a10_fw_gtp
Synopsis
Configure GTP
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
gtp_value str |
‘enable’= Enable GTP Inspection; |
||
network_element_list_v4 str |
Class List (Class List Name) |
||
ne_v4_log_periodicity int |
Periodic Logging Frequency(In Minutes) |
||
network_element_list_v6 str |
Class List (Class List Name) |
||
ne_v6_log_periodicity int |
Periodic Logging Frequency(In Minutes) |
||
apn_prefix_list str |
Class List (Class List Name) |
||
apn_log_periodicity int |
Periodic Logging Frequency(In Minutes) |
||
echo_timeout int |
echo message timeout (minutes) (echo-timeout (default 120)) |
||
path_mgmt_logging str |
‘enable-log’= Enable Log for Path Management; |
||
insertion_mode str |
‘monitor’= Enable inline view-only mode; ‘skip-state-checks’= Enable skip stateful checks mode; |
||
uuid str |
uuid of the object |
||
sampling_enable list |
Field sampling_enable |
||
counters1 str |
‘all’= all; ‘out-of-session-memory’= Out of Tunnel Memory for GTP-C; ‘no-fwd- route’= No Forward Route for GTP-C; ‘no-rev-route’= No Reverse Route for GTP-C; ‘blade-out-of-session-memory’= Out of Tunnel Memory on PU2; ‘blade-no-fwd- route’= No Forward Route on PU2; ‘blade-no-rev-route’= No Reverse Route on PU2; ‘gtp-smp-created’= GTP SMP Created; ‘gtp-smp-marked-deleted’= GTP SMP Marked Deleted; ‘gtp-smp-deleted’= GTP SMP Deleted; ‘smp-creation-failed’= GTP SMP Helper Session Creation Failed; ‘gtp-smp-path-created’= GTP SMP PATH Created; ‘gtp-smp-path-freed’= GTP SMP PATH MEM freed; ‘gtp-smp-path-allocated’= GTP SMP PATH MEM allocated; ‘gtp-smp-path-creation-failed’= GTP SMP PATH creation Failed; ‘gtp-smp-path-check-failed’= GTP SMP PATH check Failed; ‘gtp-smp-c- check-failed’= GTP-C SMP check Failed; ‘blade-gtp-smp-created’= GTP SMP Created on PU2; ‘blade-gtp-smp-marked-deleted’= GTP SMP Marked Deleted on PU2; ‘blade- gtp-smp-deleted’= GTP SMP Deleted on PU2; ‘blade-smp-creation-failed’= GTP SMP Helper Session Creation Failed on PU2; ‘blade-gtp-smp-path-created’= GTP SMP PATH Created on PU2; ‘blade-gtp-smp-path-freed’= GTP SMP PATH MEM freed on PU2; ‘blade-gtp-smp-path-allocated’= GTP SMP PATH MEM allocated on PU2; ‘blade-gtp- smp-path-creation-failed’= GTP SMP PATH creation Failed on PU2; ‘blade-gtp-smp- path-check-failed’= GTP SMP PATH check Failed on PU2; ‘blade-gtp-smp-c-check- failed’= GTP-C SMP check Failed on PU2; ‘gtp-smp-session-count-check-failed’= GTP-U session count is not in range of 0-11 in GTP-C SMP; ‘gtp-c-ref-count-smp- exceeded’= GTP-C session count on C-smp exceeded 2; ‘blade-gtp-c-ref-count-smp- exceeded’= GTP-C session count on C-smp exceeded 2 on PU2; ‘gtp-u-smp-in-rml- with-sess’= GTP-U smp is linked when C-smp is in rml; ‘blade-gtp-u-smp-in-rml- with-sess’= GTP-U smp is linked when C-smp is in rml on PU2; ‘gtp-u-pkt-fwd- conn-create’= GTP-U pkt fwded while creating conn with gtp toggling; ‘gtp-c- pkt-fwd-conn-create’= GTP-C pkt fwded while creating conn with gtp toggling; ‘gtp-echo-pkt-fwd-conn-create’= GTP-ECHO pkt fwded while creating conn with gtp toggling; ‘gtp-tunnel-rate-limit-entry-create-success’= GTP Tunnel Level Rate Limit Entry Create Success; ‘gtp-tunnel-rate-limit-entry-create-failure’= GTP Tunnel Level Rate Limit Entry Create Failure; ‘gtp-tunnel-rate-limit-entry- deleted’= GTP Tunnel Level Rate Limit Entry Deleted; ‘gtp-u-tunnel-rate-limit- entry-create-success’= GTP-U Tunnel Level Rate Limit Entry Create Success; ‘gtp-u-tunnel-rate-limit-entry-create-failure’= GTP-U Tunnel Level Rate Limit Entry Create Failure; ‘gtp-u-tunnel-rate-limit-entry-deleted’= GTP-U Tunnel Level Rate Limit Entry Deleted; ‘gtp-rate-limit-smp-created’= GTP Rate Limit SMP Created; ‘gtp-rate-limit-smp-freed’= GTP Rate Limit SMP Freed; ‘gtp-rate- limit-smp-create-failure’= GTP Rate Limit SMP Create Failure; ‘gtp-rate- limit-t3-ctr-create-failure’= GTP Rate Limit Dynamic Counters Create Failure; ‘gtp-rate-limit-entry-create-failure’= GTP Rate Limit Entry Create Failure; ‘blade-gtp-rate-limit-smp-created’= GTP Rate Limit SMP Created on PU2; ‘blade- gtp-rate-limit-smp-freed’= GTP Rate Limit SMP Freed on PU2; ‘blade-gtp-rate- limit-smp-create-failure’= GTP Rate Limit SMP Create Failure on PU2; ‘blade- gtp-rate-limit-t3-ctr-create-failure’= GTP Rate Limit Dynamic Counters Create Failure on PU2; ‘blade-gtp-rate-limit-entry-create-failure’= GTP Rate Limit Entry Create Failure on PU2; ‘gtp-echo-conn-created’= GTP Echo Request Conn