a10_slb_server_port
Synopsis
Real Server Port
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
server_name str/required |
Key to identify parent object |
||
port_number int/required |
Port Number |
||
protocol str/required |
‘tcp’= TCP Port; ‘udp’= UDP Port; |
||
range int |
Port range (Port range value - used for vip-to-rport-mapping and vport-rport range mapping) |
||
template_port str |
Port template (Port template name) |
||
shared_partition_port_template bool |
Reference a port template from shared partition |
||
template_port_shared str |
Port Template Name |
||
template_server_ssl str |
Server side SSL template (Server side SSL Name) |
||
action str |
‘enable’= enable; ‘disable’= disable; ‘disable-with-health-check’= disable port, but health check work; |
||
no_ssl bool |
No SSL |
||
health_check str |
Health Check (Monitor Name) |
||
shared_rport_health_check bool |
Reference a health-check from shared partition |
||
rport_health_check_shared str |
Health Check (Monitor Name) |
||
health_check_follow_port int |
Specify which port to follow for health status (Port Number) |
||
follow_port_protocol str |
‘tcp’= TCP Port; ‘udp’= UDP Port; |
||
health_check_disable bool |
Disable health check |
||
support_http2 bool |
Starting HTTP/2 with Prior Knowledge |
||
only bool |
Force using HTTP/2 with Prior Knowledge all the time |
||
weight int |
Port Weight (Connection Weight) |
||
conn_limit int |
Connection Limit |
||
no_logging bool |
Do not log connection over limit event |
||
conn_resume int |
Connection Resume |
||
stats_data_action str |
‘stats-data-enable’= Enable statistical data collection for real server port; ‘stats-data-disable’= Disable statistical data collection for real server port; |
||
extended_stats bool |
Enable extended statistics on real server port |
||
alternate_port list |
Field alternate_port |
||
alternate int |
Alternate Server Number |
||
alternate_name str |
Alternate Name |
||
alternate_server_port int |
Port (Alternate Server Port Value) |
||
auth_cfg dict |
Field auth_cfg |
||
service_principal_name str |
Service Principal Name (Kerberos principal name) |
||
uuid str |
uuid of the object |
||
user_tag str |
Customized tag |
||
sampling_enable list |
Field sampling_enable |
||
counters1 str |
‘all’= all; ‘curr_req’= Current requests; ‘total_req’= Total Requests; ‘total_req_succ’= Total requests succ; ‘total_fwd_bytes’= Bytes processed in forward direction; ‘total_fwd_pkts’= Packets processed in forward direction; ‘total_rev_bytes’= Bytes processed in reverse direction; ‘total_rev_pkts’= Packets processed in reverse direction; ‘total_conn’= Total connections; ‘last_total_conn’= Last total connections; ‘peak_conn’= Peak connections; ‘es_resp_200’= Response status 200; ‘es_resp_300’= Response status 300; ‘es_resp_400’= Response status 400; ‘es_resp_500’= Response status 500; ‘es_resp_other’= Response status other; ‘es_req_count’= Total proxy requests; ‘es_resp_count’= Total proxy response; ‘es_resp_invalid_http’= Total non-http response; ‘total_rev_pkts_inspected’= Total reverse packets inspected; ‘total_rev_pkts_inspected_good_status_code’= Total reverse packets with good status code inspected; ‘response_time’= Response time; ‘fastest_rsp_time’= Fastest response time; ‘slowest_rsp_time’= Slowest response time; ‘curr_ssl_conn’= Current SSL connections; ‘total_ssl_conn’= Total SSL connections; ‘resp-count’= Total Response Count; ‘resp-1xx’= Response status 1xx; ‘resp-2xx’= Response status 2xx; ‘resp-3xx’= Response status 3xx; ‘resp-4xx’= Response status 4xx; ‘resp-5xx’= Response status 5xx; ‘resp-other’= Response status Other; ‘resp-latency’= Time to First Response Byte; ‘curr_pconn’= Current persistent connections; |
||
packet_capture_template str |
Name of the packet capture template to be bind with this object |
||
oper dict |
Field oper |
||
state str |
Field state |
||
curr_conn_rate int |
Field curr_conn_rate |
||
conn_rate_unit str |
Field conn_rate_unit |
||
slow_start_conn_limit int |
Field slow_start_conn_limit |
||
curr_observe_rate int |
Field curr_observe_rate |
||
down_grace_period_allowed int |
Field down_grace_period_allowed |
||
current_time int |
Field current_time |
||
down_time_grace_period int |
Field down_time_grace_period |
||
diameter_enabled int |
Field diameter_enabled |
||
es_resp_time int |
Field es_resp_time |
||
inband_hm_reassign_num int |
Field inband_hm_reassign_num |
||
disable int |
Field disable |
||
hm_key int |
Field hm_key |
||
hm_index int |
Field hm_index |
||
soft_down_time int |
Field soft_down_time |
||
aflow_conn_limit int |
Field aflow_conn_limit |
||
aflow_queue_size int |
Field aflow_queue_size |
||
resv_conn int |
Field resv_conn |
||
auto_nat_addr_list list |
Field auto_nat_addr_list |
||
drs_auto_nat_list list |
Field drs_auto_nat_list |
||
pool_name str |
Field pool_name |
||
nat_pool_addr_list list |
Field nat_pool_addr_list |
||
drs_ip_nat_list list |
Field drs_ip_nat_list |
||
port_number int |
Port Number |
||
protocol str |
‘tcp’= TCP Port; ‘udp’= UDP Port; |
||
stats dict |
Field stats |
||
curr_conn str |
Current connections |
||
curr_req str |
Current requests |
||
total_req str |
Total Requests |
||
total_req_succ str |
Total requests succ |
||
total_fwd_bytes str |
Bytes processed in forward direction |
||
total_fwd_pkts str |
Packets processed in forward direction |
||
total_rev_bytes str |
Bytes processed in reverse direction |
||
total_rev_pkts str |
Packets processed in reverse direction |
||
total_conn str |
Total connections |
||
last_total_conn str |
Last total connections |
||
peak_conn str |
Peak connections |
||
es_resp_200 str |
Response status 200 |
||
es_resp_300 str |
Response status 300 |
||
es_resp_400 str |
Response status 400 |
||
es_resp_500 str |
Response status 500 |
||
es_resp_other str |
Response status other |
||
es_req_count str |
Total proxy requests |
||
es_resp_count str |
Total proxy response |
||
es_resp_invalid_http str |
Total non-http response |
||
total_rev_pkts_inspected str |
Total reverse packets inspected |
||
total_rev_pkts_inspected_good_status_code str |
Total reverse packets with good status code inspected |
||
response_time str |
Response time |
||
fastest_rsp_time str |
Fastest response time |
||
slowest_rsp_time str |
Slowest response time |
||
curr_ssl_conn str |
Current SSL connections |
||
total_ssl_conn str |
Total SSL connections |
||
resp_count str |
Total Response Count |
||
resp_1xx str |
Response status 1xx |
||
resp_2xx str |
Response status 2xx |
||
resp_3xx str |
Response status 3xx |
||
resp_4xx str |
Response status 4xx |
||
resp_5xx str |
Response status 5xx |
||
resp_other str |
Response status Other |
||
resp_latency str |
Time to First Response Byte |
||
curr_pconn str |
Current persistent connections |
||
port_number int |
Port Number |
||
protocol str |
‘tcp’= TCP Port; ‘udp’= UDP Port; |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.