a10_interface_tunnel
Synopsis
Tunnel interface
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
ifnum int/required |
Tunnel interface number |
||
name str |
Name for the interface |
||
mtu int |
Interface mtu (Interface MTU, default 1 (min MTU is 1280 for IPv6)) |
||
action str |
‘enable’= Enable; ‘disable’= Disable; |
||
speed int |
Speed in Gbit/Sec (Default 10 Gbps) |
||
load_interval int |
Configure Load Interval (Seconds (5-300, Multiple of 5), default 300) |
||
security_level int |
Configure security level for interface. 100 - Most Secure |
||
uuid str |
uuid of the object |
||
user_tag str |
Customized tag |
||
sampling_enable list |
Field sampling_enable |
||
counters1 str |
‘all’= all; ‘num-rx-pkts’= received packets; ‘num-total-rx-bytes’= received bytes; ‘num-tx-pkts’= sent packets; ‘num-total-tx-bytes’= sent bytes; ‘num-rx- err-pkts’= received error packets; ‘num-tx-err-pkts’= sent error packets; ‘rate_pkt_sent’= Packet sent rate packets/sec; ‘rate_byte_sent’= Byte sent rate bits/sec; ‘rate_pkt_rcvd’= Packet received rate packets/sec; ‘rate_byte_rcvd’= Byte received rate bits/sec; |
||
packet_capture_template str |
Name of the packet capture template to be bind with this object |
||
ip dict |
Field ip |
||
address dict |
Field address |
||
generate_membership_query bool |
Enable Membership Query |
||
generate_membership_query_val int |
1 - 255 (Default is 125) |
||
max_resp_time int |
Max Response Time (Default is 100) |
||
inside bool |
Configure interface as inside |
||
outside bool |
Configure interface as outside |
||
uuid str |
uuid of the object |
||
rip dict |
Field rip |
||
ospf dict |
Field ospf |
||
ipv6 dict |
Field ipv6 |
||
address_cfg list |
Field address_cfg |
||
ipv6_enable bool |
Enable IPv6 processing |
||
inside bool |
Configure interface as inside |
||
outside bool |
Configure interface as outside |
||
uuid str |
uuid of the object |
||
router dict |
Field router |
||
ospf dict |
Field ospf |
||
map dict |
Field map |
||
inside bool |
Configure MAP inside interface (connected to MAP domains) |
||
outside bool |
Configure MAP outside interface |
||
map_t_inside bool |
Configure MAP inside interface (connected to MAP domains) |
||
map_t_outside bool |
Configure MAP outside interface |
||
uuid str |
uuid of the object |
||
lw_4o6 dict |
Field lw_4o6 |
||
outside bool |
Configure LW-4over6 inside interface |
||
inside bool |
Configure LW-4over6 outside interface |
||
uuid str |
uuid of the object |
||
oper dict |
Field oper |
||
state str |
Field state |
||
line_protocol str |
Field line_protocol |
||
link_type str |
Field link_type |
||
mac str |
Field mac |
||
config_speed int |
Field config_speed |
||
ipv4_address str |
IPv4 address |
||
ipv4_netmask str |
IPv4 subnet mask |
||
ipv6_link_local str |
Field ipv6_link_local |
||
ipv6_link_local_prefix str |
Field ipv6_link_local_prefix |
||
ipv6_link_local_type str |
Field ipv6_link_local_type |
||
ipv6_link_local_scope str |
Field ipv6_link_local_scope |
||
ipv4_addr_count int |
Field ipv4_addr_count |
||
ipv4_list list |
Field ipv4_list |
||
ipv6_addr_count int |
Field ipv6_addr_count |
||
ipv6_list list |
Field ipv6_list |
||
ifnum int |
Tunnel interface number |
||
stats dict |
Field stats |
||
num_rx_pkts str |
received packets |
||
num_total_rx_bytes str |
received bytes |
||
num_tx_pkts str |
sent packets |
||
num_total_tx_bytes str |
sent bytes |
||
num_rx_err_pkts str |
received error packets |
||
num_tx_err_pkts str |
sent error packets |
||
rate_pkt_sent str |
Packet sent rate packets/sec |
||
rate_byte_sent str |
Byte sent rate bits/sec |
||
rate_pkt_rcvd str |
Packet received rate packets/sec |
||
rate_byte_rcvd str |
Byte received rate bits/sec |
||
ifnum int |
Tunnel interface number |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.