Created; ‘gtp-echo-conn-deleted’= GTP Echo Request conn Deleted; ‘gtp-node- restart-echo’= GTP Node Restoration due to Recovery IE in Echo; ‘gtp-c-echo- path-failure’= GTP-C Path Failure due to Echo; ‘drop-vld-gtp-echo-out-of- state-’= GTP Echo Out of State Drop; ‘drop-vld-gtp-echo-ie-len-exceed-msg-len’= GTP Echo IE Length Exceeds Message Length; ‘drop-vld-gtp-u-echo-out-of-state-’= GTP-U Echo Out of State Drop; ‘gtp-create-session-request-retransmit’= GTP-C Retransmitted Create Session Request; ‘gtp-add-bearer-request-retransmit’= GTP-C Retransmitted Add Bearer Request; ‘gtp-delete-session-request- retransmit’= GTP-C Retransmitted Delete Session Request; ‘gtp-handover-request- retransmit’= GTP Handover Request Retransmit; ‘gtp-del-bearer-request- retransmit’= GTP-C Retransmitted Delete Bearer Request; ‘gtp-add-bearer- response-retransmit’= GTP-C Retransmitted Add Bearer Response; ‘gtp-create- session-request-retx-drop’= GTP-C Retransmitted Create Session Request dropped; ‘gtp-u-out-of-state-drop’= GTP-U Out of state Drop; ‘gtp-c-handover-request- out-of-state-drop’= GTP-C Handover Request Out of state Drop; ‘gtp-v1-c-nsapi- not-found-in-delete-req’= GTPv1-C NSAPI Not Found in GTP Request; ‘gtp-v2-c-bearer-not-found-in-delete-req’= GTPv2-C Bearer Not Found in GTP Request; ‘gtp-v2-c-bearer-not-found-in-delete-resp’= GTPv2-C Bearer Not Found in GTP Response; ‘gtp-multiple-handover-request’= GTP Multiple Handover Request; ‘gtp-rr-message-drop’= GTP Message Dropped in RR Mode; ‘gtp-u-rr- message-drop’= GTP-U Message Dropped in RR Mode; ‘gtp-rr-echo-message-dcmsg’= GTP Echo Message Sent to home CPU in RR Mode; ‘gtp-rr-c-message-dcmsg’= GTP-C Message Sent to home CPU in RR Mode; ‘drop-gtp-frag-or-jumbo-pkt’= GTP Fragmented or JUMBO packet Drop; ‘response-with-reject-cause-forwarded’= GTP-C Response with Reject Cause Forwarded; ‘gtp-c-message-forwarded-without-conn’= GTP-C Message Forwarded without Conn; ‘gtp-v0-c-ver-not-supp’= GTPv0-C Version not supported indication; ‘gtp-v1-c-ver-not-supp’= GTPv1-C Version not supported indication; ‘gtp-v2-c-ver-not-supp’= GTPv2-C Version not supported indication; ‘gtp-v1-extn-hdt-notif’= GTPV1 Supported Extension header notification; ‘gtp-u-error-ind’= GTP-U Error Indication; ‘gtp-c-handover-in- progress-with-conn’= GTP-C mesg matching conn with HO In Progress; ‘gtp-ho-in- progress-handover-request’= GTP-C ho mesg matching conn with HO In Progress; ‘gtp-correct-conn-ho-in-progress-handover-request’= GTP-C ho mesg matching correct conn(reuse teid) with HO In Progress; ‘gtp-wrong-conn-ho-in-progress- handover-request’= GTP-C ho mesg matching wrong conn(new teid) with HO In Progress; ‘gtp-ho-in-progress-handover-response’= GTP-C ho response matching a conn with HO In Progress; ‘gtp-ho-in-progress-c-mesg’= GTP-C other than ho mesg matching conn with HO In Progress; ‘gtp-unset-ho-flag-reuse-teid’= GTP-C SGW reuse teid with ho and unset ho flag; ‘gtp-refresh-c-conn-reuse-teid’= GTP-C SGW reuse teid with ho and refresh old conn; ‘gtp-rematch-smp-matching-conn’= GTP-C rematch smp with packet matching conn; ‘gtp-wrong-conn-handover-request’= GTP-C ho mesg matching wrong conn(new teid) with no HO flag; ‘gtp-refresh-conn- set-ho-flag-latest’= GTP-C SGW refresh old conn and set ho flag on latest smp; ‘gtp-c-process-pkt-drop’= GTP-C process pkt drop; ‘gtp-c-fwd-pkt-drop’= GTP-C fwd pkt drop; ‘gtp-c-rev-pkt-drop’= GTP-C rev pkt drop; ‘gtp-c-fwd-v1-other’= GTP-C fwd v1 other messages; ‘gtp-c-fwd-v2-other’= GTP-C fwd v2 other messages; ‘gtp-c-rev-v1-other’= GTP-C rev v1 other messages; ‘gtp-c-rev-v2-other’= GTP-C rev v2 other messages; ‘gtp-c-going-thru-fw-lookup’= GTP-C mesg going thru fw lookup can be resp or l5 mesg not matching smp; ‘gtp-c-conn-create-pkt-drop’= GTP-C conn creation drop; ‘gtp-c-pkt-fwd-conn-create-no-fteid’= GTP-C pkt fwded while creating conn when no FTEID; ‘gtp-inter-pu-mstr-to-bld-dcmsg-fail’= GTP inter-PU dcmsg failed from Master to Blade; ‘gtp-inter-pu-mstr-to-bld-dcmsg- sent’= GTP inter-PU Master to Blade dcmsg sent; ‘gtp-inter-pu-mstr-to-bld- dcmsg-recv’= GTP inter-PU dcmsg received on blade; ‘gtp-inter-pu-mstr-to-bld- query-sent’= GTP inter-PU query sent from Master to Blade; |
||
counters2 str |
