a10_interface_management
Synopsis
Management interface
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
access_list dict |
Field access_list |
||
acl_id int |
ACL id |
||
acl_name str |
Apply an access list (Named Access List) |
||
duplexity str |
‘Full’= Full; ‘Half’= Half; ‘auto’= Auto; |
||
speed str |
‘10’= 10 Mbs/sec; ‘100’= 100 Mbs/sec; ‘1000’= 1 Gb/sec; ‘auto’= Auto Negotiate Speed; (Interface Speed) |
||
flow_control bool |
Enable 802.3x flow control on full duplex port |
||
broadcast_rate_limit dict |
Field broadcast_rate_limit |
||
bcast_rate_limit_enable bool |
Rate limit the l2 broadcast packet on mgmt port |
||
rate int |
packets per second. Default is 500. (packets per second. Please specify an even number. Default is 500) |
||
mtu int |
Interface mtu (Interface MTU, default 1 (min MTU is 1280 for IPv6)) |
||
ip dict |
Field ip |
||
ipv4_address str |
IP address |
||
ipv4_netmask str |
IP subnet mask |
||
dhcp bool |
Use DHCP to configure IP address |
||
control_apps_use_mgmt_port bool |
Control applications use management port |
||
default_gateway str |
Set default gateway (Default gateway address) |
||
secondary_ip dict |
Field secondary_ip |
||
secondary_ip bool |
Global IP configuration subcommands |
||
ipv4_address str |
IP address |
||
ipv4_netmask str |
IP subnet mask |
||
dhcp bool |
Use DHCP to configure IP address |
||
control_apps_use_mgmt_port bool |
Control applications use management port |
||
default_gateway str |
Set default gateway (Default gateway address) |
||
ipv6 list |
Field ipv6 |
||
ipv6_addr str |
Set the IPv6 address of an interface |
||
address_type str |
‘link-local’= Configure an IPv6 link local address; |
||
v6_acl_name str |
Apply ACL rules to incoming packets on this interface (Named Access List) |
||
inbound bool |
ACL applied on incoming packets to this interface |
||
default_ipv6_gateway str |
Set default gateway (Default gateway address) |
||
action str |
‘enable’= Enable Management Port; ‘disable’= Disable Management Port; |
||
uuid str |
uuid of the object |
||
sampling_enable list |
Field sampling_enable |
||
counters1 str |
‘all’= all; ‘packets_input’= Input packets; ‘bytes_input’= Input bytes; ‘received_broadcasts’= Received broadcasts; ‘received_multicasts’= Received multicasts; ‘received_unicasts’= Received unicasts; ‘input_errors’= Input errors; ‘crc’= CRC; ‘frame’= Frames; ‘input_err_short’= Runts; ‘input_err_long’= Giants; ‘packets_output’= Output packets; ‘bytes_output’= Output bytes; ‘transmitted_broadcasts’= Transmitted broadcasts; ‘transmitted_multicasts’= Transmitted multicasts; ‘transmitted_unicasts’= Transmitted unicasts; ‘output_errors’= Output errors; ‘collisions’= Collisions; |
||
lldp dict |
Field lldp |
||
enable_cfg dict |
Field enable_cfg |
||
notification_cfg dict |
Field notification_cfg |
||
tx_dot1_cfg dict |
Field tx_dot1_cfg |
||
tx_tlvs_cfg dict |
Field tx_tlvs_cfg |
||
uuid str |
uuid of the object |
||
oper dict |
Field oper |
||
interface str |
Field interface |
||
state int |
Field state |
||
line_protocol str |
Field line_protocol |
||
link_type str |
Field link_type |
||
mac str |
Field mac |
||
ipv4_addr str |
IP address |
||
ipv4_mask str |
IP subnet mask |
||
ipv4_default_gateway str |
IP gateway address |
||
ipv6_addr str |
Field ipv6_addr |
||
ipv6_prefix str |
Field ipv6_prefix |
||
ipv6_link_local str |
Field ipv6_link_local |
||
ipv6_link_local_prefix str |
Field ipv6_link_local_prefix |
||
ipv6_default_gateway str |
Field ipv6_default_gateway |
||
speed str |
Field speed |
||
duplexity str |
Field duplexity |
||
mtu int |
Field mtu |
||
flow_control int |
Field flow_control |
||
ipv4_acl str |
Field ipv4_acl |
||
ipv6_acl str |
Field ipv6_acl |
||
dhcp_enabled int |
Field dhcp_enabled |
||
stats dict |
Field stats |
||
packets_input str |
Input packets |
||
bytes_input str |
Input bytes |
||
received_broadcasts str |
Received broadcasts |
||
received_multicasts str |
Received multicasts |
||
received_unicasts str |
Received unicasts |
||
input_errors str |
Input errors |
||
crc str |
CRC |
||
frame str |
Frames |
||
input_err_short str |
Runts |
||
input_err_long str |
Giants |
||
packets_output str |
Output packets |
||
bytes_output str |
Output bytes |
||
transmitted_broadcasts str |
Transmitted broadcasts |
||
transmitted_multicasts str |
Transmitted multicasts |
||
transmitted_unicasts str |
Transmitted unicasts |
||
output_errors str |
Output errors |
||
collisions str |
Collisions |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.