a10_router_ospf_area

Synopsis 

OSPF area parameters

Parameters 

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
ospf_process_id str/required			Key to identify parent object
area_ipv4 str/required			OSPF area ID in IP address format
area_num int/required			OSPF area ID as a decimal value
auth_cfg dict			Field auth_cfg
	authentication bool		Enable authentication
	message_digest bool		Use message-digest authentication
filter_lists list			Field filter_lists
	filter_list bool		Filter networks between OSPF areas
	acl_name str		Filter networks by access-list (Name of an access-list)
	acl_direction str		‘in’= Filter networks sent to this area; ‘out’= Filter networks sent from this area;
	plist_name str		Filter networks by prefix-list (Name of an IP prefix-list)
	plist_direction str		‘in’= Filter networks sent to this area; ‘out’= Filter networks sent from this area;
nssa_cfg dict			Field nssa_cfg
	nssa bool		Specify a NSSA area
	no_redistribution bool		No redistribution into this NSSA area
	no_summary bool		Do not send summary LSA into NSSA
	translator_role str		‘always’= Translate always; ‘candidate’= Candidate for translator (default); ‘never’= Do not translate;
	default_information_originate bool		Originate Type 7 default into NSSA area
	metric int		OSPF default metric (OSPF metric)
	metric_type int		OSPF metric type (OSPF metric type for default routes)
default_cost int			Set the summary-default cost of a NSSA or stub area (Stub’s advertised default summary cost)
range_list list			Field range_list
	area_range_prefix str		Area range for IPv4 prefix
	option str		‘advertise’= Advertise this range (default); ‘not-advertise’= DoNotAdvertise this range;
shortcut str			‘default’= Set default shortcutting behavior; ‘disable’= Disable shortcutting through the area; ‘enable’= Enable shortcutting through the area;
stub_cfg dict			Field stub_cfg
	stub bool		Configure OSPF area as stub
	no_summary bool		Do not inject inter-area routes into area
virtual_link_list list			Field virtual_link_list
	virtual_link_ip_addr str		ID (IP addr) associated with virtual link neighbor
	bfd bool		Bidirectional Forwarding Detection (BFD)
	hello_interval int		Hello packet interval (Seconds)
	dead_interval int		Dead router detection time (Seconds)
	retransmit_interval int		LSA retransmit interval (Seconds)
	transmit_delay int		LSA transmission delay (Seconds)
	virtual_link_authentication bool		Enable authentication
	virtual_link_auth_type str		‘message-digest’= Use message-digest authentication; ‘null’= Use null authentication;
	authentication_key str		Set authentication key (Authentication key (8 chars))
	message_digest_key int		Set message digest key (Key ID)
	md5 str		Use MD5 algorithm (Authentication key (16 chars))
uuid str			uuid of the object

Examples 

Return Values 

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’]): The AXAPI endpoint being accessed.
http_method (, str, [‘POST’, ‘GET’]): HTTP method being used by the primary task to interact with the AXAPI endpoint.
request_body (, complex, ): Params used to query the AXAPI
response_body (, complex, ): Response from the AXAPI

Status 

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.

Authors

A10 Networks