a10_cgnv6_pcp
Synopsis
Set Port Control Protocol parameters
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
default_template str |
Bind the default template for PCP (Bind a PCP template) |
||
uuid str |
uuid of the object |
||
sampling_enable list |
Field sampling_enable |
||
counters1 str |
‘all’= all; ‘packets-rcv’= Packets Received; ‘lsn-map-process-success’= PCP MAP Request Processing Success (NAT44); ‘dslite-map-process-success’= PCP MAP Request Processing Success (DS-Lite); ‘nat64-map-process-success’= PCP MAP Request Processing Success (NAT64); ‘lsn-peer-process-success’= PCP PEER Request Processing Success (NAT44); ‘dslite-peer-process-success’= PCP PEER Request Processing Success (DS-Lite); ‘nat64-peer-process-success’= PCP PEER Request Processing Success (NAT64); ‘lsn-announce-process-success’= PCP ANNOUNCE Request Processing Success (NAT44); ‘dslite-announce-process-success’= PCP ANNOUNCE Request Processing Success (DS-Lite); ‘nat64-announce-process- success’= PCP ANNOUNCE Request Processing Success (NAT64); ‘pkt-not-request- drop’= Packet Not a PCP Request; ‘pkt-too-short-drop’= Packet Too Short; ‘noroute-drop’= Response No Route; ‘unsupported-version’= Unsupported PCP version; ‘not-authorized’= PCP Request Not Authorized; ‘malform-request’= PCP Request Malformed; ‘unsupp-opcode’= Unsupported PCP Opcode; ‘unsupp-option’= Unsupported PCP Option; ‘malform-option’= PCP Option Malformed; ‘no-resources’= No System or NAT Resources; ‘unsupp-protocol’= Unsupported Mapping Protocol; ‘user-quota-exceeded’= User Quota Exceeded; ‘cannot-provide-suggest’= Cannot Provide Suggested Port When PREFER_FAILURE; ‘address-mismatch’= PCP Client Address Mismatch; ‘excessive-remote-peers’= Excessive Remote Peers; ‘pkt-not- from-nat-inside’= Packet Dropped For Not Coming From NAT Inside; ‘l4-process- error’= L3/L4 Process Error; ‘internal-error-drop’= Internal Error; ‘unsol_ance_sent_succ’= Unsolicited Announce Sent; ‘unsol_ance_sent_fail’= Unsolicited Announce Send Failure; ‘ha_sync_epoch_sent’= HA Sync PCP Epoch Sent; ‘ha_sync_epoch_rcv’= HA Sync PCP Epoch Recv; ‘fullcone-ext-alloc’= PCP Fullcone Extension Alloc; ‘fullcone-ext-free’= PCP Fullcone Extension Free; ‘fullcone-ext-alloc-failure’= PCP Fullcone Extension Alloc Failure; ‘fullcone- ext-notfound’= PCP Fullcone Extension Not Found; ‘fullcone-ext-reuse’= PCP Fullcone Extension Reuse; ‘client-nonce-mismatch’= PCP Client Nonce Mismatch; ‘map-filter-set’= PCP MAP Filter Set; ‘map-filter-deny’= PCP MAP Filter Deny Inbound; ‘inter-board-pkts’= PCP Inter board packets; |
||
stats dict |
Field stats |
||
packets_rcv str |
Packets Received |
||
lsn_map_process_success str |
PCP MAP Request Processing Success (NAT44) |
||
dslite_map_process_success str |
PCP MAP Request Processing Success (DS-Lite) |
||
nat64_map_process_success str |
PCP MAP Request Processing Success (NAT64) |
||
lsn_peer_process_success str |
PCP PEER Request Processing Success (NAT44) |
||
dslite_peer_process_success str |
PCP PEER Request Processing Success (DS-Lite) |
||
nat64_peer_process_success str |
PCP PEER Request Processing Success (NAT64) |
||
lsn_announce_process_success str |
PCP ANNOUNCE Request Processing Success (NAT44) |
||
dslite_announce_process_success str |
PCP ANNOUNCE Request Processing Success (DS-Lite) |
||
nat64_announce_process_success str |
PCP ANNOUNCE Request Processing Success (NAT64) |
||
pkt_not_request_drop str |
Packet Not a PCP Request |
||
pkt_too_short_drop str |
Packet Too Short |
||
noroute_drop str |
Response No Route |
||
unsupported_version str |
Unsupported PCP version |
||
not_authorized str |
PCP Request Not Authorized |
||
malform_request str |
PCP Request Malformed |
||
unsupp_opcode str |
Unsupported PCP Opcode |
||
unsupp_option str |
Unsupported PCP Option |
||
malform_option str |
PCP Option Malformed |
||
no_resources str |
No System or NAT Resources |
||
unsupp_protocol str |
Unsupported Mapping Protocol |
||
user_quota_exceeded str |
User Quota Exceeded |
||
cannot_provide_suggest str |
Cannot Provide Suggested Port When PREFER_FAILURE |
||
address_mismatch str |
PCP Client Address Mismatch |
||
excessive_remote_peers str |
Excessive Remote Peers |
||
pkt_not_from_nat_inside str |
Packet Dropped For Not Coming From NAT Inside |
||
l4_process_error str |
L3/L4 Process Error |
||
internal_error_drop str |
Internal Error |
||
unsol_ance_sent_succ str |
Unsolicited Announce Sent |
||
unsol_ance_sent_fail str |
Unsolicited Announce Send Failure |
||
ha_sync_epoch_sent str |
HA Sync PCP Epoch Sent |
||
ha_sync_epoch_rcv str |
HA Sync PCP Epoch Recv |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.