‘gtp-inter-pu-mstr-to-bld-query-recv’= GTP inter-PU GTP-C mesg received on Blade; ‘gtp-inter-pu-mstr-to-bld-query-resp-sent’= GTP inter-PU GTP-C query response sent from Master to Blade; ‘gtp-inter-pu-bld-to-mstr-dcmsg-fail’= GTP inter-PU dcmsg failed from Blade to Master; ‘gtp-inter-pu-bld-to-mstr-dcmsg- sent’= GTP inter-PU Blade to Master dcmsg sent; ‘gtp-inter-pu-bld-to-mstr- dcmsg-recv’= GTP inter-PU dcmsg received on Master; ‘gtp-inter-pu-bld-to-mstr- query-sent’= GTP inter-PU query sent from Blade to Master; ‘gtp-inter-pu-bld- to-mstr-query-recv’= GTP inter-PU GTP-C mesg received on Master; ‘gtp-inter-pu- bld-to-mstr-query-resp-sent’= GTP inter-PU GTP-C query response sent from Blade to Master; ‘gtp-mstr-to-bld-query-resp-fail’= GTP inter-PU dcmsg of query response failed from Master to Blade; ‘gtp-bld-to-mstr-query-resp-fail’= GTP inter-PU dcmsg of query response failed from Blade to Master; ‘gtp-c-smp-refer- stale-idx’= GTP-C SMP referring stale C-conn idx; ‘gtp-smp-dec-sess-count- check-failed’= GTP-U session count is 0 in GTP-C SMP; ‘gtp-c-freed-conn-check’= GTP-C freed conn accessed; ‘gtp-c-conn-not-in-rml-when-freed’= GTP-C conn not in rml when tuple is freed; ‘gtp-u-smp-check-failed’= GTP U-SMP check Failed; ‘gtp-c-smp-already-in-rml’= GTP-C smp already in rml; ‘gtp-u-smp-already-in- rml’= GTP-U smp already in rml; ‘gtp-info-ext-not-found’= GTP-Info ext not found while freeing C-smp; ‘gtp-c-smp-unlink-from-hash-fail’= GTP-C smp unlink from hash table failed; ‘gtp-u-smp-unlink-from-hash-fail’= GTP-U smp unlink from hash table failed; ‘gtp-smp-link-to-hash-in-rml’= GTP smp linked to hash table when in rml; ‘gtp-c-conn-ptr-not-found’= GTP-C conn ptr not found; ‘gtp- smp-already-in-del-queue’= GTP SMP already in del queue, cannot be added again; ‘gtp-smp-path-already-in-del-queue’= GTP SMP-PATH already in del queue, cannot be added again; ‘blade-gtp-c-smp-refer-stale-idx’= GTP-C SMP referring stale C-conn idx on PU2; ‘blade-gtp-smp-dec-sess-count-check-failed’= GTP-U session count is 0 in GTP-C SMP on PU2; ‘blade-gtp-c-freed-conn-check’= GTP-C freed conn accessed on PU2; ‘blade-gtp-c-conn-not-in-rml-when-freed’= GTP-C conn not in rml when tuple is freed on PU2; ‘blade-gtp-u-smp-check-failed’= GTP U-SMP check Failed on PU2; ‘blade-gtp-c-smp-already-in-rml’= GTP-C smp already in rml on PU2; ‘blade-gtp-u-smp-already-in-rml’= GTP-U smp already in rml on PU2; ‘blade-gtp-info-ext-not-found’= GTP-Info ext not found while freeing C-smp on PU2; ‘blade-gtp-c-smp-unlink-from-hash-fail’= GTP-C smp unlink from hash table failed on PU2; ‘blade-gtp-u-smp-unlink-from-hash-fail’= GTP-U smp unlink from hash table failed on PU2; ‘blade-gtp-smp-link-to-hash-in-rml’= GTP smp linked to hash table when in rml on PU2; ‘blade-gtp-c-conn-ptr-not-found’= GTP-C conn ptr not found on PU2; ‘blade-gtp-smp-already-in-del-queue’= GTP SMP already in del queue, cannot be added again on PU2; ‘blade-gtp-smp-path-already-in-del- queue’= GTP SMP-PATH already in del queue, cannot be added again on PU2; ‘gtp- smp-double-free’= GTP SMP added twice to del queue; ‘gtp-smp-path-double-free’= GTP SMP path added twice to del queue, cannot be added again; ‘gtp-c-smp-not- found-in-hash’= GTP-C SMP not found in hash table to unlink; ‘gtp-u-smp-not- found-in-hash’= GTP-U SMP not found in hash table to unlink; ‘gtp-smp-already- in-UL-hash’= GTP SMP already linked in uplink hash; ‘gtp-smp-already-in-DL- hash’= GTP SMP already linked in downlink hash; ‘gtp-c-smp-in-rml-c-conn-age- upd’= GTP-C SMP in RML during C-conn age update; ‘gtp-c-ref-count-max-smp-set- for-ageout’= GTP-C SMP set for deletion during age out with refcount max; ‘gtp- c-smp-del-max-ref-count’= GTP-C SMP with del flag and max ref count during ageout; ‘gtp-u-smp-unlinked-u-conn-creation’= GTP-U smp unlinked from HT while creating U-conn; ‘blade-gtp-smp-double-free’= GTP SMP added twice to del queue on PU2; ‘blade-gtp-smp-path-double-free’= GTP SMP path added twice to del queue on PU2, cannot be added again; ‘blade-gtp-c-smp-not-found-in-hash’= GTP-C SMP not found in hash table to unlink on PU2; ‘blade-gtp-u-smp-not-found-in-hash’= GTP-U SMP not found in hash table to unlink on PU2; ‘blade-gtp-smp-already-in- UL-hash’= GTP SMP already linked in uplink hash on PU2; ‘blade-gtp-smp-already- in-DL-hash’= GTP SMP already linked in downlink hash on PU2; ‘blade-gtp-c-smp- in-rml-c-conn-age-upd’= GTP-C SMP in RML during C-conn age update on PU2; ‘blade-gtp-c-ref-count-max-smp-set-for-ageout’= GTP-C SMP set for deletion during age out with refcount max on PU2; ‘blade-gtp-c-smp-del-max-ref-count’= GTP-C SMP with del flag and max ref