a10_interface_ethernet_ipv6
Synopsis
Global IPv6 configuration subcommands
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
ethernet_ifnum str/required |
Key to identify parent object |
||
address_list list |
Field address_list |
||
ipv6_addr str |
Set the IPv6 address of an interface |
||
address_type str |
‘anycast’= Configure an IPv6 anycast address; ‘link-local’= Configure an IPv6 link local address; |
||
inside bool |
Configure interface as inside |
||
outside bool |
Configure interface as outside |
||
ipv6_enable bool |
Enable IPv6 processing |
||
ttl_ignore bool |
Ignore TTL decrement for a received packet before sending out |
||
access_list_cfg dict |
Field access_list_cfg |
||
v6_acl_name str |
Apply ACL rules to incoming packets on this interface (Named Access List) |
||
inbound bool |
ACL applied on incoming packets to this interface |
||
router_adver dict |
Field router_adver |
||
action str |
‘enable’= Enable Router Advertisements on this interface; ‘disable’= Disable Router Advertisements on this interface; |
||
hop_limit int |
Set Router Advertisement Hop Limit (default= 255) |
||
max_interval int |
Set Router Advertisement Max Interval (default= 600) (Max Router Advertisement Interval (seconds)) |
||
min_interval int |
Set Router Advertisement Min Interval (default= 200) (Min Router Advertisement Interval (seconds)) |
||
default_lifetime int |
Set Router Advertisement Default Lifetime (default= 1800) (Default Lifetime (seconds)) |
||
rate_limit int |
Rate Limit the processing of incoming Router Solicitations (Max Number of Router Solicitations to process per second) |
||
reachable_time int |
Set Router Advertisement Reachable ime (default= 0) (Reachable Time (milliseconds)) |
||
retransmit_timer int |
Set Router Advertisement Retransmit Timer (default= 0) |
||
adver_mtu_disable bool |
Disable Router Advertisement MTU Option |
||
adver_mtu int |
Set Router Advertisement MTU Option |
||
prefix_list list |
Field prefix_list |
||
managed_config_action str |
‘enable’= Enable the Managed Address Configuration flag; ‘disable’= Disable the Managed Address Configuration flag (default); |
||
other_config_action str |
‘enable’= Enable the Other Stateful Configuration flag; ‘disable’= Disable the Other Stateful Configuration flag (default); |
||
adver_vrid int |
Specify ha VRRP-A vrid |
||
use_floating_ip bool |
Use a floating IP as the source address for Router advertisements |
||
floating_ip str |
Use a floating IP as the source address for Router advertisements |
||
adver_vrid_default bool |
Default VRRP-A vrid |
||
use_floating_ip_default_vrid bool |
Use a floating IP as the source address for Router advertisements |
||
floating_ip_default_vrid str |
Use a floating IP as the source address for Router advertisements |
||
uuid str |
uuid of the object |
||
stateful_firewall dict |
Field stateful_firewall |
||
inside bool |
Inside (private) interface for stateful firewall |
||
class_list str |
Class List (Class List Name) |
||
outside bool |
Outside (public) interface for stateful firewall |
||
access_list bool |
Access-list for traffic from the outside |
||
acl_name str |
Access-list Name |
||
uuid str |
uuid of the object |
||
router dict |
Field router |
||
ripng dict |
Field ripng |
||
ospf dict |
Field ospf |
||
isis dict |
Field isis |
||
rip dict |
Field rip |
||
split_horizon_cfg dict |
Field split_horizon_cfg |
||
uuid str |
uuid of the object |
||
ospf dict |
Field ospf |
||
network_list list |
Field network_list |
||
bfd bool |
Bidirectional Forwarding Detection (BFD) |
||
disable bool |
Disable BFD |
||
cost_cfg list |
Field cost_cfg |
||
dead_interval_cfg list |
Field dead_interval_cfg |
||
hello_interval_cfg list |
Field hello_interval_cfg |
||
mtu_ignore_cfg list |
Field mtu_ignore_cfg |
||
neighbor_cfg list |
Field neighbor_cfg |
||
priority_cfg list |
Field priority_cfg |
||
retransmit_interval_cfg list |
Field retransmit_interval_cfg |
||
transmit_delay_cfg list |
Field transmit_delay_cfg |
||
uuid str |
uuid of the object |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.