a10_visibility_packet_capture_global_templates_template_trigger_sys_obj_stats_change_fw_gtp
Synopsis
Configure triggers for fw.gtp object
Parameters
Parameters |
Choices/Defaults |
Comment |
|
---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
template_name str/required |
Key to identify parent object |
||
uuid str |
uuid of the object |
||
trigger_stats_inc dict |
Field trigger_stats_inc |
||
out_of_session_memory bool |
Enable automatic packet-capture for Out of Tunnel Memory for GTP-C |
||
blade_out_of_session_memory bool |
Enable automatic packet-capture for Out of Tunnel Memory on PU2 |
||
gtp_smp_path_check_failed bool |
Enable automatic packet-capture for GTP SMP PATH check Failed |
||
gtp_smp_c_check_failed bool |
Enable automatic packet-capture for GTP-C SMP check Failed |
||
blade_gtp_smp_path_check_failed bool |
Enable automatic packet-capture for GTP SMP PATH check Failed on PU2 |
||
blade_gtp_smp_c_check_failed bool |
Enable automatic packet-capture for GTP-C SMP check Failed on PU2 |
||
gtp_tunnel_rate_limit_entry_create_fail bool |
Enable automatic packet-capture for GTP Tunnel Level Rate Limit Entry Create Failure |
||
gtp_u_tunnel_rate_limit_entry_create_fa bool |
Enable automatic packet-capture for GTP-U Tunnel Level Rate Limit Entry Create Failure |
||
gtp_rate_limit_smp_create_failure bool |
Enable automatic packet-capture for GTP Rate Limit SMP Create Failure |
||
gtp_rate_limit_t3_ctr_create_failure bool |
Enable automatic packet-capture for GTP Rate Limit Dynamic Counters Create Failure |
||
gtp_rate_limit_entry_create_failure bool |
Enable automatic packet-capture for GTP Rate Limit Entry Create Failure |
||
blade_gtp_rate_limit_smp_create_failure bool |
Enable automatic packet-capture for GTP Rate Limit SMP Create Failure on PU2 |
||
blade_gtp_rate_limit_t3_ctr_create_fail bool |
Enable automatic packet-capture for GTP Rate Limit Dynamic Counters Create Failure on PU2 |
||
blade_gtp_rate_limit_entry_create_failu bool |
Enable automatic packet-capture for GTP Rate Limit Entry Create Failure on PU2 |
||
gtp_smp_dec_sess_count_check_failed bool |
Enable automatic packet-capture for GTP-U session count is 0 in GTP-C SMP |
||
gtp_u_smp_check_failed bool |
Enable automatic packet-capture for GTP U-SMP check Failed |
||
gtp_info_ext_not_found bool |
Enable automatic packet-capture for GTP-Info ext not found while freeing C-smp |
||
blade_gtp_smp_dec_sess_count_check_fail bool |
Enable automatic packet-capture for GTP-U session count is 0 in GTP-C SMP on PU2 |
||
blade_gtp_u_smp_check_failed bool |
Enable automatic packet-capture for GTP U-SMP check Failed on PU2 |
||
blade_gtp_info_ext_not_found bool |
Enable automatic packet-capture for GTP-Info ext not found while freeing C-smp on PU2 |
||
blade_gtp_smp_session_count_check_faile bool |
Enable automatic packet-capture for GTP-U session count is not in range of 0-11 in GTP-C SMP on PU2 |
||
gtp_c_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP-C SMP signature check Failed |
||
blade_gtp_c_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP-C SMP signature check Failed on PU2 |
||
gtp_u_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP SMP signature check Failed |
||
blade_gtp_u_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP-U SMP signature check Failed on PU2 |
||
gtp_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP SMP signature check Failed |
||
blade_gtp_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP SMP signature check Failed on PU2 |
||
uuid str |
uuid of the object |
||
trigger_stats_rate dict |
Field trigger_stats_rate |
||
threshold_exceeded_by int |
Set the threshold to the number of times greater than the previous duration to start the capture, default is 5 |
||
duration int |
Time in seconds to look for the anomaly, default is 60 |
||
out_of_session_memory bool |
Enable automatic packet-capture for Out of Tunnel Memory for GTP-C |
||
blade_out_of_session_memory bool |
Enable automatic packet-capture for Out of Tunnel Memory on PU2 |
||
gtp_smp_path_check_failed bool |
Enable automatic packet-capture for GTP SMP PATH check Failed |
||
gtp_smp_c_check_failed bool |
Enable automatic packet-capture for GTP-C SMP check Failed |
||
blade_gtp_smp_path_check_failed bool |
Enable automatic packet-capture for GTP SMP PATH check Failed on PU2 |
||
blade_gtp_smp_c_check_failed bool |
Enable automatic packet-capture for GTP-C SMP check Failed on PU2 |
||
gtp_tunnel_rate_limit_entry_create_fail bool |
Enable automatic packet-capture for GTP Tunnel Level Rate Limit Entry Create Failure |
||
gtp_u_tunnel_rate_limit_entry_create_fa bool |
Enable automatic packet-capture for GTP-U Tunnel Level Rate Limit Entry Create Failure |
||
gtp_rate_limit_smp_create_failure bool |
Enable automatic packet-capture for GTP Rate Limit SMP Create Failure |
||
gtp_rate_limit_t3_ctr_create_failure bool |
Enable automatic packet-capture for GTP Rate Limit Dynamic Counters Create Failure |
||
gtp_rate_limit_entry_create_failure bool |
Enable automatic packet-capture for GTP Rate Limit Entry Create Failure |
||
blade_gtp_rate_limit_smp_create_failure bool |
Enable automatic packet-capture for GTP Rate Limit SMP Create Failure on PU2 |
||
blade_gtp_rate_limit_t3_ctr_create_fail bool |
Enable automatic packet-capture for GTP Rate Limit Dynamic Counters Create Failure on PU2 |
||
blade_gtp_rate_limit_entry_create_failu bool |
Enable automatic packet-capture for GTP Rate Limit Entry Create Failure on PU2 |
||
gtp_smp_dec_sess_count_check_failed bool |
Enable automatic packet-capture for GTP-U session count is 0 in GTP-C SMP |
||
gtp_u_smp_check_failed bool |
Enable automatic packet-capture for GTP U-SMP check Failed |
||
gtp_info_ext_not_found bool |
Enable automatic packet-capture for GTP-Info ext not found while freeing C-smp |
||
blade_gtp_smp_dec_sess_count_check_fail bool |
Enable automatic packet-capture for GTP-U session count is 0 in GTP-C SMP on PU2 |
||
blade_gtp_u_smp_check_failed bool |
Enable automatic packet-capture for GTP U-SMP check Failed on PU2 |
||
blade_gtp_info_ext_not_found bool |
Enable automatic packet-capture for GTP-Info ext not found while freeing C-smp on PU2 |
||
blade_gtp_smp_session_count_check_faile bool |
Enable automatic packet-capture for GTP-U session count is not in range of 0-11 in GTP-C SMP on PU2 |
||
gtp_c_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP-C SMP signature check Failed |
||
blade_gtp_c_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP-C SMP signature check Failed on PU2 |
||
gtp_u_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP SMP signature check Failed |
||
blade_gtp_u_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP-U SMP signature check Failed on PU2 |
||
gtp_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP SMP signature check Failed |
||
blade_gtp_smp_sig_check_failed bool |
Enable automatic packet-capture for GTP SMP signature check Failed on PU2 |
||
uuid str |
uuid of the object |
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.