a10_router_bgp

Synopsis

Border Gateway Protocol (BGP)

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
as_number int/required			AS number
aggregate_address_list list			Field aggregate_address_list
	aggregate_address str		Configure BGP aggregate entries (Aggregate prefix)
	as_set bool		Generate AS set path information
	summary_only bool		Filter more specific routes from updates
bgp dict			Field bgp
	always_compare_med bool		Allow comparing MED from different neighbors
	bestpath_cfg dict		Field bestpath_cfg
	dampening_cfg dict		Field dampening_cfg
	local_preference_value int		Configure default local preference value
	deterministic_med bool		Pick the best-MED path among paths advertised from the neighboring AS
	enforce_first_as bool		Enforce the first AS for EBGP routes
	fast_external_failover bool		Immediately reset session if a link to a directly connected external peer goes down
	log_neighbor_changes bool		Log neighbor up/down and reset reason
	nexthop_trigger_count int		BGP nexthop-tracking status (count)
	router_id str		Override current router identifier (peers will reset) (Manually configured router identifier)
	override_validation bool		override router-id validation
	scan_time int		Configure background scan interval (Scan interval (sec) [Default=60 Disable=0])
	graceful_restart bool		Configure BGP BGP Graceful Restart
	bgp_restart_time int		BGP Peer Graceful Restart time in seconds (default 90)
	bgp_stalepath_time int		BGP Graceful Restart Stalepath retention time in seconds (default 360)
distance_list list			Field distance_list
	admin_distance int		Define an administrative distance
	src_prefix str		IP source prefix
	acl_str str		Access list name
	ext_routes_dist int		Distance for routes external to the AS
	int_routes_dist int		Distance for routes internal to the AS
	local_routes_dist int		Distance for local routes
maximum_paths_value int			Supported BGP multipath numbers
originate bool			Distribute a default route
timers dict			Field timers
	bgp_keepalive int		Keepalive interval
	bgp_holdtime int		Holdtime
synchronization bool			Perform IGP synchronization
auto_summary bool			Enable automatic network number summarization
uuid str			uuid of the object
user_tag str			Customized tag
network dict			Field network
	synchronization dict		Field synchronization
	ip_cidr_list list		Field ip_cidr_list
neighbor dict			Field neighbor
	peer_group_neighbor_list list		Field peer_group_neighbor_list
	ipv4_neighbor_list list		Field ipv4_neighbor_list
	ipv6_neighbor_list list		Field ipv6_neighbor_list
	ethernet_neighbor_list list		Field ethernet_neighbor_list
	ve_neighbor_list list		Field ve_neighbor_list
	trunk_neighbor_list list		Field trunk_neighbor_list
redistribute dict			Field redistribute
	connected_cfg dict		Field connected_cfg
	floating_ip_cfg dict		Field floating_ip_cfg
	lw4o6_cfg dict		Field lw4o6_cfg
	static_nat_cfg dict		Field static_nat_cfg
	ip_nat_cfg dict		Field ip_nat_cfg
	ip_nat_list_cfg dict		Field ip_nat_list_cfg
	isis_cfg dict		Field isis_cfg
	ospf_cfg dict		Field ospf_cfg
	rip_cfg dict		Field rip_cfg
	static_cfg dict		Field static_cfg
	nat_map_cfg dict		Field nat_map_cfg
	vip dict		Field vip
	uuid str		uuid of the object
address_family dict			Field address_family
	ipv6 dict		Field ipv6

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks 2021