a10_system

Synopsis

Configure System Parameters

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
anomaly_log bool			log system anomalies
attack_log bool			log attack anomalies
ddos_attack bool			System DDoS Attack
ddos_log bool			log DDoS attack anomalies
sockstress_disable bool			Disable sockstress protection
promiscuous_mode bool			Run in promiscous mode settings
module_ctrl_cpu str			‘high’= high cpu usage; ‘low’= low cpu usage; ‘medium’= medium cpu usage;
rfc_ipfix_ie_spec str			‘enable’= Use RFC-defined IPFIX information element lengths; ‘disable’= Use non-standard IPFIX information element lengths;
src_ip_hash_enable bool			Enable source ip hash
class_list_hitcount_enable bool			Enable class list hit count
geo_db_hitcount_enable bool			Enable Geolocation database hit count
domain_list_hitcount_enable bool			Enable class list hit count
dynamic_service_dns_socket_pool bool			Enable socket pool for dynamic-service DNS
ipv6_prefix_length int			Length of IPv6 prefix used to determine the user-group and the PU, by default 128
drop_linux_closed_port_syn str			‘enable’= enable (default); ‘disable’= disable;
uuid str			uuid of the object
timeout_value dict			Field timeout_value
	ftp int		set timeout to stop ftp transfer in seconds, 0 is no limit
	scp int		set timeout to stop scp transfer in seconds, 0 is no limit
	sftp int		set timeout to stop sftp transfer in seconds, 0 is no limit
	tftp int		set timeout to stop tftp transfer in seconds, 0 is no limit
	http int		set timeout to stop http transfer in seconds, 0 is no limit
	https int		set timeout to stop https transfer in seconds, 0 is no limit
	uuid str		uuid of the object
bandwidth dict			Field bandwidth
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
counter_lib_accounting dict			Field counter_lib_accounting
	uuid str		uuid of the object
control_cpu dict			Field control_cpu
	uuid str		uuid of the object
data_cpu dict			Field data_cpu
	uuid str		uuid of the object
mgmt_port dict			Field mgmt_port
	port_index int		port index to be configured (Specify port index)
	mac_address str		mac-address to be configured as mgmt port
	pci_address str		pci-address to be configured as mgmt port
shared_poll_mode dict			Field shared_poll_mode
	enable bool		Enable shared poll mode
	disable bool		Disable shared poll mode
probe_network_devices dict			Field probe_network_devices
asic_mmu_fail_safe dict			Field asic_mmu_fail_safe
	recovery_threshold int		ASIC Fail-safe recovery threshold in Errors (Units of 1 Errors (default 2))
	monitor_interval int		ASIC Fail-safe monitoring intervals in Seconds (Units of 1 Seconds (default 60))
	monitor_disable bool		Enable Fail-safe software error monitoring and act on it
	reboot_disable bool		Disable system reboot if system encounters mmu error
	inject_error bool		Inject MMU SER/Parity errors
	test_pattern_type str		‘all-zeros’= Inject all bits 0s in a byte; ‘all-ones’= Inject all bits 1s in a byte; ‘lcb’= Logical checker board; ‘inverse-lcb’= Inverse Logical checker board;
	uuid str		uuid of the object
management_interface_mode dict			Field management_interface_mode
	dedicated bool		Set management interface in dedicated mode
	non_dedicated bool		Set management interface in non-dedicated mode
set_tcp_syn_per_sec dict			Field set_tcp_syn_per_sec
	tcp_syn_value int		Configure Tcp SYN’s per sec, default 70
	uuid str		uuid of the object
add_port dict			Field add_port
	port_index int		port index to be configured (Specify port index)
del_port dict			Field del_port
	port_index int		port index to be configured (Specify port index)
modify_port dict			Field modify_port
	port_index int		port index to be configured (Specify port index)
	port_number int		port number to be configured (Specify port number)
tls_1_3_mgmt dict			Field tls_1_3_mgmt
	enable bool		Enable TLS 1.3 support on ACOS management plane
	uuid str		uuid of the object
multi_queue_support dict			Field multi_queue_support
	enable bool		Enable Multi-Queue-Support
cpu_packet_prio_support dict			Field cpu_packet_prio_support
	enable bool		Enable CPU packet prioritization Support
	disable bool		Disable CPU packet prioritization Support
add_cpu_core dict			Field add_cpu_core
	core_index int		core index to be added (Specify core index)
delete_cpu_core dict			Field delete_cpu_core
	core_index int		core index to be deleted (Specify core index)
