a10_interface_ve
Synopsis
Virtual ethernet interface
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
ifnum int/required |
Virtual ethernet interface number |
||
name str |
Name for the interface |
||
port_scan_detection str |
‘enable’= Enable port scan detection; ‘disable’= Disable port scan detection(default); |
||
ping_sweep_detection str |
‘enable’= Enable ping sweep detection; ‘disable’= Disable ping sweep detection(default); |
||
l3_vlan_fwd_disable bool |
Disable L3 forwarding between VLANs for incoming packets on this interface |
||
mtu int |
Interface mtu (Interface MTU, default 1 (min MTU is 1280 for IPv6)) |
||
trap_source bool |
The trap source |
||
action str |
‘enable’= Enable; ‘disable’= Disable; |
||
icmp_rate_limit dict |
Field icmp_rate_limit |
||
normal int |
Normal rate limit. If exceeds this limit, drop the ICMP packet that goes over the limit |
||
lockup int |
Enter lockup state when ICMP rate exceeds lockup rate limit (Maximum rate limit. If exceeds this limit, drop all ICMP packet for a time period) |
||
lockup_period int |
Lockup period (second) |
||
icmpv6_rate_limit dict |
Field icmpv6_rate_limit |
||
normal_v6 int |
Normal rate limit. If exceeds this limit, drop the ICMP packet that goes over the limit |
||
lockup_v6 int |
Enter lockup state when ICMP rate exceeds lockup rate limit (Maximum rate limit. If exceeds this limit, drop all ICMP packet for a time period) |
||
lockup_period_v6 int |
Lockup period (second) |
||
access_list dict |
Field access_list |
||
acl_id int |
ACL id |
||
acl_name str |
Named Access List |
||
uuid str |
uuid of the object |
||
user_tag str |
Customized tag |
||
sampling_enable list |
Field sampling_enable |
||
counters1 str |
‘all’= all; ‘num_pkts’= Input packets; ‘num_total_bytes’= Input bytes; ‘num_unicast_pkts’= Received unicasts; ‘num_broadcast_pkts’= Received broadcasts; ‘num_multicast_pkts’= Received multicasts; ‘num_tx_pkts’= Transmitted packets; ‘num_total_tx_bytes’= Transmitted bytes; ‘num_unicast_tx_pkts’= Transmitted unicasts; ‘num_broadcast_tx_pkts’= Transmitted broadcasts; ‘num_multicast_tx_pkts’= Transmitted multicasts; ‘rate_pkt_sent’= Packet sent rate packets/sec; ‘rate_byte_sent’= Byte sent rate bits/sec; ‘rate_pkt_rcvd’= Packet received rate packets/sec; ‘rate_byte_rcvd’= Byte received rate bits/sec; ‘load_interval’= Load Interval; |
||
ip dict |
Field ip |
||
dhcp bool |
Use DHCP to configure IP address |
||
address_list list |
Field address_list |
||
allow_promiscuous_vip bool |
Allow traffic to be associated with promiscuous VIP |
||
client bool |
Client facing interface for IPv4/v6 traffic |
||
server bool |
Server facing interface for IPv4/v6 traffic |
||
dmz bool |
DMZ network facing interface for IPv4/v6 traffic |
||
helper_address_list list |
Field helper_address_list |
||
inside bool |
Configure interface as inside |
||
outside bool |
Configure interface as outside |
||
ttl_ignore bool |
Ignore TTL decrement for a received packet |
||
syn_cookie bool |
Enable SYN-cookie on the interface |
||
slb_partition_redirect bool |
Redirect SLB traffic across partition |
||
generate_membership_query bool |
Enable Membership Query |
||
query_interval int |
1 - 255 (Default is 125) |
||
max_resp_time int |
Maximum Response Time (Max Response Time (Default is 100)) |
||
unnumbered bool |
Set the interface as unnumbered |
||
uuid str |
uuid of the object |
||
stateful_firewall dict |
Field stateful_firewall |
||
router dict |
Field router |
||
rip dict |
Field rip |
||
ospf dict |
Field ospf |
||
ipv6 dict |
Field ipv6 |
||
address_list list |
Field address_list |
||
ipv6_enable bool |
Enable IPv6 processing |
||
v6_acl_name str |
Apply ACL rules to incoming packets on this interface (Named Access List) |
||
inbound bool |
ACL applied on incoming packets to this interface |
||
inside bool |
Configure interface as NAT inside |
||
outside bool |
Configure interface as NAT outside |
||
ttl_ignore bool |
Ignore TTL decrement for a received packet |
||
router_adver dict |
Field router_adver |
||
uuid str |
uuid of the object |
||
stateful_firewall dict |
Field stateful_firewall |
||
router dict |
Field router |
||
rip dict |
Field rip |
||
ospf dict |
Field ospf |
||
ddos dict |
Field ddos |
||
outside bool |
DDoS inside (trusted) or outside (untrusted) interface |
