a10_slb_switch
Synopsis
Configure slb switch
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
uuid str |
uuid of the object |
||
sampling_enable list |
Field sampling_enable |
||
counters1 str |
‘all’= all; ‘fwlb’= FWLB; ‘licexpire_drop’= License Expire Drop; ‘bwl_drop’= BW Limit Drop; ‘rx_kernel’= Received kernel; ‘rx_arp_req’= ARP REQ Rcvd; ‘rx_arp_resp’= ARP RESP Rcvd; ‘vlan_flood’= VLAN Flood; ‘l2_def_vlan_drop’= L2 Default Vlan FWD Drop; ‘ipv4_noroute_drop’= IPv4 No Route Drop; ‘ipv6_noroute_drop’= IPv6 No Route Drop; ‘prot_down_drop’= Prot Down Drop; ‘l2_forward’= L2 Forward; ‘l3_forward_ip’= L3 IP Forward; ‘l3_forward_ipv6’= L3 IPv6 Forward; ‘l4_process’= L4 Process; ‘unknown_prot_drop’= Unknown Prot Drop; ‘ttl_exceeded_drop’= TTL Exceeded Drop; ‘linkdown_drop’= Link Down Drop; ‘sport_drop’= SPORT Drop; ‘incorrect_len_drop’= Incorrect Length Drop; ‘ip_defrag’= IP Defrag; ‘acl_deny’= ACL Denys; ‘ipfrag_tcp’= IP(TCP) Fragment Rcvd; ‘ipfrag_overlap’= IP Fragment Overlap; ‘ipfrag_timeout’= IP Fragment Timeout; ‘ipfrag_overload’= IP Frag Overload Drops; ‘ipfrag_reasmoks’= IP Fragment Reasm OKs; ‘ipfrag_reasmfails’= IP Fragment Reasm Fails; ‘land_drop’= Anomaly Land Attack Drop; ‘ipoptions_drop’= Anomaly IP OPT Drops; ‘badpkt_drop’= Bad Pkt Drop; ‘pingofdeath_drop’= Anomaly PingDeath Drop; ‘allfrag_drop’= Anomaly All Frag Drop; ‘tcpnoflag_drop’= Anomaly TCP noFlag Drop; ‘tcpsynfrag_drop’= Anomaly SYN Frag Drop; ‘tcpsynfin_drop’= Anomaly TCP SYNFIN Drop; ‘ipsec_drop’= IPSec Drop; ‘bpdu_rcvd’= BPDUs Received; ‘bpdu_sent’= BPDUs Sent; ‘ctrl_syn_rate_drop’= SYN rate exceeded Drop; ‘ip_defrag_invalid_len’= IP Invalid Length Frag; ‘ipv4_frag_6rd_ok’= IPv4 Frag 6RD OK; ‘ipv4_frag_6rd_drop’= IPv4 Frag 6RD Dropped; ‘no_ip_drop’= No IP Drop; ‘ipv6frag_udp’= IPv6 Frag UDP; ‘ipv6frag_udp_dropped’= IPv6 Frag UDP Dropped; ‘ipv6frag_tcp_dropped’= IPv6 Frag TCP Dropped; ‘ipv6frag_ipip_ok’= IPv6 Frag IPIP OKs; ‘ipv6frag_ipip_dropped’= IPv6 Frag IPIP Drop; ‘ip_frag_oversize’= IP Fragment oversize; ‘ip_frag_too_many’= IP Fragment too many; ‘ipv4_novlanfwd_drop’= IPv4 No L3 VLAN FWD Drop; ‘ipv6_novlanfwd_drop’= IPv6 No L3 VLAN FWD Drop; ‘fpga_error_pkt1’= FPGA Error PKT1; ‘fpga_error_pkt2’= FPGA Error PKT2; ‘max_arp_drop’= Max ARP Drop; ‘ipv6frag_tcp’= IPv6 Frag TCP; ‘ipv6frag_icmp’= IPv6 Frag ICMP; ‘ipv6frag_ospf’= IPv6 Frag OSPF; ‘ipv6frag_esp’= IPv6 Frag ESP; ‘l4_in_ctrl_cpu’= L4 In Ctrl CPU; ‘mgmt_svc_drop’= Management Service Drop; ‘jumbo_frag_drop’= Jumbo Frag Drop; ‘ipv6_jumbo_frag_drop’= IPv6 Jumbo Frag Drop; ‘ipipv6_jumbo_frag_drop’= IPIPv6 Jumbo Frag Drop; ‘ipv6_ndisc_dad_solicits’= IPv6 DAD on Solicits; ‘ipv6_ndisc_dad_adverts’= IPv6 DAD on Adverts; ‘ipv6_ndisc_mac_changes’= IPv6 DAD MAC Changed; ‘ipv6_ndisc_out_of_memory’= IPv6 DAD Out-of-memory; ‘sp_non_ctrl_pkt_drop’= Shared IP mode non ctrl packet to