a10_axdebug

Synopsis

Packet Trace Options

Parameters

Parameters		Choices/Defaults	Comment
state str/required		[‘noop’, ‘present’, ‘absent’]	State of the object to be created.
ansible_host str/required			Host for AXAPI authentication
ansible_username str/required			Username for AXAPI authentication
ansible_password str/required			Password for AXAPI authentication
ansible_port int/required			Port for AXAPI authentication
a10_device_context_id int		[‘1-8’]	Device ID for aVCS configuration
a10_partition str			Destination/target partition for object/command
count int			Maximum packets to capture per cpu. Default is 3000. (Maximum packets to capture. For umlimited, specify 0)
incoming bool			Incoming interface. (For all ports, don’t specify port number.)
inc_port_num str			Port Numbers separated by commas(,) and hyphens(-) without spaces. ex= 4,5,10-30, or separated by spaces and double-quoted(‘)
outgoing bool			Outgoing interface (For all ports, don’t specify port number.)
out_port_num str			Port Numbers separated by commas(,) and hyphens(-) without spaces. ex= 4,5,10-30, or separated by spaces and double-quoted(‘)
length int			Packet length to capture
maxfile int			Maximum number of debug packet files. Default is 100
sess_filter_dis bool			Disable session based filter
timeout int			Maximum number of minutes for a capture. Default is 5 minutes. For unlimited, specify 0
uuid str			uuid of the object
apply_config dict			Field apply_config
	config_file str		config file name
save_config dict			Field save_config
	config_file str		config file name
	default bool		save to default config file
delete dict			Field delete
	capture_file str		Delete a capture file (Specify target filename to change)
	config_file str		Delete AXDebug config file (Specify target filename to change)
exit dict			Field exit
	stop_capture bool		stop capture traffic
capture dict			Field capture
	brief bool		Print basic packet information
	detail bool		Include packet payload
	save str		Save packets into file (Specify filename to save packets)
	current_slot bool		Only for current-slot of chassis
	no_stop bool		Non-stop execution
filter_config_list list			Field filter_config_list
	number int		Specify filter id
	l3_proto str		‘arp’= arp; ‘neighbor’= neighbor;
	dst bool		Destination
	src bool		Src
	ip bool		IP
	ipv4_address str		ip address
	ipv4_netmask str		IP subnet mask
	ipv6 bool		IPV6
	ipv6_address str		ipv6 address
	mac bool		mac address
	mac_addr str		mac address
	port bool		port configurations
	dst_ip bool		dest IP
	dst_ipv4_address str		dest ip address
	src_ip bool		src IP
	src_ipv4_address str		src ip address
	dst_mac bool		dest mac address
	dst_mac_addr str		dest mac address
	src_mac bool		src mac address
	src_mac_addr str		src mac address
	dst_port bool		dest port number
	dst_port_num int		dest Port number
	src_port bool		src port number
	src_port_num int		src Port number
	port_num_min int		min port number
	port_num_max int		max port number
	proto bool		ip protocol number
	proto_val str		‘icmp’= icmp; ‘icmpv6’= icmpv6; ‘tcp’= tcp; ‘udp’= udp;
	prot_num int		protocol number
	offset int		byte offset
	length int		byte length
	oper_range str		‘gt’= greater than; ‘gte’= greater than or equal to; ‘se’= smaller than or equal to; ‘st’= smaller than; ‘eq’= equal to; ‘range’= select a range;
	hex bool		Define hex value
	min_hex str		min value
	max_hex str		max value
	comp_hex str		value to compare
	integer bool		Define decimal value
	integer_min int		min value
	integer_max int		max value
	integer_comp int		value to compare
	word bool		Define hex value
	WORD0 str		WORD0 to compare
	WORD1 str		WORD min value
	WORD2 str		WORD max value
	exit bool		Exit from axdebug mode
	uuid str		uuid of the object
	user_tag str		Customized tag

Examples

Return Values

modified_values (changed, dict, )

Values modified (or potential changes if using check_mode) as a result of task operation

axapi_calls (always, list, )

Sequential list of AXAPI calls made by the task

endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])

The AXAPI endpoint being accessed.

http_method (, str, [‘POST’, ‘GET’])

HTTP method being used by the primary task to interact with the AXAPI endpoint.

request_body (, complex, )

Params used to query the AXAPI

response_body (, complex, )

Response from the AXAPI

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]

• This module is maintained by community.

Authors

• A10 Networks 2021