a10_flowspec

Synopsis 

Configure Flowspec

Parameters 

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
name str/required			Flowspec name
src_addr_type str			‘ip’= IPv4 Address; ‘ipv6’= IPv6 Address;
src_ip_host str			IPv4 host address
src_ip_subnet str			IPv4 Subnet address
src_ipv6_host str			IPv6 host address
src_ipv6_subnet str			IPv6 Subnet address
dest_addr_type str			‘ip’= IPv4 Address; ‘ipv6’= IPv6 Address;
dest_ip_host str			IPv4 host address
dest_ip_subnet str			IPv4 Subnet address
dest_ipv6_host str			IPv6 host address
dest_ipv6_subnet str			IPv6 Subnet address
tcp_flags str			‘match-all’= not = 0 match = 1; ‘none-of’= not = 1 match = 0; ‘not-match’= not = 1 match = 1; ‘match-any’= not = 0 match = 0;
tcp_flags_bitmask str			Bitmask in Hex
uuid str			uuid of the object
user_tag str			Customized tag
source_port_list list			Field source_port_list
	port_attribute str		‘eq’= Match only packets on a given source port; ‘gt’= Match only packets with a greater port number; ‘lt’= Match only packets with a lower port number; ‘range’= match only packets in the range of port numbers;
	port_num int		Specify the port number
	port_num_end int		Specify the port number
	uuid str		uuid of the object
destination_port_list list			Field destination_port_list
	port_attribute str		‘eq’= Match only packets on a given destination port; ‘gt’= Match only packets with a greater port number; ‘lt’= Match only packets with a lower port number; ‘range’= match only packets in the range of port numbers;
	port_num int		Specify the port number
	port_num_end int		Specify the port number
	uuid str		uuid of the object
port_list list			Field port_list
	port_attribute str		‘eq’= Match only packets on a given port; ‘gt’= Match only packets with a greater port number; ‘lt’= Match only packets with a lower port number; ‘range’= match only packets in the range of port numbers;
	port_num int		Specify the port number
	port_num_end int		Specify the port number
	uuid str		uuid of the object
protocol_list list			Field protocol_list
	proto_attribute str		‘eq’= Match only packets on a given protocol; ‘gt’= Match only packets with a greater protocol number; ‘lt’= Match only packets with a lower protocol number; ‘range’= match only packets in the range of protocol numbers;
	proto_num int		Specify the protocol number(6 for TCP and 17 for UDP)
	proto_num_end int		Specify the protocol number
	uuid str		uuid of the object
fragmentation_option_list list			Field fragmentation_option_list
	frag_attribute str		‘is-fragment’= Is fragmented packet; ‘first-fragment’= Is the first fragment packet; ‘last-fragment’= Is the last fragment; ‘dont-fragment’= Is DF bit set;
	uuid str		uuid of the object
icmp_type_list list			Field icmp_type_list
	icmp_type_attribute str		‘eq’= Match only packets on a given ICMP Type; ‘gt’= Match only packets with a greater ICMP Type; ‘lt’= Match only packets with a lower ICMP Type; ‘range’= match only packets in the range of ICMP Types;
	ntype int		Specify the ICMP Type
	type_end int		Specify the ICMP Type
	uuid str		uuid of the object
icmp_code_list list			Field icmp_code_list
	icmp_code_attribute str		‘eq’= Match only packets on a given ICMP Code; ‘gt’= Match only packets with a greater ICMP Code; ‘lt’= Match only packets with a lower ICMP Code; ‘range’= match only packets in the range of ICMP Codes;
	code int		Specify the ICMP Code
	code_end int		Specify the ICMP Code
	uuid str		uuid of the object
packet_length_list list			Field packet_length_list
	packet_length_attribute str		‘eq’= Match only packets on a given Packet Length; ‘gt’= Match only packets with a greater Packet Length; ‘lt’= Match only packets with a lower Packet Length; ‘range’= match only packets in the range of Packet Lengths;
	length int		Specify the Packet Length
	length_end int		Specify the Packet Length
	uuid str		uuid of the object
dscp_list list			Field dscp_list
	dscp_attribute str		‘eq’= Match only packets on a given DSCP; ‘gt’= Match only packets with a greater DSCP; ‘lt’= Match only packets with a lower DSCP; ‘range’= match only packets in the range of DSCPs;
	dscp_val int		Specify the DSCP value
	dscp_val_end int		Specify the DSCP value
	uuid str		uuid of the object
filtering_action dict			Field filtering_action
	terminal_action bool		Evaluation stops after this rule if not set
	sample_log bool		Enable traffic sampling and logging
	traffic_rate int		Type 0x8006 - Apply rate (in Bytes per second) for this class of traffic
	traffic_marking str		‘dscp’= IPv4 DSCP; ‘ipv6-traffic-class’= IPv6 Traffic Class;
	dscp_val int		Set DSCP value
	traffic_class int		Set IPv6 Traffic Class value
	redirect str		‘next-hop-nlri’= Type 0x0800 - IP encoded in MP_REACH_NLRI Next-hop network; ‘next-hop’= Type 0x0800 - Extended community Next-hop (Per v2 dated Feb 2015); ‘vrf-route-target’= Type 0x8008 - Redirect to VRF Route Target;
	next_hop_nlri_type str		‘ip’= Type 0x0800 - IPv4 Address; ‘ipv6’= Type 0x0800 - IPv6 Address;
	ip_host_nlri str		IPv4 host address
	copy_ip_host_nlri bool		Copy bit
	ipv6_host_nlri str		IPv6 host address
	copy_ipv6_host_nlri bool		Copy bit
	next_hop_type str		‘ip’= Type 0x0800 - IPv4 Address; ‘ipv6’= Type 0x0800 - IPv6 Address;
	ip_host str		IPv4 host address
	copy_ip_host bool		Copy bit
	ipv6_host str		IPv6 host address
	copy_ipv6_host bool		Copy bit
	vrf_target_string str		Type 0x8008(ASN-2=Index), 0x8208(ASN-4=Index) - Route Target AS
	vrf_target_ip str		‘ip’= Type 0x8108 - Redirect to route-target IP;
	ip_host_rt str		Type 0x8108 - Route Target IPv4
	value_ip_host int		2-byte decimal value(local-administrator)
	ecomm_custom_hex str		Custom Extended Community in Hex
	uuid str		uuid of the object
operational_mode dict			Field operational_mode
	mode str		‘enabled’= Enable the flowspec and send the prefix to BGP; ‘disabled’= Disable the flowspec and remove the prefix from BGP;
	uuid str		uuid of the object

Examples 

Return Values 

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’]): The AXAPI endpoint being accessed.
http_method (, str, [‘POST’, ‘GET’]): HTTP method being used by the primary task to interact with the AXAPI endpoint.
request_body (, complex, ): Params used to query the AXAPI
response_body (, complex, ): Response from the AXAPI

Status 

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.

Authors

A10 Networks