linux drop; ‘urpf_pkt_drop’= URPF check packet drop; ‘fw_smp_zone_mismatch’= FW SMP Zone Mismatch; ‘ipfrag_udp’= IP(UDP) Fragment Rcvd; ‘ipfrag_icmp’= IP(ICMP) Fragment Rcvd; ‘ipfrag_ospf’= IP(OSPF) Fragment Rcvd; ‘ipfrag_esp’= IP(ESP) Fragment Rcvd; ‘ipfrag_tcp_dropped’= IP Frag TCP Dropped; ‘ipfrag_udp_dropped’= IP Frag UDP Dropped; ‘ipfrag_ipip_dropped’= IP Frag IPIP Drop; ‘redirect_fwd_fail’= Redirect failed in the fwd direction; ‘redirect_fwd_sent’= Redirect succeeded in the fwd direction; ‘redirect_rev_fail’= Redirect failed in the rev direction; ‘redirect_rev_sent’= Redirect succeeded in the rev direction; ‘redirect_setup_fail’= Redirect connection setup failed; ‘ip_frag_sent’= IP frag sent; ‘invalid_rx_arp_pkt’= Invalid ARP PKT Rcvd; ‘invalid_sender_mac_arp_drop’= ARP PKT dropped due to invalid sender MAC; ‘dev_based_arp_drop’= ARP PKT dropped due to interface state checks; ‘scaleout_arp_drop’= ARP PKT dropped due to scaleout checks; ‘virtual_ip_not_found_arp_drop’= ARP PKT dropped due to virtual IP not found; ‘inactive_static_nat_pool_arp_drop’= ARP PKT dropped due to inactive static nat pool; ‘inactive_nat_pool_arp_drop’= ARP PKT dropped due to inactive nat pool; ‘scaleout_hairpin_arp_drop’= ARP PKT dropped due to scaleout hairpin checks; ‘self_grat_arp_drop’= Self generated grat ARP PKT dropped; ‘self_grat_nat_ip_arp_drop’= Self generated grat ARP PKT dropped for NAT IP; ‘ip_not_found_arp_drop’= ARP PKT dropped due to IP not found; ‘dev_link_down_arp_drop’= ARP PKT dropped due to interface is down; ‘lacp_tx_intf_err_drop’= LACP interface error corrected; ‘service_chain_sent’= Service Chain Packets Sent; ‘service_chain_rcvd’= Service Chain Packets Rcvd; ‘unnumbered_nat_error’= Unnumbered NAT error; ‘unnumbered_unsupported_drop’= Unsupported protocol for unnumbered; ‘ipv6frag_gre_dropped’= IPv6 Frag gre Drop; ‘ipv6_ndisc_dad_prefix_mismatch_drop’= IPv6 DAD on Advertise drop for prefix mismatch; ‘bw_ignore_limit’= BW Limit ignored packets count; ‘ppsl_drop_egr’= Packet-Per-Sec Limit Drop at egress; ‘ppsl_drop_ing’= Packet- Per-Sec Limit Drop at ingress; ‘ppsl_ignore_limit’= Packet-Per-Sec Limit ignored packets count; ‘closed_port_syn_drop’= Linux Closed Port SYN Drop; ‘ip_icmp_error_drop’= IP ICMP Error Drop; ‘tls13_drop_req’= TLS13-Request-Per- Sec Limit Drop at ingress; ‘tls13_ignore_req’= TLS13-Request-Per-Sec Limit ignored packets count; ‘tls12_drop_req’= TLS12-Request-Per-Sec Limit Drop at ingress; ‘tls12_ignore_req’= TLS12-Request-Per-Sec Limit ignored packets count; ‘tls12_tls13_drop_req’= TLS12–TLS13-Request-Per-Sec Limit Drop at ingress; ‘tls12_tls13_ignore_req’= TLS12-TLS13-Request-Per-Sec Limit ignored packets count; |
||
stats dict |
Field stats |
||
fwlb str |
FWLB |
||
licexpire_drop str |
License Expire Drop |
||
bwl_drop str |
BW Limit Drop |
||
rx_kernel str |
Received kernel |
||
