloud mitigation.
3. On the Create Mitigation Route page, enter the following details:
   

Table 129 : Cloud Mitigation Route Fields

Field	Purpose
BGP Route Prefix	Enter an IPv4 address, which should have minimum /24 subnet.
Mitigator Group	Select a mitigator group. See Device Groups.
Route Map	BGP Route Map: Select a BGP Route Map for Cloud Mitigation. The route maps that are enabled for cloud mitigation and are associated with a mitigator group will be available for routing. To know how to create a BGP route map, see BGP Route Map. In order to create a BGP Route for Cloud Mitigation, first a Route Map must be created with "Cloud Mitigation" checkbox selected, see Create a BGP Route Map. NOTE: If a normal BGP route and a Cloud Mitigation route are created with the same BGP Route Prefix, the normal BGP route gets replaced by the latter. NOTE: If you enter an IP/subnet that is not part of any zone, a caution appears.
Auto remove on stop mitigation	Select this option to stop traffic routing from this route map when the mitigation stops.

4. Perform one of the following actions:

   • Save—Click Save to save your configuration to apply later.

   • Save & Deploy— Click Save & Deploy to save and deploy the Cloud Mitigated Route configuration on the mitigator devices.