cpu_hyper_thread dict			Field cpu_hyper_thread
	enable bool		Enable CPU Hyperthreading
	disable bool		Disable CPU Hyperthreading
io_cpu dict			Field io_cpu
	max_cores int		max number of IO cores (Specify number of cores)
link_monitor dict			Field link_monitor
	enable bool		Enable Link Monitoring
	disable bool		Disable Link Monitoring
lro dict			Field lro
	enable bool		Enable Large Receive Offload
	disable bool		Disable Large Receive Offload
tso dict			Field tso
	enable bool		Enable TCP Segmentation Offload
	disable bool		Disable TCP Segmentation Offload
port_list dict			Field port_list
	uuid str		uuid of the object
port_info dict			Field port_info
	uuid str		uuid of the object
inuse_port_list dict			Field inuse_port_list
	uuid str		uuid of the object
cpu_list dict			Field cpu_list
	uuid str		uuid of the object
cpu_map dict			Field cpu_map
	uuid str		uuid of the object
inuse_cpu_list dict			Field inuse_cpu_list
	uuid str		uuid of the object
set_rxtx_desc_size dict			Field set_rxtx_desc_size
	port_index int		port index to be configured (Specify port index)
	rxd_size int		Set new rx-descriptor size
	txd_size int		Set new tx-descriptor size
set_rxtx_queue dict			Field set_rxtx_queue
	port_index int		port index to be configured (Specify port index)
	rxq_size int		Set number of new rx queues
	txq_size int		Set number of new tx queues
template dict			Field template
	template_policy str		Apply policy template to the whole system (Policy template name)
	uuid str		uuid of the object
template_bind dict			Field template_bind
	monitor_list list		Field monitor_list
mon_template dict			Field mon_template
	monitor_list list		Field monitor_list
	link_block_as_down dict		Field link_block_as_down
	link_down_on_restart dict		Field link_down_on_restart
memory dict			Field memory
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
resource_usage dict			Field resource_usage
	ssl_context_memory int		Total SSL context memory needed in units of MB. Will be rounded to closest multiple of 2MB
	ssl_dma_memory int		Total SSL DMA memory needed in units of MB. Will be rounded to closest multiple of 2MB
	nat_pool_addr_count int		Total configurable NAT Pool addresses in the System
	l4_session_count int		Total Sessions in the System
	auth_portal_html_file_size int		Specify maximum html file size for each html page in auth portal (in KB)
	auth_portal_image_file_size int		Specify maximum image file size for default portal (in KB)
	max_aflex_file_size int		Set maximum aFleX file size (Maximum file size in KBytes, default is 32K)
	aflex_table_entry_count int		Total aFleX table entry in the system (Total aFlex entry in the system)
	class_list_ipv6_addr_count int		Total IPv6 addresses for class-list
	class_list_ac_entry_count int		Total entries for AC class-list
	class_list_entry_count int		Total entries for class-list
	max_aflex_authz_collection_number int		Specify the maximum number of collections supported by aFleX authorization
	radius_table_size int		Total configurable CGNV6 RADIUS Table entries
	authz_policy_number int		Specify the maximum number of authorization policies
	ipsec_sa_number int		Specify the maximum number of IPsec SA
	ram_cache_memory_limit int		Specify the maximum memory used by ram cache
	waf_template_count int		Total configurable WAF Templates in the System
	auth_session_count int		Total auth sessions in the system
	uuid str		uuid of the object
	visibility dict		Field visibility
link_capability dict			Field link_capability
	enable bool		Enable/Disable link capabilities
	uuid str		uuid of the object
resource_accounting dict			Field resource_accounting
	uuid str		uuid of the object
	template_list list		Field template_list
trunk dict			Field trunk
	load_balance dict		Field load_balance
ports dict			Field ports
	link_detection_interval int		Link detection interval in msecs
	uuid str		uuid of the object
table_integrity dict			Field table_integrity
	table str		‘all’= All tables;
	audit_action str		‘enable’= Enable table integrity audit; ‘disable’= Disable table integrity audit;
	auto_sync_action str		‘enable’= Enable auto-sync; ‘disable’= Disable auto-sync;
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
ipsec dict			Field ipsec
	packet_round_robin bool		Enable packet round robin for IPsec packets
	crypto_core int		Crypto cores assigned for IPsec processing
