Graph

On the Mitigation Console page, the graph section displays an incident through rates and parameters selectable from the appropriate tab.

Perform the following steps to view the incidents page:

1. Navigate to Incidents > Mitigation Console.

   The following page appears.

   Table 25 : Graph Description of options available in the Graph Section of the Mitigation Console

   Table 24 : Graph

   Link	Description
   Zone	Select an incident from the drop-down menu to display information and a chart.
   Service	Select a service for the selected zone.
   Type	Select one of the following options: DST—Receives the incoming traffic from the destination. SRC—Receives the incoming traffic from the source. NOTE: If source port is selected, Live Indicators, Top Sources, Top Destinations, and Incident Logs tab are not displayed.
   PPS	Click on the PPS tab to view the packets per second in a snapshot.
   BPS	Click on the BPS tab to view the bits per second in a snapshot.
   Countermeasures	Click on the Countermeasures tab to view a snapshot of the traffic data per countermeasure. The section displays information such as packets dropped based on auth, service, GLID, blacklist and source GLID. Select or deselect an indicator to filter specific countermeasure indicators.
   All Devices	Select All Devices to view a snapshot of the traffic data for each TPS device. A window appears that shows traffic as packets per second or bits per second, depending on whether the PPS or BPS tab is selected.
   Live Indicator	The Live Indicators section on Zone Mitigation Console displays information for the traffic on A10 Defend Orchestrator App-managed TPS devices by charting information for various traffic packet rates. To display Live Indicators when Logs or Alerts is displayed, click on Live Indicators. The parameters for Live Indicators are dependent on the protocol. For example, the TCP protocol offers 13 indicators, while the UDP protocol offers 5.
   Time	Select a time duration to view the summary incident chart for 5 mins, 15 mins, 30 mins, 1 hour, 6 hours, 24 hours or All. The default time is 5 mins.
   Refresh button	Click the button to manually refresh.