Manage a Zone Service Protection Profile

You are here:

Manage a Zone Service Protection Profile

Perform the following steps to access the Zone Service Protection Profiles page:

Navigate to Configuration > Zone Policies / Profiles > Zone Service Protection Profiles.
(Optional) Perform any of the following actions:

Table 70 : Action and its purpose for Zone Service Protection Profiles

Table 69 : Zone Service Protection Profile
Actions	Purpose
Reset	Resets the search filter on the profiles.
Refresh	Refreshes the information displayed for the profile page.
Delete	Deletes the configured profile.
Create <Protocol> Zone Service Profile	Configures a new <protocol> zone service profile.

The Zone Service Protection Profile page displays a table of configured Zone Service Protection Profiles along with information about them.

Table 72 : Information About Previously Configured Zone Service Protection Profile

Table 71 : Zone Service Protection Profile Actions

Column Heading

Description

Name

The name of the Zone Service Protection Profile.

Actions

Edit—Allows you to edit previously configured profile.

NOTE:

Changes made to the zone service profile propagates to any zone that is associated with it. If the profile is in use, click one of the following options:

Save—Applies the configuration changes to all the associated zones without sending them to the TPS device(s).
Save & Push—Applies the configuration changes to all the associated zones and sends them to the TPS device.

NOTE:

Select the appropriate check boxes from the dialogue box to overwrite the Indicator Setting of the zone services.

Duplicate—Allows you to duplicate the profile.

For information on configurable parameters, see Configure a Zone Service Protection Profile.