	crypto_mem int		Crypto memory percentage assigned for IPsec processing (rounded to increments of 10)
	uuid str		uuid of the object
	fpga_decrypt dict		Field fpga_decrypt
spe_profile dict			Field spe_profile
	action str		‘ipv4-only’= Enable IPv4 HW forward entries only; ‘ipv6-only’= Enable IPv6 HW forward entries only; ‘ipv4-ipv6’= Enable Both IPv4/IPv6 HW forward entries (shared);
spe_status dict			Field spe_status
	uuid str		uuid of the object
ssl_status dict			Field ssl_status
	uuid str		uuid of the object
deep_hrxq dict			Field deep_hrxq
	enable bool		Field enable
	hrxq_num_chunks str		‘2048’= Set FPGA Deep HRXQ depth as 2048 per CPU; ‘1024’= Set FPGA Deep HRXQ depth as 1024 per CPU; ‘512’= Set FPGA Deep HRXQ depth as 512 per CPU;
hrxq_status dict			Field hrxq_status
	uuid str		uuid of the object
cpu_load_sharing dict			Field cpu_load_sharing
	disable bool		Disable CPU load sharing in overload situations
	packets_per_second dict		Field packets_per_second
	cpu_usage dict		Field cpu_usage
	tcp bool		Disallow redistribution of new TCP sessions
	udp bool		Disallow redistribution of new UDP sessions
	uuid str		uuid of the object
per_vlan_limit dict			Field per_vlan_limit
	bcast int		broadcast packets (per second limit)
	ipmcast int		IP multicast packets (per second limit)
	mcast int		multicast packets (per second limit)
	unknown_ucast int		unknown unicast packets (per second limit)
	uuid str		uuid of the object
all_vlan_limit dict			Field all_vlan_limit
	bcast int		broadcast packets (per second limit)
	ipmcast int		IP multicast packets (per second limit)
	mcast int		multicast packets (per second limit)
	unknown_ucast int		unknown unicast packets (per second limit)
	uuid str		uuid of the object
ve_mac_scheme dict			Field ve_mac_scheme
	ve_mac_scheme_val str		‘hash-based’= Hash-based using the VE number; ‘round-robin’= Round Robin scheme; ‘system-mac’= Use system MAC address;
	uuid str		uuid of the object
session_reclaim_limit dict			Field session_reclaim_limit
	nscan_limit int		smp session scan limit (number of smp sessions per scan)
	scan_freq int		smp session scan frequency (scan per second)
	uuid str		uuid of the object
ssl_scv dict			Field ssl_scv
	enable bool		Enable server certificate validation for all SSL connections
	uuid str		uuid of the object
ssl_scv_verify_host dict			Field ssl_scv_verify_host
	disable bool		Disable verify host during SCV
	uuid str		uuid of the object
ssl_scv_verify_crl_sign dict			Field ssl_scv_verify_crl_sign
	enable bool		Enable verify CRL signature during SCV
	uuid str		uuid of the object
ssl_set_compatible_cipher dict			Field ssl_set_compatible_cipher
	disable bool		Disable setting common cipher suite in management plane
	uuid str		uuid of the object
hardware dict			Field hardware
	uuid str		uuid of the object
platformtype dict			Field platformtype
	uuid str		uuid of the object
reboot dict			Field reboot
	uuid str		uuid of the object
shutdown dict			Field shutdown
	uuid str		uuid of the object
environment dict			Field environment
	uuid str		uuid of the object
hardware_forward dict			Field hardware_forward
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
	slb dict		Field slb
throughput dict			Field throughput
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
ipmi dict			Field ipmi
	reset bool		Reset IPMI Controller
	ip dict		Field ip
	ipsrc dict		Field ipsrc
	user dict		Field user
	tool dict		Field tool
queuing_buffer dict			Field queuing_buffer
	enable bool		Enable/Disable micro-burst traffic support
	uuid str		uuid of the object
high_memory_l4_session dict			Field high_memory_l4_session
	enable bool		Enable/Disable high memory l4 session support
	uuid str		uuid of the object
trunk_hw_hash dict			Field trunk_hw_hash
	mode int		Set HW hash mode, default is 6 (1=dst-mac 2=src-mac 3=src-dst-mac 4=src-ip 5=dst-ip 6=rtag6 7=rtag7)
	uuid str		uuid of the object
trunk_xaui_hw_hash dict			Field trunk_xaui_hw_hash
	mode int		Set HW hash mode, default is 6 (1=dst-mac 2=src-mac 3=src-dst-mac 4=src-ip 5=dst-ip 6=rtag6 7=rtag7)
	uuid str		uuid of the object
upgrade_status dict			Field upgrade_status
	uuid str		uuid of the object
guest_file dict			Field guest_file
	uuid str		uuid of the object
cm_update_file_name_ref dict			Field cm_update_file_name_ref
	source_name str		bind source name
	dest_name str		bind dest name
	id int		Specify unique Partition id
core dict			Field core