count during ageout on PU2; ‘blade-gtp-u- smp-unlinked-u-conn-creation’= GTP-U smp unlinked from HT while creating U-conn on PU2; ‘gtp-u-stateless-forward’= GTP-U Stateless Forward; ‘gtp-u-smp-not- found-conn-creation’= GTP-U smp not found during conn creation; ‘gtp-u-match-c- smp-with-del-flag’= GTP-U match C-smp with deletion flag; ‘gtp-u-match-c-smp- with-ho-flag’= GTP-U match C-smp with HO flag; ‘gtp-u-match-dbr-u-smp-conn- create’= GTP-U match U-smp with dbr during conn creation; ‘gtp-c-info-extract- failed’= unable to extract GTP-C extension during pkt processing; ‘gtp-c-smp- extract-failed’= unable to extract GTP-C smp during pkt processing; ‘gtp-u- info-extract-failed’= unable to extract GTP-U extension during pkt processing; ‘gtp-u-match-c-smp-in-rml’= GTP-U match C-smp in rml; ‘blade-gtp-c-info- extract-failed’= unable to extract GTP-C extension during pkt processing on PU2; ‘blade-gtp-c-smp-extract-failed’= unable to extract GTP-C smp during pkt processing on PU2; ‘blade-gtp-u-info-extract-failed’= unable to extract GTP-U extension during pkt processing on PU2; ‘blade-gtp-u-match-c-smp-in-rml’= GTP-U match C-smp in rml on PU2; ‘gtp-echo-stateless-forward’= GTP-echo Stateless Forward; ‘gtp-u-smp-not-found-c-processing’= unable to extract GTP-U smp not found in C-processing; ‘gtp-u-pkt-u-smp-validation-failed’= gtp-u smp ip validation failed; ‘blade-gtp-u-pkt-u-smp-validation-failed’= gtp-u smp ip validation failed on PU2; ‘gtp-u-frag-pkt-processed’= GTP-U Fragmented packet processed; ‘gtp-c-frag-pkt-received’= GTP-C Fragmented packet received; ‘gtp-u- frag-pkt-received’= GTP-U Fragmented packet received; ‘gtp-u-attempt-for- double-free’= GTP-U smp double free attempted; ‘gtp-c-attempt-for-double-free’= GTP-C smp double free attempted; ‘gtp-c-smp-access-after-reuse’= GTP-C smp access after reuse; ‘gtp-u-smp-access-after-reuse’= GTP-U smp access after reuse; ‘gtp-c-smp-cleared-by-standalone’= GTP-C smp cleared by standalone conn; ‘gtp-c-smp-cleared-by-l3-with-l5’= GTP-C smp cleared by l3-conn with l5; ‘blade-gtp-u-attempt-for-double-free’= GTP-U smp double free attempted on PU2; ‘blade-gtp-c-attempt-for-double-free’= GTP-C smp double free attempted on PU2; ‘blade-gtp-c-smp-access-after-reuse’= GTP-C smp access after reuse on PU2; ‘blade-gtp-u-smp-access-after-reuse’= GTP-U smp access after reuse on PU2; ‘blade-gtp-c-smp-cleared-by-standalone’= GTP-C smp cleared by standalone conn on PU2; ‘blade-gtp-c-smp-cleared-by-l3-with-l5’= GTP-C smp cleared by l3-conn with l5 on PU2; ‘blade-gtp-smp-session-count-check-failed’= GTP-U session count is not in range of 0-11 in GTP-C SMP on PU2; ‘gtp-smp-no-action-with-u-create’= GTP-C SMP no action with u-create at inter-pu sync; ‘blade-gtp-smp-no-action- with-u-create’= GTP-C SMP no action with u-create at inter-pu sync on PU2; ‘gtp-info-ext-not-packed’= GTP-C info not packed; ‘gtp-sync-new-conn-create’= GTP-C sync new conn create; ‘gtp-smp-not-found-inter-pu’= GTP smp not found during inter-pu comm; ‘blade-gtp-smp-not-found-inter-pu’= GTP smp not found during inter-pu comm on PU2; |
||
counters3 str |
‘gtp-inter-pu-u-create-sent’= GTP inter-pu U-creation sync sent; ‘gtp-inter-pu- u-delete-sent’= GTP inter-pu U-deletion sync sent; ‘gtp-inter-pu-c-query-sent’= GTP inter-pu C-query sync sent; ‘blade-gtp-inter-pu-u-create-sent’= GTP inter- pu U-creation sync sent on PU2; ‘blade-gtp-inter-pu-u-delete-sent’= GTP inter- pu U-deletion sync sent on PU2; ‘blade-gtp-inter-pu-c-query-sent’= GTP inter-pu C-query sync sent on PU2; ‘gtp-inter-pu-u-create-tx-fail’= GTP inter-pu U-creation tx fail; ‘gtp-inter-pu-u-delete-tx-fail’= GTP inter-pu U-deletion tx fail; ‘gtp-inter-pu-c-query-tx-fail’= GTP inter-pu C-query tx fail; ‘blade-gtp- inter-pu-u-create-tx-fail’= GTP inter-pu U-creation tx fail on PU2; ‘blade-gtp- inter-pu-u-delete-tx-fail’= GTP inter-pu U-deletion tx fail on PU2; ‘blade-gtp- inter-pu-c-query-tx-fail’= GTP inter-pu C-query tx fail on PU2; ‘gtp-inter-pu- u-create-recv’= GTP inter-pu U-creation recv; ‘gtp-inter-pu-u-delete-recv’= GTP inter-pu U-deletion recv; ‘gtp-inter-pu-c-query-recv’= GTP inter-pu C-mesg recv; ‘blade-gtp-inter-pu-u-create-recv’= GTP inter-pu U-creation recv on PU2; ‘blade-gtp-inter-pu-u-delete-recv’= GTP inter-pu U-deletion recv on PU2; ‘blade-gtp-inter-pu-c-query-recv’= GTP inter-pu C-mesg recv on PU2; ‘gtp-inter- pu-u-create-drop-no-smp’= GTP inter-pu U-create rx drop no