a10_access_list_extended

Synopsis 

Configure Extended Access List

Parameters 

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
extd int/required			IP extended access list
rules list			Field rules
	extd_seq_num int		Sequence number
	extd_remark str		Access list entry comment (Notes for this ACL)
	extd_action str		‘deny’= Deny; ‘permit’= Permit; ‘l3-vlan-fwd-disable’= Disable L3 forwarding between VLANs;
	icmp bool		Internet Control Message Protocol
	tcp bool		protocol TCP
	udp bool		protocol UDP
	ip bool		Any Internet Protocol
	service_obj_group str		Service object group (Source object group name)
	icmp_type int		ICMP type number
	any_type bool		Any ICMP type
	special_type str		‘echo-reply’= Type 0, echo reply; ‘echo-request’= Type 8, echo request; ‘info- reply’= Type 16, information reply; ‘info-request’= Type 15, information request; ‘mask-reply’= Type 18, address mask reply; ‘mask-request’= Type 17, address mask request; ‘parameter-problem’= Type 12, parameter problem; ‘redirect’= Type 5, redirect message; ‘source-quench’= Type 4, source quench; ‘time-exceeded’= Type 11, time exceeded; ‘timestamp’= Type 13, timestamp; ‘timestamp-reply’= Type 14, timestamp reply; ‘dest-unreachable’= Type 3, destination unreachable;
	any_code bool		Any ICMP code
	icmp_code int		ICMP code number
	special_code str		‘frag-required’= Code 4, fragmentation required; ‘host-unreachable’= Code 1, destination host unreachable; ‘network-unreachable’= Code 0, destination network unreachable; ‘port-unreachable’= Code 3, destination port unreachable; ‘proto-unreachable’= Code 2, destination protocol unreachable; ‘route-failed’= Code 5, source route failed;
	src_any bool		Any source host
	src_host str		A single source host (Host address)
	src_subnet str		Source Address
	src_mask str		Source Mask 0=apply 255=ignore
	src_object_group str		Network object group (Source network object group name)
	src_eq int		Match only packets on a given source port (port number)
	src_gt int		Match only packets with a greater port number
	src_lt int		Match only packets with a lower port number
	src_range int		match only packets in the range of port numbers (Starting Port Number)
	src_port_end int		Ending Port Number
	dst_any bool		Any destination host
	dst_host str		A single destination host (Host address)
	dst_subnet str		Destination Address
	dst_mask str		Destination Mask 0=apply 255=ignore
	dst_object_group str		Destination network object group name
	dst_eq int		Match only packets on a given destination port (port number)
	dst_gt int		Match only packets with a greater port number
	dst_lt int		Match only packets with a lesser port number
	dst_range int		Match only packets in the range of port numbers (Starting Destination Port Number)
	dst_port_end int		Edning Destination Port Number
	fragments bool		IP fragments
	vlan int		VLAN ID
	ethernet str		Ethernet interface (Port number)
	trunk str		Ethernet trunk (trunk number)
	dscp int		DSCP
	established bool		TCP established
	acl_log bool		Log matches against this entry
	transparent_session_only bool		Only log transparent sessions
uuid str			uuid of the object

Examples 

Return Values 

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’]): The AXAPI endpoint being accessed.
http_method (, str, [‘POST’, ‘GET’]): HTTP method being used by the primary task to interact with the AXAPI endpoint.
request_body (, complex, ): Params used to query the AXAPI
response_body (, complex, ): Response from the AXAPI

Status 

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.

Authors

A10 Networks