	uuid str		uuid of the object
apps_global dict			Field apps_global
	log_session_on_established bool		Send TCP session creation log on completion of 3-way handshake
	msl_time int		Configure maximum session life, default is 2 seconds (1-39 seconds, default is 2 seconds)
	timer_wheel_walk_limit int		Set timer wheel walk limit (0-1024, 0 is unlimited, default is 100)
	sessions_threshold int		Set threshold for total sessions across the system (Enter threshold number)
	cps_threshold int		Set threshold for the total Connections Per Second across the system (Enter threshold number)
	uuid str		uuid of the object
shell_privileges dict			Field shell_privileges
	enable_shell_privileges bool		enable the shell privileges for a given customer
	uuid str		uuid of the object
cosq_stats dict			Field cosq_stats
	uuid str		uuid of the object
cosq_show dict			Field cosq_show
	uuid str		uuid of the object
shm_logging dict			Field shm_logging
	enable bool		Enable shared memory based logging
	uuid str		uuid of the object
fw dict			Field fw
	application_mempool bool		Enable application memory pool
	application_flow int		Number of flows
	basic_dpi_enable bool		Enable basic dpi
	uuid str		uuid of the object
password_policy dict			Field password_policy
	complexity str		‘Strict’= Strict= Min length=8, Min Lower Case=2, Min Upper Case=2, Min Numbers=2, Min Special Character=1, CHANGE Min 8 Characters; ‘Medium’= Medium= Min length=6, Min Lower Case=2, Min Upper Case=2, Min Numbers=1, Min Special Character=1, CHANGE Min 6 Characters; ‘Simple’= Simple= Min length=4, Min Lower Case=1, Min Upper Case=1, Min Numbers=1, Min Special Character=0, CHANGE Min 4 Characters;
	aging str		‘Strict’= Strict= Max Age-60 Days; ‘Medium’= Medium= Max Age- 90 Days; ‘Simple’= Simple= Max Age-120 Days;
	history str		‘Strict’= Strict= Does not allow upto 5 old passwords; ‘Medium’= Medium= Does not allow upto 4 old passwords; ‘Simple’= Simple= Does not allow upto 3 old passwords;
	min_pswd_len int		Configure custom password length
	uuid str		uuid of the object
radius dict			Field radius
	server dict		Field server
geoloc_list_list list			Field geoloc_list_list
	name str		Specify name of Geolocation list
	shared bool		Enable sharing with other partitions
	include_geoloc_name_list list		Field include_geoloc_name_list
	exclude_geoloc_name_list list		Field exclude_geoloc_name_list
	uuid str		uuid of the object
	user_tag str		Customized tag
	sampling_enable list		Field sampling_enable
geoloc_name_helper dict			Field geoloc_name_helper
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
geolocation_file dict			Field geolocation_file
	uuid str		uuid of the object
	error_info dict		Field error_info
geoloc dict			Field geoloc
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
geo_location dict			Field geo_location
	geo_location_iana bool		Load built-in IANA Database
	geo_location_geolite2_city bool		Load built-in Maxmind GeoLite2-City database. Database available from http=//www.maxmind.com
	geolite2_city_include_ipv6 bool		Include IPv6 address
	geo_location_geolite2_country bool		Load built-in Maxmind GeoLite2-Country database. Database available from http=//www.maxmind.com
	geolite2_country_include_ipv6 bool		Include IPv6 address
	geoloc_load_file_list list		Field geoloc_load_file_list
	uuid str		uuid of the object
	entry_list list		Field entry_list
tcp_syn_per_sec dict			Field tcp_syn_per_sec
	uuid str		uuid of the object
asic_debug_dump dict			Field asic_debug_dump
	enable bool		Enable/Disable L2L3 ASIC traffic discard/drop events and Dump debug information
	uuid str		uuid of the object
ip_threat_list dict			Field ip_threat_list
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
	ipv4_source_list dict		Field ipv4_source_list
	ipv4_dest_list dict		Field ipv4_dest_list
	ipv6_source_list dict		Field ipv6_source_list
	ipv6_dest_list dict		Field ipv6_dest_list
	ipv4_internet_host_list dict		Field ipv4_internet_host_list
	ipv6_internet_host_list dict		Field ipv6_internet_host_list
fpga_drop dict			Field fpga_drop
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
dpdk_stats dict			Field dpdk_stats
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
fpga_core_crc dict			Field fpga_core_crc
	monitor_disable bool		Disable FPGA Core CRC error monitoring and act on it
	reboot_enable bool		Enable system reboot if system encounters FPGA Core CRC error
