a10_visibility_packet_capture_object_templates_templ_gtp_plcy_tmpl
Synopsis
Configure template for template.gtp-policy
Parameters
Parameters |
Choices/Defaults |
Comment |
|
---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
name str/required |
Packet Capture Template Name |
||
capture_config str |
Specify name of the capture-config to use with this template |
||
uuid str |
uuid of the object |
||
user_tag str |
Customized tag |
||
trigger_stats_severity dict |
Field trigger_stats_severity |
||
error bool |
Enable packet capture on all error counters (Default disabled) |
||
error_alert bool |
Enable packet capture on all alert error counters (Default disabled) |
||
error_warning bool |
Enable packet capture on all warning error counters (Default disabled) |
||
error_critical bool |
Enable packet capture on all critical error counters (Default disabled) |
||
drop bool |
Enable packet capture on all drop counters (Default disabled) |
||
drop_alert bool |
Enable packet capture on all alert drop counters (Default disabled) |
||
drop_warning bool |
Enable packet capture on all warning drop counters (Default disabled) |
||
drop_critical bool |
Enable packet capture on all critical drop counters (Default disabled) |
||
uuid str |
uuid of the object |
||
trigger_stats_inc dict |
Field trigger_stats_inc |
||
drop_vld_gtp_ie_repeat_count_exceed bool |
Enable automatic packet-capture for Validation Drop= GTP repeated IE count exceeded |
||
drop_vld_reserved_field_set bool |
Enable automatic packet-capture for Validation Drop= Reserved Header Field Set |
||
drop_vld_tunnel_id_flag bool |
Enable automatic packet-capture for Validation Drop= Tunnel Header Flag Not Set |
||
drop_vld_invalid_flow_label_v0 bool |
Enable automatic packet-capture for Validation Drop= Invalid Flow Label in GTPv0-C Header |
||
drop_vld_invalid_teid bool |
Enable automatic packet-capture for Validation Drop= Invalid TEID Value |
||
drop_vld_out_of_state bool |
Enable automatic packet-capture for Validation Drop= Out Of State GTP Message |
||
drop_vld_mandatory_information_element bool |
Enable automatic packet-capture for Validation Drop= Mandatory IE Not Present |
||
drop_vld_mandatory_ie_in_grouped_ie bool |
Enable automatic packet-capture for Validation Drop= Mandatory IE in Grouped IE Not Present |
||
drop_vld_out_of_order_ie bool |
Enable automatic packet-capture for Validation Drop= GTPv1-C Message Out of Order IE |
||
drop_vld_out_of_state_ie bool |
Enable automatic packet-capture for Validation Drop= Unexpected IE Present in Message |
||
drop_vld_reserved_information_element bool |
Enable automatic packet-capture for Validation Drop= Reserved IE Field Present |
||
drop_vld_version_not_supported bool |
Enable automatic packet-capture for Validation Drop= Invalid GTP version |
||
drop_vld_message_length bool |
Enable automatic packet-capture for Validation Drop= Message Length Exceeded |
||
drop_vld_cross_layer_correlation bool |
Enable automatic packet-capture for Validation Drop= Cross Layer IP Address Mismatch |
||
drop_vld_country_code_mismatch bool |
Enable automatic packet-capture for Validation Drop= Country Code Mismatch in IMSI and MSISDN |
||
drop_vld_gtp_u_spoofed_source_address bool |
Enable automatic packet-capture for Validation Drop= GTP-U IP Address Spoofed |
||
drop_vld_gtp_bearer_count_exceed bool |
Enable automatic packet-capture for Validation Drop= GTP Bearer count exceeded max (11) |
||
drop_vld_gtp_v2_wrong_lbi_create_bearer bool |
Enable automatic packet-capture for Validation Drop= GTPV2-C Wrong LBI in Create Bearer Request |
||
drop_vld_v0_reserved_message_drop bool |
Enable automatic packet-capture for Validation Drop= GTPv0-C Reserved Message Drop |
||
drop_vld_v1_reserved_message_drop bool |
Enable automatic packet-capture for Validation Drop= GTPv1-C Reserved Message Drop |
||
drop_vld_v2_reserved_message_drop bool |
Enable automatic packet-capture for Validation Drop= GTPv2-C Reserved Message Drop |
||
drop_vld_invalid_pkt_len_piggyback bool |
Enable automatic packet-capture for Validation Drop= Piggyback message invalid packet length |
||
drop_vld_sanity_failed_piggyback bool |
Enable automatic packet-capture for Validation Drop= piggyback message anomaly failed |
||
drop_vld_sequence_num_correlation bool |
Enable automatic packet-capture for Validation Drop= GTP-C Sequence number Mismatch |
||
drop_vld_gtpv0_seqnum_buffer_full bool |
Enable automatic packet-capture for Validation Drop= GTPV0-C conn Sequence number Buffer Full |
||
drop_vld_gtpv1_seqnum_buffer_full bool |
Enable automatic packet-capture for Validation Drop= GTPV1-C conn Sequence number Buffer Full |
||
drop_vld_gtpv2_seqnum_buffer_full bool |