smp; ‘blade-gtp- inter-pu-u-create-drop-no-smp’= GTP inter-pu U-create rx drop no smp PU2; ‘gtp- inter-pu-u-delete-drop-no-smp’= GTP inter-pu U-delete rx drop no smp; ‘blade- gtp-inter-pu-u-delete-drop-no-smp’= GTP inter-pu U-delete rx drop no smp PU2; ‘gtp-inter-pu-u-create-error’= GTP inter-pu U-create rx drop with error; ‘blade-gtp-inter-pu-u-create-error’= GTP inter-pu U-create rx drop with error PU2; ‘gtp-inter-pu-u-delete-error’= GTP inter-pu U-delete rx drop with error; ‘blade-gtp-inter-pu-u-delete-error’= GTP inter-pu U-delete rx drop with error PU2; ‘gtp-inter-pu-no-rsp-to-query’= GTP inter-pu No response to query; ‘blade- gtp-inter-pu-no-rsp-to-query’= GTP inter-pu No response to query on PU2; ‘gtp- fwd-tuple-dst-updated’= GTP FWD tuple updated with dst; ‘gtp-rev-tuple-dst- updated’= GTP REV tuple updated with dst; ‘gtp-c-conn-with-no-dst’= GTP-C created on active with no dst; ‘gtp-sync-rx-create-ext-bit-counter-inter-pu’= Conn Sync Create with Ext Received with inter-pu comm counter; ‘gtp-query-pkt- tx-counter-gtp-c’= Conn Query GTP-C sent counter; ‘gtp-query-pkt-tx-counter- gtp-u’= Conn Query GTP-U sent counter; ‘gtp-query-pkt-tx-counter-gtp-echo’= Conn Query GTP-ECHO sent counter; ‘gtp-sync-tx-inter-pu-no-vnp-error’= send of inter-pu msg failed with no vnp error; ‘gtp-sync-tx-inter-pu-no-gtp-u-ext’= send of inter-pu msg failed with no GTP-U ext; ‘gtp-sync-tx-inter-pu-no-ug- error’= send of inter-pu msg failed with no user group error; ‘gtp-sync-tx- inter-pu-no-msg-hdr-error’= send of inter-pu msg failed as msg header ext failed; ‘gtp-sync-tx-inter-pu-no-data-error’= send of inter-pu msg failed with no data to pack; ‘gtp-sync-tx-fw-drop-session-create’= Conn Sync FW gtp Create Session Sent dropped; ‘gtp-query-pkt-rx-counter-gtp-c’= Conn Query GTP-C recv counter; ‘gtp-query-pkt-rx-counter-gtp-u’= Conn Query GTP-U recv counter; ‘gtp- query-pkt-rx-counter-gtp-echo’= Conn Query GTP-ECHO recv counter; ‘gtp-sync-rx- del-c-counter’= Conn Sync Del Session GTP-C Received counter; ‘gtp-sync-rx-del- u-counter’= Conn Sync Del Session GTP-U Received counter; ‘gtp-sync-rx-del- echo-counter’= Conn Sync Del Session ECHO Received counter; ‘gtp-sync-rx- create-c-counter’= Conn Sync create Session GTP-C Received counter; ‘gtp-sync- rx-create-u-counter’= Conn Sync create Session GTP-U Received counter; ‘gtp- sync-rx-create-echo-counter’= Conn Sync create Session ECHO Received counter; ‘gtp-sync-tx-create-c-counter’= Conn Sync create Session GTP-C sent counter; ‘gtp-sync-tx-create-u-counter’= Conn Sync create Session GTP-U sent counter; ‘gtp-sync-tx-create-echo-counter’= Conn Sync create Session ECHO sent counter; ‘gtp-sync-tx-delete-c-counter’= Conn Sync delete Session GTP-C sent counter; ‘gtp-sync-tx-delete-u-counter’= Conn Sync delete Session GTP-U sent counter; ‘gtp-sync-tx-delete-echo-counter’= Conn Sync delete Session ECHO sent counter; ‘gtp-sync-rx-del-no-such-c-session’= Conn Sync Del C-Conn not Found; ‘gtp-sync- rx-del-no-such-u-session’= Conn Sync Del U-Conn not Found; ‘gtp-sync-rx-del-no- such-echo-session’= Conn Sync Del ECHO-Conn not Found; ‘gtp-c-match-c-smp-with- del-flag’= GTP-C match C-smp with deletion flag; ‘gtp-c-match-c-smp-with-ho- flag’= GTP-C match C-smp with HO flag; ‘gtp-c-smp-sig-check-failed’= GTP-C SMP signature check Failed; ‘blade-gtp-c-smp-sig-check-failed’= GTP-C SMP signature check Failed on PU2; ‘gtp-u-smp-sig-check-failed’= GTP SMP signature check Failed; ‘blade-gtp-u-smp-sig-check-failed’= GTP-U SMP signature check Failed on PU2; ‘gtp-smp-sig-check-failed’= GTP SMP signature check Failed; ‘blade-gtp- smp-sig-check-failed’= GTP SMP signature check Failed on PU2; ‘gtp-c-fail-conn- create-slow’= GTP-C packet failed creating L4-session in slowpath; ‘gtp-u-fail- conn-create-slow’= GTP-U packet failed while creating L4-session in slowpath; ‘gtp-pathm-fail-conn-create-slow’= GTP path packet failed while creating L4-session in slowpath; ‘gtp-v0-c-uplink-ingress-packets’= GTPv0-C Uplink Ingress Packets; ‘gtp-v0-c-uplink-egress-packets’= GTPv0-C Uplink Egress Packets; ‘gtp-v0-c-downlink-ingress-packets’= GTPv0-C Downlink Ingress Packets; ‘gtp-v0-c-downlink-egress-packets’= GTPv0-C Downlink Egress Packets; ‘gtp-v0-c-uplink-ingress-bytes’= GTPv0-C Uplink Ingress Bytes; ‘gtp-v0-c-uplink-egress-bytes’= GTPv0-C Uplink Egress Bytes; ‘gtp-v0-c-downlink-ingress-bytes’= GTPv0-C Downlink Ingress Bytes; ‘gtp-v0-c-downlink-egress-bytes’= GTPv0-C