a10_slb_template_tcp_proxy¶

Synopsis
Parameters
Examples
Status

Synopsis ¶

TCP Proxy

Parameters ¶

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
name str/required			TCP Proxy Template Name
ack_aggressiveness str			‘low’= Delayed ACK; ‘medium’= Delayed ACK, with ACK on each packet with PUSH flag; ‘high’= ACK on each packet;
backend_wscale int			The TCP window scale used for the server side, default is off (number)
dynamic_buffer_allocation bool			Optimally adjust the transmit and receive buffer sizes of TCP proxy while keeping their sum constant
fin_timeout int			FIN timeout (sec), default is disabled (number)
force_delete_timeout int			The maximum time that a session can stay in the system before being deleted, default is off (number (second))
force_delete_timeout_100ms int			The maximum time that a session can stay in the system before being deleted, default is off (number in 100ms)
alive_if_active bool			keep connection alive if active traffic
idle_timeout int			Idle Timeout (Interval of 60 seconds), default is 600 (idle timeout in second, default 600)
server_down_action str			‘FIN’= FIN Connection; ‘RST’= Reset Connection;
half_open_idle_timeout int			TCP Half Open Idle Timeout (sec), default is off (number)
half_close_idle_timeout int			TCP Half Close Idle Timeout (sec), default is off (cmd is deprecated, use fin- timeout instead) (number)
init_cwnd int			The initial congestion control window size (packets), default is 10 (init-cwnd in packets, default 10)
initial_window_size int			Set the initial window size, default is off (number)
keepalive_interval int			Interval between keepalive probes (sec), default is off (number (seconds))
keepalive_probes int			Number of keepalive probes sent, default is off
mss int			Responding MSS to use if client MSS is large, default is off (number)
psh_flag_optimization bool			Enable Optimized PSH Flag Use
nagle bool			Enable Nagle Algorithm
qos int			QOS level (number)
receive_buffer int			TCP Receive Buffer (default 200k) (number default 200000 bytes)
reno bool			Enable Reno Congestion Control Algorithm
transmit_buffer int			TCP Transmit Buffer (default 200k) (number default 200000 bytes)
reset_fwd bool			send reset to server if error happens
reset_rev bool			send reset to client if error happens
disable bool			send reset to client when server is disabled
down bool			send reset to client when server is down
del_session_on_server_down bool			Delete session if the server/port goes down (either disabled/hm down)
retransmit_retries int			Number of Retries for Retransmit, default is 5
insert_client_ip bool			Insert client ip into TCP option
syn_retries int			SYN Retry Numbers, default is 5
timewait int			Timewait Threshold (sec), default 5 (number)
disable_tcp_timestamps bool			disable TCP Timestamps Option
disable_window_scale bool			disable TCP Window-Scale Option
disable_sack bool			disable Selective Ack Option
invalid_rate_limit int			Invalid Packet Response Rate Limit (ms), default is 500 (number default 500 challenges)
disable_abc bool			Appropriate Byte Counting RFC 3465 Disabled, default is enabled (Appropriate Byte Counting (ABC) is enabled by default)
reassembly_timeout int			The reassembly timeout, default is 30sec (number)
reassembly_limit int			The reassembly queuing limit, default is 25 segments (number)
min_rto int			The minmum retransmission timeout, default is 200ms (number)
limited_slowstart int			RFC 3742 Limited Slow-Start for TCP with Large Congestion Windows (number)
early_retransmit bool			Configure the Early-Retransmit Algorithm (RFC 5827) (Early-Retransmit is disabled by default)
maxburst int			The max packet count sent per transmission event (number)
proxy_header dict			Field proxy_header
	proxy_header_action str		‘insert’= Insert proxy header;
	version str		‘v1’= version 1; ‘v2’= version 2;
uuid str			uuid of the object
user_tag str			Customized tag

Examples ¶

- name: Create TCP proxy template
  a10.acos_axapi.a10_slb_template_tcp_proxy:
    name: my_tcp_proxy_template
    ack_aggressiveness: low
    idle_timeout: 500

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.

Authors¶

A10 Networks 2021