Enable automatic packet-capture for Validation Drop= GTPV2-C conn Sequence number Buffer Full |
||
drop_vld_gtp_invalid_imsi_len_drop bool |
Enable automatic packet-capture for Validation Drop= GTP-C Invalid IMSI Length Drop |
||
drop_vld_gtp_invalid_apn_len_drop bool |
Enable automatic packet-capture for Validation Drop= GTP-C Invalid APN Length Drop |
||
drop_vld_protocol_flag_unset bool |
Enable automatic packet-capture for Validation Drop= Protocol flag in Header Field not Set |
||
uuid str |
uuid of the object |
||
trigger_stats_rate dict |
Field trigger_stats_rate |
||
threshold_exceeded_by int |
Set the threshold to the number of times greater than the previous duration to start the capture, default is 5 |
||
duration int |
Time in seconds to look for the anomaly, default is 60 |
||
drop_vld_gtp_ie_repeat_count_exceed bool |
Enable automatic packet-capture for Validation Drop= GTP repeated IE count exceeded |
||
drop_vld_reserved_field_set bool |
Enable automatic packet-capture for Validation Drop= Reserved Header Field Set |
||
drop_vld_tunnel_id_flag bool |
Enable automatic packet-capture for Validation Drop= Tunnel Header Flag Not Set |
||
drop_vld_invalid_flow_label_v0 bool |
Enable automatic packet-capture for Validation Drop= Invalid Flow Label in GTPv0-C Header |
||
drop_vld_invalid_teid bool |
Enable automatic packet-capture for Validation Drop= Invalid TEID Value |
||
drop_vld_out_of_state bool |
Enable automatic packet-capture for Validation Drop= Out Of State GTP Message |
||
drop_vld_mandatory_information_element bool |
Enable automatic packet-capture for Validation Drop= Mandatory IE Not Present |
||
drop_vld_mandatory_ie_in_grouped_ie bool |
Enable automatic packet-capture for Validation Drop= Mandatory IE in Grouped IE Not Present |
||
drop_vld_out_of_order_ie bool |
Enable automatic packet-capture for Validation Drop= GTPv1-C Message Out of Order IE |
||
drop_vld_out_of_state_ie bool |
Enable automatic packet-capture for Validation Drop= Unexpected IE Present in Message |
||
drop_vld_reserved_information_element bool |
Enable automatic packet-capture for Validation Drop= Reserved IE Field Present |
||
drop_vld_version_not_supported bool |
Enable automatic packet-capture for Validation Drop= Invalid GTP version |
||
drop_vld_message_length bool |
Enable automatic packet-capture for Validation Drop= Message Length Exceeded |
||
drop_vld_cross_layer_correlation bool |
Enable automatic packet-capture for Validation Drop= Cross Layer IP Address Mismatch |
||
drop_vld_country_code_mismatch bool |
Enable automatic packet-capture for Validation Drop= Country Code Mismatch in IMSI and MSISDN |
||
drop_vld_gtp_u_spoofed_source_address bool |
Enable automatic packet-capture for Validation Drop= GTP-U IP Address Spoofed |
||
drop_vld_gtp_bearer_count_exceed bool |
Enable automatic packet-capture for Validation Drop= GTP Bearer count exceeded max (11) |
||
drop_vld_gtp_v2_wrong_lbi_create_bearer bool |
Enable automatic packet-capture for Validation Drop= GTPV2-C Wrong LBI in Create Bearer Request |
||
drop_vld_v0_reserved_message_drop bool |
Enable automatic packet-capture for Validation Drop= GTPv0-C Reserved Message Drop |
||
drop_vld_v1_reserved_message_drop bool |
Enable automatic packet-capture for Validation Drop= GTPv1-C Reserved Message Drop |
||
drop_vld_v2_reserved_message_drop bool |
Enable automatic packet-capture for Validation Drop= GTPv2-C Reserved Message Drop |
||
drop_vld_invalid_pkt_len_piggyback bool |
Enable automatic packet-capture for Validation Drop= Piggyback message invalid packet length |
||
drop_vld_sanity_failed_piggyback bool |
Enable automatic packet-capture for Validation Drop= piggyback message anomaly failed |
||
drop_vld_sequence_num_correlation bool |
Enable automatic packet-capture for Validation Drop= GTP-C Sequence number Mismatch |
||
drop_vld_gtpv0_seqnum_buffer_full bool |
Enable automatic packet-capture for Validation Drop= GTPV0-C conn Sequence number Buffer Full |
||
drop_vld_gtpv1_seqnum_buffer_full bool |
Enable automatic packet-capture for Validation Drop= GTPV1-C conn Sequence number Buffer Full |
||
drop_vld_gtpv2_seqnum_buffer_full bool |
Enable automatic packet-capture for Validation Drop= GTPV2-C conn Sequence number Buffer Full |
||
drop_vld_gtp_invalid_imsi_len_drop bool |
Enable automatic packet-capture for Validation Drop= GTP-C Invalid IMSI Length Drop |
||
drop_vld_gtp_invalid_apn_len_drop bool |
Enable automatic packet-capture for Validation Drop= GTP-C Invalid APN Length Drop |
||
drop_vld_protocol_flag_unset bool |
Enable automatic packet-capture for Validation Drop= Protocol flag in Header Field not Set |
||
uuid str |
uuid of the object |
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.