a10_gslb_site

Synopsis

Specify a GSLB site

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
site_name str/required			Specify GSLB site name
auto_map bool			Enable DNS Auto Mapping
disable bool			Disable all servers in the GSLB site
weight int			Specify a weight for the GSLB site (Weight, default is 1)
multiple_geo_locations list			Field multiple_geo_locations
	geo_location str		Specify the geographic location of the GSLB site (Specify geo-location for this site)
template str			Specify template to collect site information (Specify GSLB SNMP template name)
bw_cost bool			Specify cost of band-width
limit int			Specify the limit for bandwidth, default is unlimited
threshold int			Specify the threshold for limit
proto_aging_time int			Specify GSLB Protocol aging time
proto_aging_fast bool			Fast GSLB Protocol aging
controller str			Specify the local controller for the GSLB site (Specify the hostname of the local controller)
uuid str			uuid of the object
user_tag str			Customized tag
ip_server_list list			Field ip_server_list
	ip_server_name str		Specify the real server name
	uuid str		uuid of the object
active_rdt dict			Field active_rdt
	aging_time int		Aging Time, Unit= min, default is 10
	smooth_factor int		Factor of Smooth RDT, default is 10
	range_factor int		Factor of RDT Range, default is 25 (Range Factor of Smooth RDT)
	limit int		Limit of valid RDT, default is 16383 (Limit, unit= millisecond)
	mask str		Client IP subnet mask, default is 32
	ipv6_mask int		Client IPv6 subnet mask, default is 128
	ignore_count int		Ignore count if RDT is out of range, default is 5
	bind_geoloc bool		Bind RDT to geo-location
	overlap bool		Enable overlap for geo-location to do longest match
	uuid str		uuid of the object
easy_rdt dict			Field easy_rdt
	aging_time int		Aging Time, Unit= min, default is 10
	smooth_factor int		Factor of Smooth RDT, default is 10
	range_factor int		Factor of RDT Range, default is 25 (Range Factor of Smooth RDT)
	limit int		Limit of valid RDT, default is 16383 (Limit, unit= millisecond)
	mask str		Client IP subnet mask, default is 32
	ipv6_mask int		Client IPv6 subnet mask, default is 128
	ignore_count int		Ignore count if RDT is out of range, default is 5
	bind_geoloc bool		Bind RDT to geo-location
	overlap bool		Enable overlap for geo-location to do longest match
	uuid str		uuid of the object
slb_dev_list list			Field slb_dev_list
	device_name str		Specify SLB device name
	ip_address str		IP address
	ipv6_address str		IPv6 address
	domain str		Device hostname
	dev_resolve_as str		‘resolve-to-ipv4’= Use A Query only to resolve FQDN (Default Query type); ‘resolve-to-ipv6’= Use AAAA Query only to resolve FQDN; ‘resolve-to-ipv4-and- ipv6’= Use A as well as AAAA Query to resolve FQDN;
	admin_preference int		Specify administrative preference (Specify admin-preference value,default is 100)
	session_number int		Field session_number
	session_utilization int		Field session_utilization
	rdt_type str		‘rdt’= rdt; ‘site-rdt’= site-rdt;
	client_ip str		Specify client IP address
	rdt_value int		Specify Round-delay-time
	probe_timer int		Field probe_timer
	auto_detect str		‘ip’= Service IP only; ‘port’= Service Port only; ‘ip-and-port’= Both service IP and service port; ‘disabled’= disable auto-detect;
	auto_map bool		Enable DNS Auto Mapping
	max_client int		Specify maximum number of clients, default is 32768
	proto_aging_time int		Specify GSLB Protocol aging time, default is 60
	proto_aging_fast bool		Fast GSLB Protocol aging
	health_check_action str		‘health-check’= Enable health Check; ‘health-check-disable’= Disable health check;
	gateway_ip_addr str		IP address
	proto_compatible bool		Run GSLB Protocol in compatible mode
	msg_format_acos_2x bool		Run GSLB Protocol in compatible mode with a ACOS 2.x GSLB peer
	uuid str		uuid of the object
	user_tag str		Customized tag
	vip_server dict		Field vip_server
oper dict			Field oper
	bw_cost int		Field bw_cost
	gslb_site str		Field gslb_site
	template_name str		Field template_name
	curr_count int		Field curr_count
	highest_count int		Field highest_count
	unlimited int		Field unlimited
	limit int		Field limit
	unusable int		Field unusable
	ntype str		Field type
	len int		Field len
	value int		Field value
	time int		Field time
	state str		Field state
	total_vip_curr_conn int		Field total_vip_curr_conn
	type_last list		Field type_last
	client_ldns_list list		Field client_ldns_list
	site_name str		Specify GSLB site name
	ip_server_list list		Field ip_server_list
	slb_dev_list list		Field slb_dev_list
stats dict			Field stats
	hits str		Number of times the site was selected
	site_name str		Specify GSLB site name
	ip_server_list list		Field ip_server_list

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks