a10_visibility_packet_capture_object_templates_cgnv6_encap_domain_tmpl

Synopsis 

Configure template for cgnv6.map.encapsulation.domain

Parameters 

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
name str/required			Packet Capture Template Name
capture_config str			Specify name of the capture-config to use with this template
uuid str			uuid of the object
user_tag str			Customized tag
trigger_stats_severity dict			Field trigger_stats_severity
	error bool		Enable packet capture on all error counters (Default disabled)
	error_alert bool		Enable packet capture on all alert error counters (Default disabled)
	error_warning bool		Enable packet capture on all warning error counters (Default disabled)
	error_critical bool		Enable packet capture on all critical error counters (Default disabled)
	drop bool		Enable packet capture on all drop counters (Default disabled)
	drop_alert bool		Enable packet capture on all alert drop counters (Default disabled)
	drop_warning bool		Enable packet capture on all warning drop counters (Default disabled)
	drop_critical bool		Enable packet capture on all critical drop counters (Default disabled)
	uuid str		uuid of the object
trigger_stats_inc dict			Field trigger_stats_inc
	inbound_addr_port_validation_failed bool		Enable automatic packet-capture for Inbound IPv4 Destination Address Port Validation Failed
	inbound_rev_lookup_failed bool		Enable automatic packet-capture for Inbound IPv4 Reverse Route Lookup Failed
	inbound_dest_unreachable bool		Enable automatic packet-capture for Inbound IPv6 Destination Address Unreachable
	outbound_addr_validation_failed bool		Enable automatic packet-capture for Outbound IPv6 Source Address Validation Failed
	outbound_rev_lookup_failed bool		Enable automatic packet-capture for Outbound IPv6 Reverse Route Lookup Failed
	outbound_dest_unreachable bool		Enable automatic packet-capture for Outbound IPv4 Destination Address Unreachable
	packet_mtu_exceeded bool		Enable automatic packet-capture for Packet Exceeded MTU
	interface_not_configured bool		Enable automatic packet-capture for Interfaces not Configured Dropped
	uuid str		uuid of the object
trigger_stats_rate dict			Field trigger_stats_rate
	threshold_exceeded_by int		Set the threshold to the number of times greater than the previous duration to start the capture, default is 5
	duration int		Time in seconds to look for the anomaly, default is 60
	inbound_addr_port_validation_failed bool		Enable automatic packet-capture for Inbound IPv4 Destination Address Port Validation Failed
	inbound_rev_lookup_failed bool		Enable automatic packet-capture for Inbound IPv4 Reverse Route Lookup Failed
	inbound_dest_unreachable bool		Enable automatic packet-capture for Inbound IPv6 Destination Address Unreachable
	outbound_addr_validation_failed bool		Enable automatic packet-capture for Outbound IPv6 Source Address Validation Failed
	outbound_rev_lookup_failed bool		Enable automatic packet-capture for Outbound IPv6 Reverse Route Lookup Failed
	outbound_dest_unreachable bool		Enable automatic packet-capture for Outbound IPv4 Destination Address Unreachable
	packet_mtu_exceeded bool		Enable automatic packet-capture for Packet Exceeded MTU
	interface_not_configured bool		Enable automatic packet-capture for Interfaces not Configured Dropped
	uuid str		uuid of the object

Examples 

Return Values 

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’]): The AXAPI endpoint being accessed.
http_method (, str, [‘POST’, ‘GET’]): HTTP method being used by the primary task to interact with the AXAPI endpoint.
request_body (, complex, ): Params used to query the AXAPI
response_body (, complex, ): Response from the AXAPI

Status 

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.

Authors

A10 Networks