Configure a RADIUS Server

You are here:

Configure a RADIUS Server

To configure a Radius server:

Navigate to CGN Technology > LSN (NAT 44) > Radius
Under the RADIUS Server section, click + Add RADIUS Server.
On the Add RADIUS Server page, specify the required details and click Create.
The create confirmation message is displayed.

The configuration options are:

Field	Option	Description
Listen Port		Specify the listen port of the RADIUS server. Specify a value between 1024 and 65535.
Secret		Specify the secret. When selected, the following option is displayed:
Secret	Secret String	The password required by the RADIUS server for authentication requests.
VRID		Select a VRRP-A failover group for the RADIUS server.
IP List		Select an IP list of IPv6 remote clients. Click + Add New Row and enter the following details:
	IP List Name	Select the name of a configured IP list.
	Secret	Specify the password for the IP list selected.
RADIUS Attribute
Inside IP		Specify the Inside IP attributes as follows:
	Vendor	Select a value between 1 and 65535.
	Number	Select a value between 1 and 255.
Inside IPv6 Prefix		Specify the Inside IPv6 attributes as follows:
	Prefix Length	Select the prefix length for the prefix for RADIUS attributes in the logs. Clear all RADIUS entries before changing the prefix length.
	Prefix Vendor	Select a value between 1 and 65535.
	Prefix Number	Select a value between 1 and 255.
Inside IPv6		Specify the Inside IPv6 attributes as follows:
	Vendor	Select a value between 1 and 65535.
	Number	Select a value between 1 and 255.
IMEI		Specify the IMEI (International Mobile Station Equipment Identity) attributes as follows:
	Vendor	Select a value between 1 and 65535.
	Number	Select a value between 1 and 255.
IMSI		Specify the IMSI (International Mobile Subscriber Identity) attributes as follows:
	Vendor	Select a value between 1 and 65535.
	Number	Select a value between 1 and 255.
MSISDN		Specify the MSIDSN (Mobile Station International Subscriber Directory Number) attributes as follows:
	Vendor	Select a value between 1 and 65535.
	Number	Select a value between 1 and 255.
Custom1 Custom2 Custom3 Custom4 Custom5 Custom6		Configure the custom attributes as follows:
	Name	Specify a name for the custom attribute. A string of 1-15 characters is accepted.
	Type	Select one of the following: Hexadecimal String - This is the default option selected.
	Vendor	Select a value between 1 and 65535.
	Number	Select a value between 1 and 255.
Accounting
Event: On		Select any one of the following: Delete Entries Using Attributes Ignore
Attribute		This field is enabled when you select the Event: On field as Delete Entries Using Attributes. For attributes options, see RADIUS Attribute as mentioned above.
Event Start		Select any one of the following: Ignore Append Entry Replace Entry
Event: Interim-Update		Select any one of the following: Ignore Append Entry Replace Entry
Event Stop		Select any one of the following: Ignore Delete Entry Delete Entry And Sessions
Display Reply		Configure the toggle option for RADIUS reply packet.