Device List

You are here:

Device List

In the devices list, you can see TPS detectors and TPS mitigators. TPS devices can be used as mitigators or standalone detectors. These devices are fully owned by A10 Defend Orchestrator App.

The Devices > Device List page displays a list of ACOS devices that are currently being managed by A10 Defend Orchestrator App.

You can either select the device from the search bar or select them by Name, IP address, or Model from the drop-down list.

Table 143 : Device List
Column heading	Description
Status	Indicates the status of the device: (Green, arrow up)—Indicates that both ping and HTTP/HTTPS are running. (Orange, arrow up)—Indicates that only ping is running. (Red, arrow down)—Indicates that neither ping nor HTTP/HTTPS are running.
Name	Displays the hostname of the device.
IP Address	Displays the IPv4 or IPv6 address of the managed device.
Model	Displays the model of the device. A10 Defend Orchestrator App supports the ability to manage the following types of A10 Networks devices: AX Series Thunder Series vThunder (formerly known as SoftAX)
SW Info	Displays the software version and build number on the TPS device. To view the latest version on the TPS device after upgrade, select Scan from Device under the Actions column.
Type	Displays the role of the device. A TPS device can be used either as a mitigator or a detector. To configure the device, go to Devices > Device List page. Select the Save Config on Device under the Actions column.
Device Group	Depending on the device type, displays the name of either Mitigator Group or Detector Group, the device is associated with.

The following options are available under the Actions column:

Table 144 : Options under Actions column

Options

Description

Scan from Device

If the same object does not exist in A10 Defend Orchestrator App, the scan action will fetch protected zones, destination entries, templates, and class lists from the TPS mitigators. In the case of TPS, detectors can automatically discover the IP addresses and services and fetch the discovered entities.

Sync to Device

Sends the following configurations to the selected device when the device is out-of-sync:

Device global settings and management configuration such as sFlow and DDoS notification settings.
Zones and dependent objects such as templates, GLIDs, and class lists.
BGP Routes, flowspecs, and route-maps associated with Zones.
Geo Location Databases.

CAUTION:

It may take some time to synchronize Geo Location databases. If there is a class list on the device with Geo Location, you must remove the entries. Else, an error is displayed while synchronizing the device.

Click Submit.

Save Config on Device

Select a device and click Save Config on Device to save the current configuration on the device.

Refresh

Refreshes the current device list by retrieving the list of devices from database and querying each device for the latest operational statistics on memory usage, CPU usage, and up-time.