Downlink Egress Bytes; ‘gtp-v1-c-uplink-ingress-packets’= GTPv1-C Uplink Ingress Packets; ‘gtp-v1-c-uplink-egress-packets’= GTPv1-C Uplink Egress Packets; ‘gtp-v1-c-downlink-ingress-packets’= GTPv1-C Downlink Ingress Packets; ‘gtp-v1-c-downlink-egress-packets’= GTPv1-C Downlink Egress Packets; ‘gtp-v1-c-uplink-ingress-bytes’= GTPv1-C Uplink Ingress Bytes; ‘gtp-v1-c-uplink-egress-bytes’= GTPv1-C Uplink Egress Bytes; ‘gtp-v1-c-downlink-ingress-bytes’= GTPv1-C Downlink Ingress Bytes; ‘gtp-v1-c-downlink-egress-bytes’= GTPv1-C Downlink Egress Bytes; ‘gtp-v2-c-uplink-ingress-packets’= GTPv2-C Uplink Ingress Packets; ‘gtp-v2-c-uplink-egress-packets’= GTPv2-C Uplink Egress Packets; ‘gtp-v2-c-downlink-ingress-packets’= GTPv2-C Downlink Ingress Packets; ‘gtp-v2-c-downlink-egress-packets’= GTPv2-C Downlink Egress Packets; ‘gtp-v2-c-uplink-ingress-bytes’= GTPv2-C Uplink Ingress Bytes; ‘gtp-v2-c-uplink-egress-bytes’= GTPv2-C Uplink Egress Bytes; ‘gtp-v2-c-downlink-ingress-bytes’= GTPv2-C Downlink Ingress Bytes; ‘gtp-v2-c-downlink-egress-bytes’= GTPv2-C Downlink Egress Bytes; ‘gtp-u-uplink- ingress-packets’= GTP-U Uplink Ingress Packets; ‘gtp-u-uplink-egress-packets’= GTP-U Uplink Egress Packets; ‘gtp-u-downlink-ingress-packets’= GTP-U Downlink Ingress Packets; ‘gtp-u-downlink-egress-packets’= GTP-U Downlink Egress Packets; ‘gtp-u-uplink-ingress-bytes’= GTP-U Uplink Ingress Bytes; ‘gtp-u- uplink-egress-bytes’= GTP-U Uplink Egress Bytes; ‘gtp-u-downlink-ingress- bytes’= GTP-U Downlink Ingress Bytes; ‘gtp-u-downlink-egress-bytes’= GTP-U Downlink Egress Bytes; ‘gtp-v0-c-create-synced’= GTPv0-C Tunnel Create Synced; ‘gtp-v1-c-create-synced’= GTPv1-C Tunnel Create Synced; ‘gtp-v2-c-create- synced’= GTPv2-C Tunnel Create Synced; ‘gtp-v0-c-delete-synced’= GTPv0-C Tunnel Delete Synced; ‘gtp-v1-c-delete-synced’= GTPv1-C Tunnel Delete Synced; ‘gtp-v2-c-delete-synced’= GTPv2-C Tunnel Delete Synced; |
||
counters4 str |
‘gtp-v0-c-create-sync-rx’= GTPv0-C Tunnel Create Sync Received on Standby; ‘gtp-v1-c-create-sync-rx’= GTPv1-C Tunnel Create Sync Received on Standby; ‘gtp-v2-c-create-sync-rx’= GTPv2-C Tunnel Create Sync Received on Standby; ‘gtp-v0-c-delete-sync-rx’= GTPv0-C Tunnel Delete Sync Received on Standby; ‘gtp-v1-c-delete-sync-rx’= GTPv1-C Tunnel Delete Sync Received on Standby; ‘gtp-v2-c-delete-sync-rx’= GTPv2-C Tunnel Delete Sync Received on Standby; ‘gtp-handover-synced’= GTP Handover Synced; ‘gtp-handover-sync-rx’= GTP Handover Sync Received on Standby; ‘gtp-smp-add-bearer-synced’= GTP SMP Add Bearer Synced; ‘gtp-smp-del-bearer-synced’= GTP SMP Del Bearer Synced; ‘gtp- smp-additional-bearer-synced’= GTP SMP Additional Bearer Synced; ‘gtp-smp-add- bearer-sync-rx’= GTP SMP Add Bearer Sync Received on Standby; ‘gtp-smp-del- bearer-sync-rx’= GTP SMP Del Bearer Sync Received on Standby; ‘gtp-smp- additional-bearer-sync-rx’= GTP SMP Additional Bearer Sync Received on Standby; ‘gtp-add-bearer-sync-not-rx-on-standby’= GTP Add Bearer Sync Not Received on Standby; ‘gtp-add-bearer-sync-with-periodic-update-on-standby’= GTP Bearer Added on Standby with Periodic Sync; ‘gtp-delete-bearer-sync-with-periodic- update-on-standby’= GTP Bearer Deleted on Standy with Periodic Sync; ‘gtp-v0-c-echo-create-synced’= GTPv0-C Echo Create Synced; ‘gtp-v1-c-echo- create-synced’= GTPv1-C Echo Create Synced; ‘gtp-v2-c-echo-create-synced’= GTPv2-C Echo Create Synced; ‘gtp-v0-c-echo-create-sync-rx’= GTPv0-C-Echo Create Sync Received on Standby; ‘gtp-v1-c-echo-create-sync-rx’= GTPv1-C-Echo Create Sync Received on Standby; ‘gtp-v2-c-echo-create-sync-rx’= GTPv2-C-Echo Create Sync Received on Standby; ‘gtp-v0-c-echo-del-synced’= GTPv0-C Echo Delete Synced; ‘gtp-v1-c-echo-del-synced’= GTPv1-C Echo Delete Synced; ‘gtp-v2-c-echo- del-synced’= GTPv2-C Echo Delete Synced; ‘gtp-v0-c-echo-del-sync-rx’= GTPv0-C-Echo Delete Sync Received on Standby; ‘gtp-v1-c-echo-del-sync-rx’= GTPv1-C-Echo Delete Sync Received on Standby; ‘gtp-v2-c-echo-del-sync-rx’= GTPv2-C-Echo Delete Sync Received on Standby; ‘drop-gtp-conn-creation-standby’= GTP Conn creation on Standby Drop; ‘gtp-u-synced-before-control’= GTP-U Tunnel synced before corresponding GTP-C; ‘gtp-c-l5-synced-before-l3’= GTP-C L5 conn synced before corresponding L3 GTP-C conn; ‘gtp-smp-path-del-synced’= GTP SMP path delete Synced; ‘gtp-smp-path-del-sync-rx’= GTP SMP path delete Sync Received on Standby; ‘gtp-not-enabled-on-standby’= GTP Not Enabled