NAT Pool Group

Configure a set of IP pools for use by NAT. Pool groups enable you to use non-contiguous IP address ranges, by combining multiple IP address pools.

The device selects the pool whose addresses are in the same subnet as the next-hop interface used by the data route table to reach the server.

The NAT Pool Group page allows you to perform the following:

• Create
• Edit
• Delete

View a NAT Pool Group List

To view the NAT pool group list, navigate to IP/Domain > Pool Group.

The field description for view, create, and edit are the same. For the field description, see Configure a CGNv6 NAT Pool Group.

Edit a CGNv6 NAT Pool Group

To edit a CGNv6 NAT pool group list:

1. Navigate to IP/Domain > Pool Group.
2. Select an NAT pool group that you want to edit, click the Kebab menu, and click Edit.
3. On the Edit CGNv6 NAT Pool Group page, update the required details and click Update.
   The update confirmation message is displayed.

Delete a CGNv6 NAT Pool Group

To delete a CGNv6 NAT pool group:

1. Navigate to IP/Domain > Pool Group.
2. Select an LSN NAT pool group that you want to delete, click the Kebab menu, and click Delete.
3. On the Confirmation page, click Yes.
   The delete confirmation message is displayed.