a10_router_ospf_area¶
Parameters¶
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
ospf_process_id str/required |
Key to identify parent object |
||
area_ipv4 str/required |
OSPF area ID in IP address format |
||
area_num int/required |
OSPF area ID as a decimal value |
||
auth_cfg dict |
Field auth_cfg |
||
authentication bool |
Enable authentication |
||
message_digest bool |
Use message-digest authentication |
||
filter_lists list |
Field filter_lists |
||
filter_list bool |
Filter networks between OSPF areas |
||
acl_name str |
Filter networks by access-list (Name of an access-list) |
||
acl_direction str |
‘in’= Filter networks sent to this area; ‘out’= Filter networks sent from this area; |
||
plist_name str |
Filter networks by prefix-list (Name of an IP prefix-list) |
||
plist_direction str |
‘in’= Filter networks sent to this area; ‘out’= Filter networks sent from this area; |
||
nssa_cfg dict |
Field nssa_cfg |
||
nssa bool |
Specify a NSSA area |
||
no_redistribution bool |
No redistribution into this NSSA area |
||
no_summary bool |
Do not send summary LSA into NSSA |
||
translator_role str |
‘always’= Translate always; ‘candidate’= Candidate for translator (default); ‘never’= Do not translate; |
||
default_information_originate bool |
Originate Type 7 default into NSSA area |
||
metric int |
OSPF default metric (OSPF metric) |
||
metric_type int |
OSPF metric type (OSPF metric type for default routes) |
||
default_cost int |
Set the summary-default cost of a NSSA or stub area (Stub’s advertised default summary cost) |
||
range_list list |
Field range_list |
||
area_range_prefix str |
Area range for IPv4 prefix |
||
option str |
‘advertise’= Advertise this range (default); ‘not-advertise’= DoNotAdvertise this range; |
||
shortcut str |
‘default’= Set default shortcutting behavior; ‘disable’= Disable shortcutting through the area; ‘enable’= Enable shortcutting through the area; |
||
stub_cfg dict |
Field stub_cfg |
||
stub bool |
Configure OSPF area as stub |
||
no_summary bool |
Do not inject inter-area routes into area |
||
virtual_link_list list |
Field virtual_link_list |
||
virtual_link_ip_addr str |
ID (IP addr) associated with virtual link neighbor |
||
bfd bool |
Bidirectional Forwarding Detection (BFD) |
||
hello_interval int |
Hello packet interval (Seconds) |
||
dead_interval int |
Dead router detection time (Seconds) |
||
retransmit_interval int |
LSA retransmit interval (Seconds) |
||
transmit_delay int |
LSA transmission delay (Seconds) |
||
virtual_link_authentication bool |
Enable authentication |
||
virtual_link_auth_type str |
‘message-digest’= Use message-digest authentication; ‘null’= Use null authentication; |
||
authentication_key str |
Set authentication key (Authentication key (8 chars)) |
||
message_digest_key int |
Set message digest key (Key ID) |
||
md5 str |
Use MD5 algorithm (Authentication key (16 chars)) |
||
uuid str |
uuid of the object |
||