a10_snmp_server_enable_traps¶

Synopsis
Parameters
Examples
Status

Synopsis ¶

Enable SNMP traps

Parameters ¶

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
all bool			Enable all SNMP traps
lldp bool			Enable lldp traps
uuid str			uuid of the object
routing dict			Field routing
	bgp dict		Field bgp
	isis dict		Field isis
	ospf dict		Field ospf
gslb dict			Field gslb
	all bool		Enable all GSLB traps
	zone bool		Enable GSLB zone related traps
	site bool		Enable GSLB site related traps
	group bool		Enable GSLB group related traps
	service_ip bool		Enable GSLB service-ip related traps
	uuid str		uuid of the object
slb dict			Field slb
	all bool		Enable all SLB traps
	application_buffer_limit bool		Enable application buffer reach limit trap
	gateway_up bool		Enable SLB server gateway up trap
	gateway_down bool		Enable SLB server gateway down trap
	server_conn_limit bool		Enable SLB server connection limit trap
	server_conn_resume bool		Enable SLB server connection resume trap
	server_up bool		Enable slb server up trap
	server_down bool		Enable SLB server-down trap
	server_disabled bool		Enable SLB server-disabled trap
	server_selection_failure bool		Enable SLB server selection failure trap
	service_conn_limit bool		Enable SLB service connection limit trap
	service_conn_resume bool		Enable SLB service connection resume trap
	service_down bool		Enable SLB service-down trap
	service_up bool		Enable SLB service-up trap
	service_group_up bool		Enable SLB service-group-up trap
	service_group_down bool		Enable SLB service-group-down trap
	service_group_member_up bool		Enable SLB service-group-member-up trap
	service_group_member_down bool		Enable SLB service-group-member-down trap
	vip_connlimit bool		Enable the virtual server reach conn-limit trap
	vip_connratelimit bool		Enable the virtual server reach conn-rate-limit trap
	vip_down bool		Enable SLB virtual server down trap
	vip_port_connlimit bool		Enable the virtual port reach conn-limit trap
	vip_port_connratelimit bool		Enable the virtual port reach conn-rate-limit trap
	vip_port_down bool		Enable SLB virtual port down trap
	vip_port_up bool		Enable SLB virtual port up trap
	vip_up bool		Enable SLB virtual server up trap
	bw_rate_limit_exceed bool		Enable SLB server/port bandwidth rate limit exceed trap
	bw_rate_limit_resume bool		Enable SLB server/port bandwidth rate limit resume trap
	uuid str		uuid of the object
snmp dict			Field snmp
	all bool		Enable all SNMP group traps
	linkdown bool		Enable SNMP link-down trap
	linkup bool		Enable SNMP link-up trap
	uuid str		uuid of the object
vrrp_a dict			Field vrrp_a
	all bool		Enable all VRRP-A group traps
	active bool		Enable VRRP-A active trap
	standby bool		Enable VRRP-A standby trap
	uuid str		uuid of the object
vcs dict			Field vcs
	state_change bool		Enable VCS state change trap
	uuid str		uuid of the object
system dict			Field system
	all bool		Enable all system group traps
	control_cpu_high bool		Enable control CPU usage high trap
	data_cpu_high bool		Enable data CPU usage high trap
	fan bool		Enable system fan trap
	file_sys_read_only bool		Enable file system read-only trap
	high_disk_use bool		Enable system high disk usage trap
	high_memory_use bool		Enable system high memory usage trap
	high_temp bool		Enable system high temperature trap
	low_temp bool		Enable system low temperature trap
	license_management bool		Enable system license management traps
	packet_drop bool		Enable system packet dropped trap
	power bool		Enable system power supply trap
	pri_disk bool		Enable system primary hard disk trap
	restart bool		Enable system restart trap
	sec_disk bool		Enable system secondary hard disk trap
	shutdown bool		Enable system shutdown trap
	smp_resource_event bool		Enable system smp resource event trap
	syslog_severity_one bool		Enable system syslog severity one messages trap
	tacacs_server_up_down bool		Enable system TACACS monitor server up/down trap
	start bool		Enable system start trap
	uuid str		uuid of the object
slb_change dict			Field slb_change
	all bool		Enable all system group traps
	resource_usage_warning bool		Enable partition resource usage warning trap
	connection_resource_event bool		Enable system connection resource event trap
	server bool		Enable slb server create/delete trap
	server_port bool		Enable slb server port create/delete trap
	ssl_cert_change bool		Enable SSL certificate change trap
	ssl_cert_expire bool		Enable SSL certificate expiring trap
	vip bool		Enable slb vip create/delete trap
	vip_port bool		Enable slb vip-port create/delete trap
	system_threshold bool		Enable slb system threshold trap
	uuid str		uuid of the object
lsn dict			Field lsn
	all bool		Enable all LSN group traps
	total_port_usage_threshold bool		Enable LSN trap when NAT total port usage reaches the threshold (default 655350000)
	per_ip_port_usage_threshold bool		Enable LSN trap when IP total port usage reaches the threshold (default 64512)
	max_port_threshold int		Maximum threshold
	max_ipport_threshold int		Maximum threshold
	fixed_nat_port_mapping_file_change bool		Enable LSN trap when fixed nat port mapping file change
	traffic_exceeded bool		Enable LSN trap when NAT pool reaches the threshold
	uuid str		uuid of the object
network dict			Field network
	trunk_port_threshold bool		Enable network trunk-port-threshold trap
	uuid str		uuid of the object
ssl dict			Field ssl
	server_certificate_error bool		Enable SSL server certificate error trap
	uuid str		uuid of the object

Examples ¶

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.

Authors¶

A10 Networks 2021