||
inside bool |
DDoS inside (trusted) or outside (untrusted) interface |
||
uuid str |
uuid of the object |
||
nptv6 dict |
Field nptv6 |
||
domain_list list |
Field domain_list |
||
map dict |
Field map |
||
inside bool |
Configure MAP inside interface (connected to MAP domains) |
||
outside bool |
Configure MAP outside interface |
||
map_t_inside bool |
Configure MAP inside interface (connected to MAP domains) |
||
map_t_outside bool |
Configure MAP outside interface |
||
uuid str |
uuid of the object |
||
lw_4o6 dict |
Field lw_4o6 |
||
outside bool |
Configure LW-4over6 inside interface |
||
inside bool |
Configure LW-4over6 outside interface |
||
uuid str |
uuid of the object |
||
bfd dict |
Field bfd |
||
authentication dict |
Field authentication |
||
echo bool |
Enable BFD Echo |
||
demand bool |
Demand mode |
||
interval_cfg dict |
Field interval_cfg |
||
uuid str |
uuid of the object |
||
isis dict |
Field isis |
||
authentication dict |
Field authentication |
||
bfd_cfg dict |
Field bfd_cfg |
||
circuit_type str |
‘level-1’= Level-1 only adjacencies are formed; ‘level-1-2’= Level-1-2 adjacencies are formed; ‘level-2-only’= Level-2 only adjacencies are formed; |
||
csnp_interval_list list |
Field csnp_interval_list |
||
padding bool |
Add padding to IS-IS hello packets |
||
hello_interval_list list |
Field hello_interval_list |
||
hello_interval_minimal_list list |
Field hello_interval_minimal_list |
||
hello_multiplier_list list |
Field hello_multiplier_list |
||
lsp_interval int |
Set LSP transmission interval (LSP transmission interval (milliseconds)) |
||
mesh_group dict |
Field mesh_group |
||
metric_list list |
Field metric_list |
||
network str |
‘broadcast’= Specify IS-IS broadcast multi-access network; ‘point-to-point’= Specify IS-IS point-to-point network; |
||
password_list list |
Field password_list |
||
priority_list list |
Field priority_list |
||
retransmit_interval int |
Set per-LSP retransmission interval (Interval between retransmissions of the same LSP (seconds)) |
||
wide_metric_list list |
Field wide_metric_list |
||
uuid str |
uuid of the object |
||
oper dict |
Field oper |
||
state str |
Field state |
||
line_protocol str |
Field line_protocol |
||
link_type str |
Field link_type |
||
mac str |
Field mac |
||
ipv4_address str |
IP address |
||
ipv4_netmask str |
IP subnet mask |
||
ipv6_link_local str |
Field ipv6_link_local |
||
ipv6_link_local_prefix str |
Field ipv6_link_local_prefix |
||
ipv6_link_local_type str |
Field ipv6_link_local_type |
||
ipv6_link_local_scope str |
Field ipv6_link_local_scope |
||
ipv4_addr_count int |
Field ipv4_addr_count |
||
ipv4_list list |
Field ipv4_list |
||
ipv6_addr_count int |
Field ipv6_addr_count |
||
ipv6_list list |
Field ipv6_list |
||
igmp_query_sent int |
Field igmp_query_sent |
||
icmp_rate_limit_current int |
Field icmp_rate_limit_current |
||
icmp_rate_over_limit_drop int |
Field icmp_rate_over_limit_drop |
||
icmp6_rate_limit_current int |
Field icmp6_rate_limit_current |
||
icmp6_rate_over_limit_drop int |
Field icmp6_rate_over_limit_drop |
||
user_trunk_id int |
Field user_trunk_id |
||
ip_unnumbered_oper int |
Field ip_unnumbered_oper |
||
ip_unnumbered_enabled int |
Field ip_unnumbered_enabled |
||
ip_unnumbered_mac_learned int |
Field ip_unnumbered_mac_learned |
||
ip_unnumbered_peer_lla str |
Field ip_unnumbered_peer_lla |
||
ifnum int |
Virtual ethernet interface number |
||
stats dict |
Field stats |
||
num_pkts str |
Input packets |
||
num_total_bytes str |
Input bytes |
||
num_unicast_pkts str |
Received unicasts |
||
num_broadcast_pkts str |
Received broadcasts |
||
num_multicast_pkts str |
Received multicasts |
||
num_tx_pkts str |
Transmitted packets |
||
num_total_tx_bytes str |
Transmitted bytes |
||
num_unicast_tx_pkts str |
Transmitted unicasts |
||
num_broadcast_tx_pkts str |
Transmitted broadcasts |
||
num_multicast_tx_pkts str |
Transmitted multicasts |
||
rate_pkt_sent str |
Packet sent rate packets/sec |
||
rate_byte_sent str |
Byte sent rate bits/sec |
||
rate_pkt_rcvd str |
Packet received rate packets/sec |
||
rate_byte_rcvd str |
Byte received rate bits/sec |
||
load_interval str |
Load Interval |
||
ifnum int |
Virtual ethernet interface number |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.