a10_slb_server

Synopsis

Server

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
name str/required			Server Name
server_ipv6_addr str			IPV6 address
host str			IP Address
fqdn_name str			Server hostname
resolve_as str			‘resolve-to-ipv4’= Use A Query only to resolve FQDN; ‘resolve-to-ipv6’= Use AAAA Query only to resolve FQDN; ‘resolve-to-ipv4-and-ipv6’= Use A as well as AAAA Query to resolve FQDN;
use_aam_server bool			Using aam server. For health check, please configure it in aam server
ethernet str			ethernet interface
trunk int			trunk interface
action str			‘enable’= Enable this Real Server; ‘disable’= Disable this Real Server; ‘disable-with-health-check’= disable real server, but health check work;
external_ip str			External IP address for NAT of GSLB
ipv6 str			IPv6 address Mapping of GSLB
template_server str			Server template (Server template name)
shared_partition_server_template bool			Reference a server template from shared partition
template_server_shared str			Server Template Name
template_link_cost str			Link-Cost template (Link-Cost template name)
health_check str			Health Check Monitor (Health monitor name)
shared_partition_health_check bool			Reference a health-check from shared partition
health_check_shared str			Health Check Monitor (Health monitor name)
health_check_disable bool			Disable configured health check configuration
conn_limit int			Connection Limit
no_logging bool			Do not log connection over limit event
conn_resume int			Connection Resume (Connection Resume (min active conn before resume taking new conn))
weight int			Weight for this Real Server (Connection Weight)
slow_start bool			Slowly ramp up the connection number after server is up (start from 128, then double every 10 sec till 4096)
spoofing_cache bool			This server is a spoofing cache
stats_data_action str			‘stats-data-enable’= Enable statistical data collection for real server; ‘stats-data-disable’= Disable statistical data collection for real server;
extended_stats bool			Enable extended statistics on real server
alternate_server list			Field alternate_server
	alternate int		Alternate Server (Alternate Server Number)
	alternate_name str		Alternate Name
uuid str			uuid of the object
user_tag str			Customized tag
sampling_enable list			Field sampling_enable
	counters1 str		‘all’= all; ‘total-conn’= Total established connections; ‘fwd-pkt’= Forward Packets Processed; ‘rev-pkt’= Reverse Packets Processed; ‘peak-conn’= Peak number of established connections; ‘total_req’= Total Requests processed; ‘total_req_succ’= Total Requests succeeded; ‘curr_ssl_conn’= Current SSL connections established; ‘total_ssl_conn’= Total SSL connections established; ‘total_fwd_bytes’= Bytes processed in forward direction; ‘total_rev_bytes’= Bytes processed in reverse direction; ‘total_fwd_pkts’= Packets processed in forward direction; ‘total_rev_pkts’= Packets processed in reverse direction; ‘ip_only_lb_fwd_bytes’= IP-Only-LB Bytes processed in forward direction; ‘ip_only_lb_rev_bytes’= IP-Only-LB Bytes processed in reverse direction; ‘ip_only_lb_fwd_pkts’= IP-Only-LB Packets processed in forward direction; ‘ip_only_lb_rev_pkts’= IP-Only-LB Packets processed in reverse direction;
port_list list			Field port_list
	port_number int		Port Number
	protocol str		‘tcp’= TCP Port; ‘udp’= UDP Port;
	range int		Port range (Port range value - used for vip-to-rport-mapping and vport-rport range mapping)
	template_port str		Port template (Port template name)
	shared_partition_port_template bool		Reference a port template from shared partition
	template_port_shared str		Port Template Name
	template_server_ssl str		Server side SSL template (Server side SSL Name)
	action str		‘enable’= enable; ‘disable’= disable; ‘disable-with-health-check’= disable port, but health check work;
	no_ssl bool		No SSL
	health_check str		Health Check (Monitor Name)
	shared_rport_health_check bool		Reference a health-check from shared partition
	rport_health_check_shared str		Health Check (Monitor Name)
	health_check_follow_port int		Specify which port to follow for health status (Port Number)
	follow_port_protocol str		‘tcp’= TCP Port; ‘udp’= UDP Port;
	health_check_disable bool		Disable health check
	support_http2 bool		Starting HTTP/2 with Prior Knowledge
	weight int		Port Weight (Connection Weight)
	conn_limit int		Connection Limit
	no_logging bool		Do not log connection over limit event
	conn_resume int		Connection Resume
	stats_data_action str		‘stats-data-enable’= Enable statistical data collection for real server port; ‘stats-data-disable’= Disable statistical data collection for real server port;
	extended_stats bool		Enable extended statistics on real server port
	alternate_port list		Field alternate_port
	auth_cfg dict		Field auth_cfg
	uuid str		uuid of the object
	user_tag str		Customized tag
	sampling_enable list		Field sampling_enable
	packet_capture_template str		Name of the packet capture template to be bind with this object
oper dict			Field oper
	state str		Field state
	creation_type str		Field creation_type
	dns_update_time str		Field dns_update_time
	server_ttl int		Field server_ttl
	srv_gateway_arp str		Field srv_gateway_arp
	is_autocreate int		Field is_autocreate
	slow_start_conn_limit int		Field slow_start_conn_limit
	curr_conn_rate int		Field curr_conn_rate
	conn_rate_unit str		Field conn_rate_unit
	curr_observe_rate int		Field curr_observe_rate
	disable int		Field disable
	weight int		Field weight
	drs_list list		Field drs_list
	name str		Server Name
	port_list list		Field port_list
stats dict			Field stats
	curr_conn str		Current established connections
	total_conn str		Total established connections
	fwd_pkt str		Forward Packets Processed
	rev_pkt str		Reverse Packets Processed
	peak_conn str		Peak number of established connections
	total_req str		Total Requests processed
	total_req_succ str		Total Requests succeeded
	curr_ssl_conn str		Current SSL connections established
	total_ssl_conn str		Total SSL connections established
	total_fwd_bytes str		Bytes processed in forward direction
	total_rev_bytes str		Bytes processed in reverse direction
	total_fwd_pkts str		Packets processed in forward direction
	total_rev_pkts str		Packets processed in reverse direction
	ip_only_lb_fwd_bytes str		IP-Only-LB Bytes processed in forward direction
	ip_only_lb_rev_bytes str		IP-Only-LB Bytes processed in reverse direction
	ip_only_lb_fwd_pkts str		IP-Only-LB Packets processed in forward direction
	ip_only_lb_rev_pkts str		IP-Only-LB Packets processed in reverse direction
	name str		Server Name
	port_list list		Field port_list

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks 2021