on Standby; ‘gtp-ip-version-v4-v6’= GTP IP versions of V4&V6 in FTEID; ‘drop-gtp-ip- version-mismatch-fteid’= GTP IP version mismatch for req & response FTEIDs; ‘drop-gtp-ip-version-mismatch-ho-fteid’= GTP IP version mismatch in Handover SGW FTEID; ‘gtp-u-message-length-mismatch’= GTP-U Message Length Mismatch Across Layers; ‘gtp-path-message-length-mismatch’= GTP-Path Message Length Mismatch Across Layers; ‘drop-gtp-missing-cond-ie-bearer-ctx’= Missing conditional IE in bearer context Drop; ‘drop-gtp-bearer-not-found-in-resp’= GTP Bearer not found in response; ‘gtp-stateless-forward’= GTP Stateless Forward; ‘gtp-l3-conn-deleted’= GTP L3 conn deleted; ‘gtp-l5-conn-created’= GTP L5 conn created; ‘gtp-monitor-forward’= GTP messages forwarded via monitor mode; ‘gtp- u-monitor-forward’= GTP-U messages forwarded via monitor mode; ‘gtp-u_inner-ip- not-present’= GTP-U inner IP not present; ‘gtp-ext_hdr-incorrect-length’= GTP Extension header incorrect length; |
||
apn_prefix dict |
Field apn_prefix |
||
uuid str |
uuid of the object |
||
network_element dict |
Field network_element |
||
uuid str |
uuid of the object |
||
stats dict |
Field stats |
||
out_of_session_memory str |
Out of Tunnel Memory for GTP-C |
||
no_fwd_route str |
No Forward Route for GTP-C |
||
no_rev_route str |
No Reverse Route for GTP-C |
||
blade_out_of_session_memory str |
Out of Tunnel Memory on PU2 |
||
blade_no_fwd_route str |
No Forward Route on PU2 |
||
blade_no_rev_route str |
No Reverse Route on PU2 |
||
gtp_smp_path_check_failed str |
GTP SMP PATH check Failed |
||
gtp_smp_c_check_failed str |
GTP-C SMP check Failed |
||
blade_gtp_smp_path_check_failed str |
GTP SMP PATH check Failed on PU2 |
||
blade_gtp_smp_c_check_failed str |
GTP-C SMP check Failed on PU2 |
||
gtp_tunnel_rate_limit_entry_create_failure str |
GTP Tunnel Level Rate Limit Entry Create Failure |
||
gtp_u_tunnel_rate_limit_entry_create_failure str |
GTP-U Tunnel Level Rate Limit Entry Create Failure |
||
gtp_rate_limit_smp_create_failure str |
GTP Rate Limit SMP Create Failure |
||
gtp_rate_limit_t3_ctr_create_failure str |
GTP Rate Limit Dynamic Counters Create Failure |
||
gtp_rate_limit_entry_create_failure str |
GTP Rate Limit Entry Create Failure |
||
blade_gtp_rate_limit_smp_create_failure str |
GTP Rate Limit SMP Create Failure on PU2 |
||
blade_gtp_rate_limit_t3_ctr_create_failure str |
GTP Rate Limit Dynamic Counters Create Failure on PU2 |
||
blade_gtp_rate_limit_entry_create_failure str |
GTP Rate Limit Entry Create Failure on PU2 |
||
gtp_node_restart_echo str |
GTP Node Restoration due to Recovery IE in Echo |
||
gtp_c_echo_path_failure str |
GTP-C Path Failure due to Echo |
||
drop_vld_gtp_echo_out_of_state_ str |
GTP Echo Out of State Drop |
||
drop_vld_gtp_echo_ie_len_exceed_msg_len str |
GTP Echo IE Length Exceeds Message Length |
||
drop_vld_gtp_u_echo_out_of_state_ str |
GTP-U Echo Out of State Drop |
||
gtp_create_session_request_retx_drop str |
GTP-C Retransmitted Create Session Request dropped |
||
gtp_u_out_of_state_drop str |
GTP-U Out of state Drop |
||
gtp_c_handover_request_out_of_state_drop str |
GTP-C Handover Request Out of state Drop |
||
gtp_v1_c_nsapi_not_found_in_delete_req str |
GTPv1-C NSAPI Not Found in GTP Request |
||
gtp_v2_c_bearer_not_found_in_delete_req str |
GTPv2-C Bearer Not Found in GTP Request |
||
gtp_v2_c_bearer_not_found_in_delete_resp str |
GTPv2-C Bearer Not Found in GTP Response |
||
gtp_rr_message_drop str |
GTP Message Dropped in RR Mode |
||
gtp_u_rr_message_drop str |
GTP-U Message Dropped in RR Mode |
||
drop_gtp_frag_or_jumbo_pkt str |
GTP Fragmented or JUMBO packet Drop |
||
gtp_v0_c_ver_not_supp str |
GTPv0-C Version not supported indication |
||
gtp_v1_c_ver_not_supp str |
GTPv1-C Version not supported indication |
||
gtp_v2_c_ver_not_supp str |
GTPv2-C Version not supported indication |
||
gtp_c_handover_in_progress_with_conn str |
GTP-C mesg matching conn with HO In Progress |
||
gtp_c_conn_create_pkt_drop str |
GTP-C conn creation drop |
||
gtp_smp_dec_sess_count_check_failed str |
GTP-U session count is 0 in GTP-C SMP |
||
gtp_u_smp_check_failed str |
GTP U-SMP check Failed |
||
gtp_info_ext_not_found str |
GTP-Info ext not found while freeing C-smp |
||
blade_gtp_smp_dec_sess_count_check_failed str |
GTP-U session count is 0 in GTP-C SMP on PU2 |
||
blade_gtp_u_smp_check_failed str |
GTP U-SMP check Failed on PU2 |
||