rx_arp_req str |
ARP REQ Rcvd |
||
rx_arp_resp str |
ARP RESP Rcvd |
||
vlan_flood str |
VLAN Flood |
||
l2_def_vlan_drop str |
L2 Default Vlan FWD Drop |
||
ipv4_noroute_drop str |
IPv4 No Route Drop |
||
ipv6_noroute_drop str |
IPv6 No Route Drop |
||
prot_down_drop str |
Prot Down Drop |
||
l2_forward str |
L2 Forward |
||
l3_forward_ip str |
L3 IP Forward |
||
l3_forward_ipv6 str |
L3 IPv6 Forward |
||
l4_process str |
L4 Process |
||
unknown_prot_drop str |
Unknown Prot Drop |
||
ttl_exceeded_drop str |
TTL Exceeded Drop |
||
linkdown_drop str |
Link Down Drop |
||
sport_drop str |
SPORT Drop |
||
incorrect_len_drop str |
Incorrect Length Drop |
||
ip_defrag str |
IP Defrag |
||
acl_deny str |
ACL Denys |
||
ipfrag_tcp str |
IP(TCP) Fragment Rcvd |
||
ipfrag_overlap str |
IP Fragment Overlap |
||
ipfrag_timeout str |
IP Fragment Timeout |
||
ipfrag_overload str |
IP Frag Overload Drops |
||
ipfrag_reasmoks str |
IP Fragment Reasm OKs |
||
ipfrag_reasmfails str |
IP Fragment Reasm Fails |
||
badpkt_drop str |
Bad Pkt Drop |
||
ipsec_drop str |
IPSec Drop |
||
bpdu_rcvd str |
BPDUs Received |
||
bpdu_sent str |
BPDUs Sent |
||
ctrl_syn_rate_drop str |
SYN rate exceeded Drop |
||
ip_defrag_invalid_len str |
IP Invalid Length Frag |
||
ipv4_frag_6rd_ok str |
IPv4 Frag 6RD OK |
||
ipv4_frag_6rd_drop str |
IPv4 Frag 6RD Dropped |
||
no_ip_drop str |
No IP Drop |
||
ipv6frag_udp str |
IPv6 Frag UDP |
||
ipv6frag_udp_dropped str |
IPv6 Frag UDP Dropped |
||
ipv6frag_tcp_dropped str |
IPv6 Frag TCP Dropped |
||
ipv6frag_ipip_ok str |
IPv6 Frag IPIP OKs |
||
ipv6frag_ipip_dropped str |
IPv6 Frag IPIP Drop |
||
ip_frag_oversize str |
IP Fragment oversize |
||
ip_frag_too_many str |
IP Fragment too many |
||
ipv4_novlanfwd_drop str |
IPv4 No L3 VLAN FWD Drop |
||
ipv6_novlanfwd_drop str |
IPv6 No L3 VLAN FWD Drop |
||
fpga_error_pkt1 str |
FPGA Error PKT1 |
||
fpga_error_pkt2 str |
FPGA Error PKT2 |
||
max_arp_drop str |
Max ARP Drop |
||
ipv6frag_tcp str |
IPv6 Frag TCP |
||
ipv6frag_icmp str |
IPv6 Frag ICMP |
||
ipv6frag_ospf str |
IPv6 Frag OSPF |
||
ipv6frag_esp str |
IPv6 Frag ESP |
||
l4_in_ctrl_cpu str |
L4 In Ctrl CPU |
||
mgmt_svc_drop str |
Management Service Drop |
||
jumbo_frag_drop str |
Jumbo Frag Drop |
||
ipv6_jumbo_frag_drop str |
IPv6 Jumbo Frag Drop |
||
ipipv6_jumbo_frag_drop str |
IPIPv6 Jumbo Frag Drop |
||
ipv6_ndisc_dad_solicits str |
IPv6 DAD on Solicits |
||
ipv6_ndisc_dad_adverts str |
IPv6 DAD on Adverts |
||
ipv6_ndisc_mac_changes str |
IPv6 DAD MAC Changed |
||
ipv6_ndisc_out_of_memory str |
IPv6 DAD Out-of-memory |
||
sp_non_ctrl_pkt_drop str |
Shared IP mode non ctrl packet to linux drop |
||
urpf_pkt_drop str |
URPF check packet drop |
||
fw_smp_zone_mismatch str |
FW SMP Zone Mismatch |
||
ipfrag_udp str |
IP(UDP) Fragment Rcvd |
||
ipfrag_icmp str |
IP(ICMP) Fragment Rcvd |
