To configure a CGNv6 Server:
The following fields are available for the configuration:
|
Field |
Description |
|---|---|
|
Name |
Specify CGNv6 server name to identify the real server. The name is not required to be the hostname configured on the real server. You can specify a value between 1 to 127 characters. |
|
Type |
Specify protocol type on which the server listens for traffic. The following options are available:
|
|
Host |
Specify the IPv4 address. This field is enabled only when you select the Type as IPv4. |
|
Server IPv6 Address |
Specify the IPv6 address. This field is enabled only when you select the Type as IPv6. |
|
FQDN Name |
Specify the fully qualified server name. This field is enabled only when you select the Type as FQDN. |
|
Action |
Enable or disable a CGNv6 server. |
|
Health Check |
Enable or disable health check. |
|
Health Monitor |
Select a health monitor from the drop-down list. This field is enabled only when the Health Check field is enabled. Click the + Add icon to configure a health monitor. |
|
Action |
Click Create to configure a server port. |
| Add Server Port | |
|
Port Number |
Configure a port number for server. You can specify a value between 0 - 65534. The default port is 65534. |
|
Protocol |
Configure a protocol type. Layer 4 transport protocol used by the port. The TCP or UDP port on which the server listens for traffic. |
|
Action |
Enable or disable a server. |
|
Health Check |
Enable or disable health check. |
|
Health Monitor |
Select a health monitor from the drop-down list. This field is enabled only when the Health Check field is enabled. Click the + Add icon to configure a health monitor. |
Under the CGNv6 Port section, select a required port to perform edit or delete actions for a CGNv6 port.