	uuid str		uuid of the object
mfa_management dict			Field mfa_management
	enable bool		Enable 2FA for management plane
	uuid str		uuid of the object
mfa_validation_type dict			Field mfa_validation_type
	ca_cert str		Configure CA Certificate
	uuid str		uuid of the object
mfa_cert_store dict			Field mfa_cert_store
	cert_host str		Configure certificate store host
	protocol str		‘tftp’= Use tftp for connection; ‘ftp’= Use ftp for connection; ‘scp’= Use scp for connection; ‘http’= Use http for connection; ‘https’= Use https for connection; ‘sftp’= Use sftp for connection;
	cert_store_path str		Configure certificate store path
	username str		Certificate store host username
	passwd_string str		Certificate store host password
	encrypted str		Do NOT use this option manually. (This is an A10 reserved keyword.) (The ENCRYPTED secret string)
	uuid str		uuid of the object
mfa_auth dict			Field mfa_auth
	username str		Username for MFA validation
	second_factor str		Input second factor paramter
q_in_q dict			Field q_in_q
	inner_tpid str		TPID for inner VLAN (Inner TPID, 16 bit hex value, default is 8100)
	outer_tpid str		TPID for outer VLAN (Outer TPID, 16 bit hex value, default is 8100)
	enable_all_ports bool		Enable 802.1QinQ on all physical ports
	uuid str		uuid of the object
xaui_dlb_mode dict			Field xaui_dlb_mode
	enable bool		Enable/Disable Dynamic Load Balancing traffic distribution support
	uuid str		uuid of the object
glid dict			Field glid
	glid_id int		Apply limits to the whole system
	non_shared bool		Apply global limit ID to the whole system at per data cpu level (default disabled)
	uuid str		uuid of the object
enable_disk_encryption dict			Field enable_disk_encryption
	cipher str		‘aes’= cipher aes; ‘serpent’= cipher serpent; ‘twofish’= cipher twofish;
	passphrase str		Enter phassphrase in plain text format
	passphrase_base64 str		Enter phassphrase in base64 format
psu_info dict			Field psu_info
	uuid str		uuid of the object
gui_image_list dict			Field gui_image_list
	uuid str		uuid of the object
syslog_time_msec dict			Field syslog_time_msec
	enable_flag bool		Field enable_flag
ipmi_service dict			Field ipmi_service
	disable bool		Disable IPMI on platform
	uuid str		uuid of the object
app_performance dict			Field app_performance
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
ssl_req_q dict			Field ssl_req_q
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
cli_monitor_interval dict			Field cli_monitor_interval
	interval int		one interval is 300ms (0 = disable)
	uuid str		uuid of the object
nsm_a10lb dict			Field nsm_a10lb
	kill bool		NSM will terminate a10lb if no response received
	uuid str		uuid of the object
tcp dict			Field tcp
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
	rate_limit_reset_unknown_conn dict		Field rate_limit_reset_unknown_conn
icmp dict			Field icmp
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
icmp6 dict			Field icmp6
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
ip_stats dict			Field ip_stats
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
ip6_stats dict			Field ip6_stats
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
domain_list_info dict			Field domain_list_info
	uuid str		uuid of the object
ip_dns_cache dict			Field ip_dns_cache
	uuid str		uuid of the object
bfd dict			Field bfd
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
icmp_rate dict			Field icmp_rate
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
dns dict			Field dns
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
	recursive_nameserver dict		Field recursive_nameserver
dns_cache dict			Field dns_cache
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
session dict			Field session
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
ndisc_ra dict			Field ndisc_ra
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
tcp_stats dict			Field tcp_stats
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable
telemetry_log dict			Field telemetry_log
	top_k_source_list dict		Field top_k_source_list
	top_k_app_svc_list dict		Field top_k_app_svc_list
	device_status dict		Field device_status
	environment dict		Field environment
	partition_metrics dict		Field partition_metrics
pbslb dict			Field pbslb
	uuid str		uuid of the object
	sampling_enable list		Field sampling_enable

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks