a10_gslb_site

Synopsis

Specify a GSLB site

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
site_name str/required			Specify GSLB site name
auto_map bool			Enable DNS Auto Mapping
disable bool			Disable all servers in the GSLB site
weight int			Specify a weight for the GSLB site (Weight, default is 1)
multiple_geo_locations list			Field multiple_geo_locations
	geo_location str		Specify the geographic location of the GSLB site (Specify geo-location for this site)
template str			Specify template to collect site information (Specify GSLB SNMP template name)
bw_cost bool			Specify cost of band-width
limit int			Specify the limit for bandwidth, default is unlimited
threshold int			Specify the threshold for limit
proto_aging_time int			Specify GSLB Protocol aging time
proto_aging_fast bool			Fast GSLB Protocol aging
controller str			Specify the local controller for the GSLB site (Specify the hostname of the local controller)
uuid str			uuid of the object
user_tag str			Customized tag
ip_server_list list			Field ip_server_list
	ip_server_name str		Specify the real server name
	uuid str		uuid of the object
active_rdt dict			Field active_rdt
	aging_time int		Aging Time, Unit= min, default is 10
	smooth_factor int		Factor of Smooth RDT, default is 10
	range_factor int		Factor of RDT Range, default is 25 (Range Factor of Smooth RDT)
	limit int		Limit of valid RDT, default is 16383 (Limit, unit= millisecond)
	mask str		Client IP subnet mask, default is 32
	ipv6_mask int		Client IPv6 subnet mask, default is 128
	ignore_count int		Ignore count if RDT is out of range, default is 5
	bind_geoloc bool		Bind RDT to geo-location
	overlap bool		Enable overlap for geo-location to do longest match
	uuid str		uuid of the object
easy_rdt dict			Field easy_rdt
	aging_time int		Aging Time, Unit= min, default is 10
	smooth_factor int		Factor of Smooth RDT, default is 10
	range_factor int		Factor of RDT Range, default is 25 (Range Factor of Smooth RDT)
	limit int		Limit of valid RDT, default is 16383 (Limit, unit= millisecond)
	mask str		Client IP subnet mask, default is 32
	ipv6_mask int		Client IPv6 subnet mask, default is 128
	ignore_count int		Ignore count if RDT is out of range, default is 5
	bind_geoloc bool		Bind RDT to geo-location
	overlap bool		Enable overlap for geo-location to do longest match
	uuid str		uuid of the object
slb_dev_list list			Field slb_dev_list
	device_name str		Specify SLB device name
	ip_address str		IP address
	ipv6_address str		IPv6 address
	admin_preference int		Specify administrative preference (Specify admin-preference value,default is 100)
	session_number int		Field session_number
	session_utilization int		Field session_utilization
	rdt_type str		‘rdt’= rdt; ‘site-rdt’= site-rdt;
	client_ip str		Specify client IP address
	rdt_value int		Specify Round-delay-time
	probe_timer int		Field probe_timer
	auto_detect str		‘ip’= Service IP only; ‘port’= Service Port only; ‘ip-and-port’= Both service IP and service port; ‘disabled’= disable auto-detect;
	auto_map bool		Enable DNS Auto Mapping
	max_client int		Specify maximum number of clients, default is 32768
	proto_aging_time int		Specify GSLB Protocol aging time, default is 60
	proto_aging_fast bool		Fast GSLB Protocol aging
	health_check_action str		‘health-check’= Enable health Check; ‘health-check-disable’= Disable health check;
	gateway_ip_addr str		IP address
	proto_compatible bool		Run GSLB Protocol in compatible mode
	msg_format_acos_2x bool		Run GSLB Protocol in compatible mode with a ACOS 2.x GSLB peer
	uuid str		uuid of the object
	user_tag str		Customized tag
	vip_server dict		Field vip_server
oper dict			Field oper
	gslb_site str		Field gslb_site
	state str		Field state
	type_last list		Field type_last
	client_ldns_list list		Field client_ldns_list
	site_name str		Specify GSLB site name
	ip_server_list list		Field ip_server_list
	slb_dev_list list		Field slb_dev_list
stats dict			Field stats
	hits str		Number of times the site was selected
	site_name str		Specify GSLB site name
	ip_server_list list		Field ip_server_list
	slb_dev_list list		Field slb_dev_list

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks 2021