a10_interface_tunnel

Synopsis 

Tunnel interface

Parameters 

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
ifnum int/required			Tunnel interface number
name str			Name for the interface
mtu int			Interface mtu (Interface MTU, default 1 (min MTU is 1280 for IPv6))
action str			‘enable’= Enable; ‘disable’= Disable;
speed int			Speed in Gbit/Sec (Default 10 Gbps)
load_interval int			Configure Load Interval (Seconds (5-300, Multiple of 5), default 300)
security_level int			Configure security level for interface. 100 - Most Secure
uuid str			uuid of the object
user_tag str			Customized tag
sampling_enable list			Field sampling_enable
	counters1 str		‘all’= all; ‘num-rx-pkts’= received packets; ‘num-total-rx-bytes’= received bytes; ‘num-tx-pkts’= sent packets; ‘num-total-tx-bytes’= sent bytes; ‘num-rx- err-pkts’= received error packets; ‘num-tx-err-pkts’= sent error packets; ‘rate_pkt_sent’= Packet sent rate packets/sec; ‘rate_byte_sent’= Byte sent rate bits/sec; ‘rate_pkt_rcvd’= Packet received rate packets/sec; ‘rate_byte_rcvd’= Byte received rate bits/sec;
packet_capture_template str			Name of the packet capture template to be bind with this object
ip dict			Field ip
	address dict		Field address
	generate_membership_query bool		Enable Membership Query
	generate_membership_query_val int		1 - 255 (Default is 125)
	max_resp_time int		Max Response Time (Default is 100)
	inside bool		Configure interface as inside
	outside bool		Configure interface as outside
	uuid str		uuid of the object
	rip dict		Field rip
	ospf dict		Field ospf
ipv6 dict			Field ipv6
	address_cfg list		Field address_cfg
	ipv6_enable bool		Enable IPv6 processing
	inside bool		Configure interface as inside
	outside bool		Configure interface as outside
	uuid str		uuid of the object
	router dict		Field router
	ospf dict		Field ospf
map dict			Field map
	inside bool		Configure MAP inside interface (connected to MAP domains)
	outside bool		Configure MAP outside interface
	map_t_inside bool		Configure MAP inside interface (connected to MAP domains)
	map_t_outside bool		Configure MAP outside interface
	uuid str		uuid of the object
lw_4o6 dict			Field lw_4o6
	outside bool		Configure LW-4over6 inside interface
	inside bool		Configure LW-4over6 outside interface
	uuid str		uuid of the object
oper dict			Field oper
	state str		Field state
	line_protocol str		Field line_protocol
	link_type str		Field link_type
	mac str		Field mac
	config_speed int		Field config_speed
	ipv4_address str		IPv4 address
	ipv4_netmask str		IPv4 subnet mask
	ipv6_link_local str		Field ipv6_link_local
	ipv6_link_local_prefix str		Field ipv6_link_local_prefix
	ipv6_link_local_type str		Field ipv6_link_local_type
	ipv6_link_local_scope str		Field ipv6_link_local_scope
	ipv4_addr_count int		Field ipv4_addr_count
	ipv4_list list		Field ipv4_list
	ipv6_addr_count int		Field ipv6_addr_count
	ipv6_list list		Field ipv6_list
	ifnum int		Tunnel interface number
stats dict			Field stats
	num_rx_pkts str		received packets
	num_total_rx_bytes str		received bytes
	num_tx_pkts str		sent packets
	num_total_tx_bytes str		sent bytes
	num_rx_err_pkts str		received error packets
	num_tx_err_pkts str		sent error packets
	rate_pkt_sent str		Packet sent rate packets/sec
	rate_byte_sent str		Byte sent rate bits/sec
	rate_pkt_rcvd str		Packet received rate packets/sec
	rate_byte_rcvd str		Byte received rate bits/sec
	ifnum int		Tunnel interface number

Examples 

Return Values 

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’]): The AXAPI endpoint being accessed.
http_method (, str, [‘POST’, ‘GET’]): HTTP method being used by the primary task to interact with the AXAPI endpoint.
request_body (, complex, ): Params used to query the AXAPI
response_body (, complex, ): Response from the AXAPI

Status 

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.

Authors

A10 Networks