a10_slb_common

Synopsis

SLB related commands

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
port_scan_detection str			‘enable’= Enable port scan detection; ‘disable’= Disable port scan detection(default);
ping_sweep_detection str			‘enable’= Enable ping sweep detection; ‘disable’= Disable ping sweep detection(default);
extended_stats bool			Enable global slb extended statistics
stats_data_disable bool			Disable global slb data statistics
graceful_shutdown_enable bool			Enable graceful shutdown
graceful_shutdown int			1-65535, in unit of seconds
entity str			‘server’= Graceful shutdown server/port only; ‘virtual-server’= Graceful shutdown virtual server/port only;
after_disable bool			Graceful shutdown after disable server/port and/or virtual server/port
rate_limit_logging bool			Configure rate limit logging
max_local_rate int			Set maximum local rate
max_remote_rate int			Set maximum remote rate
exclude_destination str			‘local’= Maximum local rate; ‘remote’= Maximum remote rate; (Maximum rates)
auto_translate_port bool			Auto Translate Port range
range int			auto translate port range
range_start int			port range start
range_end int			port range end
use_default_sess_count bool			Use default session count
per_thr_percent int			Percentage of default session count to use for per thread session table size
dsr_health_check_enable bool			Enable dsr-health-check (direct server return health check)
one_server_conn_hm_rate int			One Server Conn Health Check Rate
aflex_table_entry_aging_interval int			aFleX table entry aging interval in second
override_port bool			Enable override port in DSR health check mode
health_check_to_all_vip bool			Field health_check_to_all_vip
reset_stale_session bool			Send reset if session in delete queue receives a SYN packet
dns_cache_enable bool			Enable DNS cache
response_type str			‘single-answer’= Only cache DNS response with single answer; ‘round-robin’= Round robin;
ttl_threshold int			Only cache DNS response with longer TTL
dns_cache_aging_weight int			Set DNS cache entry weight, default is 1
dns_cache_age int			Set DNS cache entry age, default is 300 seconds (1-1000000 seconds, default is 300 seconds)
dns_cache_age_min_threshold int			Set DNS cache entry age minimum threshold, default is 0 seconds (1-1000000 seconds, default is 0 seconds)
compress_block_size int			Set compression block size (Compression block size in bytes)
dns_cache_entry_size int			Set DNS cache entry size, default is 256 bytes (1-4096 bytes, default is 256 bytes)
dns_vip_stateless bool			Enable DNS VIP stateless mode
honor_server_response_ttl bool			Honor the server reponse TTL
recursive_ns_cache str			‘honor-packet-ttl’= Honor the lowest TTL among NS records in the server response; ‘honor-age-config’= Honor the ttl/age settings based on acos dns cache configuration;
buff_thresh bool			Set buffer threshold
buff_thresh_hw_buff int			Set hardware buffer threshold
buff_thresh_relieve_thresh int			Relieve threshold
buff_thresh_sys_buff_low int			Set low water mark of system buffer
buff_thresh_sys_buff_high int			Set high water mark of system buffer
max_buff_queued_per_conn int			Set per connection buffer threshold (Buffer value range 128-4096)
pkt_rate_for_reset_unknown_conn int			Field pkt_rate_for_reset_unknown_conn
log_for_reset_unknown_conn bool			Log when rate exceed
gateway_health_check bool			Enable gateway health check
interval int			Specify the healthcheck interval, default is 5 seconds (Interval Value, in seconds (default 5))
timeout int			Specify the healthcheck timeout value, default is 15 seconds (Timeout Value, in seconds (default 15))
msl_time int			Configure maximum session life, default is 2 seconds (1-39 seconds, default is 2 seconds)
fast_path_disable bool			Disable fast path in SLB processing
http_fast_enable bool			Enable Http Fast in SLB processing
l2l3_trunk_lb_disable bool			Disable L2/L3 trunk LB
snat_gwy_for_l3 bool			Use source NAT gateway for L3 traffic for transparent mode
allow_in_gateway_mode bool			Use source NAT gateway for L3 traffic for gateway mode