||
ipfrag_ospf str |
IP(OSPF) Fragment Rcvd |
||
ipfrag_esp str |
IP(ESP) Fragment Rcvd |
||
ipfrag_tcp_dropped str |
IP Frag TCP Dropped |
||
ipfrag_udp_dropped str |
IP Frag UDP Dropped |
||
ipfrag_ipip_dropped str |
IP Frag IPIP Drop |
||
redirect_fwd_fail str |
Redirect failed in the fwd direction |
||
redirect_fwd_sent str |
Redirect succeeded in the fwd direction |
||
redirect_rev_fail str |
Redirect failed in the rev direction |
||
redirect_rev_sent str |
Redirect succeeded in the rev direction |
||
redirect_setup_fail str |
Redirect connection setup failed |
||
ip_frag_sent str |
IP frag sent |
||
invalid_rx_arp_pkt str |
Invalid ARP PKT Rcvd |
||
invalid_sender_mac_arp_drop str |
ARP PKT dropped due to invalid sender MAC |
||
dev_based_arp_drop str |
ARP PKT dropped due to interface state checks |
||
scaleout_arp_drop str |
ARP PKT dropped due to scaleout checks |
||
virtual_ip_not_found_arp_drop str |
ARP PKT dropped due to virtual IP not found |
||
inactive_static_nat_pool_arp_drop str |
ARP PKT dropped due to inactive static nat pool |
||
inactive_nat_pool_arp_drop str |
ARP PKT dropped due to inactive nat pool |
||
scaleout_hairpin_arp_drop str |
ARP PKT dropped due to scaleout hairpin checks |
||
self_grat_arp_drop str |
Self generated grat ARP PKT dropped |
||
self_grat_nat_ip_arp_drop str |
Self generated grat ARP PKT dropped for NAT IP |
||
ip_not_found_arp_drop str |
ARP PKT dropped due to IP not found |
||
dev_link_down_arp_drop str |
ARP PKT dropped due to interface is down |
||
lacp_tx_intf_err_drop str |
LACP interface error corrected |
||
service_chain_sent str |
Service Chain Packets Sent |
||
service_chain_rcvd str |
Service Chain Packets Rcvd |
||
unnumbered_nat_error str |
Unnumbered NAT error |
||
unnumbered_unsupported_drop str |
Unsupported protocol for unnumbered |
||
ipv6frag_gre_dropped str |
IPv6 Frag gre Drop |
||
ipv6_ndisc_dad_prefix_mismatch_drop str |
IPv6 DAD on Advertise drop for prefix mismatch |
||
bw_ignore_limit str |
BW Limit ignored packets count |
||
ppsl_drop_egr str |
Packet-Per-Sec Limit Drop at egress |
||
ppsl_drop_ing str |
Packet-Per-Sec Limit Drop at ingress |
||
ppsl_ignore_limit str |
Packet-Per-Sec Limit ignored packets count |
||
closed_port_syn_drop str |
Linux Closed Port SYN Drop |
||
ip_icmp_error_drop str |
IP ICMP Error Drop |
||
tls13_drop_req str |
TLS13-Request-Per-Sec Limit Drop at ingress |
||
tls13_ignore_req str |
TLS13-Request-Per-Sec Limit ignored packets count |
||
tls12_drop_req str |
TLS12-Request-Per-Sec Limit Drop at ingress |
||
tls12_ignore_req str |
TLS12-Request-Per-Sec Limit ignored packets count |
||
tls12_tls13_drop_req str |
TLS12–TLS13-Request-Per-Sec Limit Drop at ingress |
||
tls12_tls13_ignore_req str |
TLS12-TLS13-Request-Per-Sec Limit ignored packets count |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.