blade_gtp_info_ext_not_found str |
GTP-Info ext not found while freeing C-smp on PU2 |
||
gtp_u_stateless_forward str |
GTP-U Stateless Forward |
||
gtp_echo_stateless_forward str |
GTP-echo Stateless Forward |
||
gtp_u_frag_pkt_processed str |
GTP-U Fragmented packet processed |
||
gtp_c_frag_pkt_received str |
GTP-C Fragmented packet received |
||
gtp_u_frag_pkt_received str |
GTP-U Fragmented packet received |
||
blade_gtp_smp_session_count_check_failed str |
GTP-U session count is not in range of 0-11 in GTP-C SMP on PU2 |
||
gtp_sync_tx_fw_drop_session_create str |
Conn Sync FW gtp Create Session Sent dropped |
||
gtp_c_smp_sig_check_failed str |
GTP-C SMP signature check Failed |
||
blade_gtp_c_smp_sig_check_failed str |
GTP-C SMP signature check Failed on PU2 |
||
gtp_u_smp_sig_check_failed str |
GTP SMP signature check Failed |
||
blade_gtp_u_smp_sig_check_failed str |
GTP-U SMP signature check Failed on PU2 |
||
gtp_smp_sig_check_failed str |
GTP SMP signature check Failed |
||
blade_gtp_smp_sig_check_failed str |
GTP SMP signature check Failed on PU2 |
||
gtp_c_fail_conn_create_slow str |
GTP-C packet failed creating L4-session in slowpath |
||
gtp_u_fail_conn_create_slow str |
GTP-U packet failed while creating L4-session in slowpath |
||
gtp_pathm_fail_conn_create_slow str |
GTP path packet failed while creating L4-session in slowpath |
||
gtp_v0_c_uplink_ingress_packets str |
GTPv0-C Uplink Ingress Packets |
||
gtp_v0_c_uplink_egress_packets str |
GTPv0-C Uplink Egress Packets |
||
gtp_v0_c_downlink_ingress_packets str |
GTPv0-C Downlink Ingress Packets |
||
gtp_v0_c_downlink_egress_packets str |
GTPv0-C Downlink Egress Packets |
||
gtp_v0_c_uplink_ingress_bytes str |
GTPv0-C Uplink Ingress Bytes |
||
gtp_v0_c_uplink_egress_bytes str |
GTPv0-C Uplink Egress Bytes |
||
gtp_v0_c_downlink_ingress_bytes str |
GTPv0-C Downlink Ingress Bytes |
||
gtp_v0_c_downlink_egress_bytes str |
GTPv0-C Downlink Egress Bytes |
||
gtp_v1_c_uplink_ingress_packets str |
GTPv1-C Uplink Ingress Packets |
||
gtp_v1_c_uplink_egress_packets str |
GTPv1-C Uplink Egress Packets |
||
gtp_v1_c_downlink_ingress_packets str |
GTPv1-C Downlink Ingress Packets |
||
gtp_v1_c_downlink_egress_packets str |
GTPv1-C Downlink Egress Packets |
||
gtp_v1_c_uplink_ingress_bytes str |
GTPv1-C Uplink Ingress Bytes |
||
gtp_v1_c_uplink_egress_bytes str |
GTPv1-C Uplink Egress Bytes |
||
gtp_v1_c_downlink_ingress_bytes str |
GTPv1-C Downlink Ingress Bytes |
||
gtp_v1_c_downlink_egress_bytes str |
GTPv1-C Downlink Egress Bytes |
||
gtp_v2_c_uplink_ingress_packets str |
GTPv2-C Uplink Ingress Packets |
||
gtp_v2_c_uplink_egress_packets str |
GTPv2-C Uplink Egress Packets |
||
gtp_v2_c_downlink_ingress_packets str |
GTPv2-C Downlink Ingress Packets |
||
gtp_v2_c_downlink_egress_packets str |
GTPv2-C Downlink Egress Packets |
||
gtp_v2_c_uplink_ingress_bytes str |
GTPv2-C Uplink Ingress Bytes |
||
gtp_v2_c_uplink_egress_bytes str |
GTPv2-C Uplink Egress Bytes |
||
gtp_v2_c_downlink_ingress_bytes str |
GTPv2-C Downlink Ingress Bytes |
||
gtp_v2_c_downlink_egress_bytes str |
GTPv2-C Downlink Egress Bytes |
||
gtp_u_uplink_ingress_packets str |
GTP-U Uplink Ingress Packets |
||
gtp_u_uplink_egress_packets str |
GTP-U Uplink Egress Packets |
||
gtp_u_downlink_ingress_packets str |
GTP-U Downlink Ingress Packets |
||
gtp_u_downlink_egress_packets str |
GTP-U Downlink Egress Packets |
||
gtp_u_uplink_ingress_bytes str |
GTP-U Uplink Ingress Bytes |
||
gtp_u_uplink_egress_bytes str |
GTP-U Uplink Egress Bytes |
||
gtp_u_downlink_ingress_bytes str |
GTP-U Downlink Ingress Bytes |
||
gtp_u_downlink_egress_bytes str |
GTP-U Downlink Egress Bytes |
||
gtp_u_message_length_mismatch str |
GTP-U Message Length Mismatch Across Layers |
||
gtp_path_message_length_mismatch str |
GTP-Path Message Length Mismatch Across Layers |
||
drop_gtp_missing_cond_ie_bearer_ctx str |
Missing conditional IE in bearer context Drop |
||
drop_gtp_bearer_not_found_in_resp str |
GTP Bearer not found in response |
||
gtp_stateless_forward str |
GTP Stateless Forward |
||
gtp_monitor_forward str |
GTP messages forwarded via monitor mode |
||
gtp_u_monitor_forward str |
GTP-U messages forwarded via monitor mode |
||
gtp_ext_hdr_incorrect_length str |
GTP Extension header incorrect length |
||
apn_prefix dict |
Field apn_prefix |
||
network_element dict |
Field network_element |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.