disable_server_auto_reselect bool			Disable auto reselection of server
enable_l7_req_acct bool			Enable L7 request accounting
disable_adaptive_resource_check bool			Disable adaptive resource check based on buffer usage
ddos_pkt_size_thresh int			Set data packet size threshold for DDOS, default is 64 bytes
ddos_pkt_count_thresh int			Set packet count threshold for DDOS, default is 100
snat_on_vip bool			Enable source NAT traffic against VIP
low_latency bool			Enable low latency mode
mss_table int			Set MSS table (128-750, default is 536)
resolve_port_conflict bool			Enable client port service port conflicts
no_auto_up_on_aflex bool			Don’t automatically mark vport up when aFleX is bound
hw_compression bool			Use hardware compression
hw_syn_rr int			Configure hardware SYN round robin (range 1-500000)
max_http_header_count int			Set maximum number of HTTP headers allowed
scale_out bool			Enable SLB scale out
scale_out_traffic_map bool			Set SLB scaleout traffic-map
show_slb_server_legacy_cmd bool			Enable show slb server legacy command
show_slb_service_group_legacy_cmd bool			Enable show slb service-group legacy command
show_slb_virtual_server_legacy_cmd bool			Enable show slb virtual-server legacy command
traffic_map_type str			‘vport’= traffic-map per vport; ‘global’= global traffic-map;
sort_res bool			Enable SLB sorting of resource names
use_mss_tab bool			Use MSS based on internal table for SLB processing
auto_nat_no_ip_refresh str			‘enable’= enable; ‘disable’= disable;
ddos_protection dict			Field ddos_protection
	ipd_enable_toggle str		‘enable’= Enable SLB DDoS protection; ‘disable’= Disable SLB DDoS protection (default);
	logging dict		Field logging
	packets_per_second dict		Field packets_per_second
ssli_sni_hash_enable bool			Enable SSLi SNI hash table
ssli_cert_not_ready_inspect_timeout int			SSLI asynchronized connection timeout, default is 10 seconds (seconds, set to 0 for never timeout)
ssli_cert_not_ready_inspect_limit int			SSLI asynchronized connection max number, default is 2000 (set to 0 for unlimited size)
software bool			Software
software_tls13 bool			Software TLS1.3
QAT bool			HW assisted QAT SSL module
N5_new bool			HW assisted N5 SSL module with TLS 1.3 and TLS 1.2 support using OpenSSL 1.1.1
N5_old bool			HW assisted N5 SSL module with TLS 1.2 support using OpenSSL 0.9.7
substitute_source_mac bool			Substitute Source MAC Address to that of the outgoing interface
drop_icmp_to_vip_when_vip_down bool			Drop ICMP to VIP when VIP down
player_id_check_enable bool			Enable the Player id check
stateless_sg_multi_binding bool			Enable stateless service groups to be assigned to multiple L2/L3 DSR VIPs
ecmp_hash str			‘system-default’= Use system default ecmp hashing algorithm; ‘connection- based’= Use connection information for hashing;
service_group_on_no_dest_nat_vports str			‘allow-same’= Allow the binding service-group on no-dest-nat virtual ports; ‘enforce-different’= Enforce that the same service-group can not be bound on different no-dest-nat virtual ports;
disable_port_masking bool			Disable masking of ports for CPU hashing
snat_preserve dict			Field snat_preserve
	range list		Field range
disable_persist_scoring bool			Disable Persist Scoring
ipv4_offset int			IPv4 Octet Offset for Hash
pbslb_entry_age int			Set global pbslb entry age (minute)
uuid str			uuid of the object
aflex_table_entry_sync dict			Field aflex_table_entry_sync
	aflex_table_entry_sync_enable bool		Enable aflex table sync
	aflex_table_entry_sync_max_key_len int		aflex table entry max key length to sync
	aflex_table_entry_sync_max_value_len int		aflex table entry max value length to sync
	aflex_table_entry_sync_min_lifetime int		aflex table entry minimum lifetime to sync
	uuid str		uuid of the object
conn_rate_limit dict			Field conn_rate_limit
	src_ip_list list		Field src_ip_list
dns_response_rate_limiting dict			Field dns_response_rate_limiting
	max_table_entries int		Maximum number of entries allowed
	uuid str		uuid of the object
oper dict			Field oper
	server_auto_reselect int		Field server_auto_reselect

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks