a10_so_counters
Synopsis
Show scaleout statistics
Parameters
Parameters |
Choices/Defaults |
Comment |
|
|---|---|---|---|
state str/required |
[‘noop’, ‘present’, ‘absent’] |
State of the object to be created. |
|
ansible_host str/required |
Host for AXAPI authentication |
||
ansible_username str/required |
Username for AXAPI authentication |
||
ansible_password str/required |
Password for AXAPI authentication |
||
ansible_port int/required |
Port for AXAPI authentication |
||
a10_device_context_id int |
[‘1-8’] |
Device ID for aVCS configuration |
|
a10_partition str |
Destination/target partition for object/command |
||
uuid str |
uuid of the object |
||
sampling_enable list |
Field sampling_enable |
||
counters1 str |
‘all’= all; ‘so_pkts_rcvd’= Total data packets received; ‘so_redirect_pkts_sent’= Total packets redirected out of node; ‘so_pkts_dropped’= Total packets dropped; ‘so_redirected_pkts_rcvd’= Total redirected packets received on node; ‘so_fw_shadow_session_created’= FW Shadow Session created; ‘so_pkts_traffic_map_not_found_drop’= Traffic MAP Not Found Drop; ‘so_slb_pkts_redirect_conn_aged_out’= Total SLB redirect conns aged out; ‘so_pkts_scaleout_not_active_drop’= Scaleout Not Active Drop; ‘so_pkts_slb_nat_reserve_fail’= Total SLB NAT reserve failures; ‘so_pkts_slb_nat_release_fail’= Total SLB NAT release failures; ‘so_pkts_dest_mac_mismatch_drop’= Destination MAC Mistmatch Drop; ‘so_pkts_l2redirect_dest_mac_zero_drop’= Destination MAC Address zero Drop; ‘so_pkts_l2redirect_interface_not_up’= L2redirect Intf is not UP; ‘so_pkts_l2redirect_invalid_redirect_info_error’= Redirect Table Error due to invalid redirect info; ‘so_pkts_l3_redirect_encap_error_drop’= L3 Redirect encap error drop during transmission; ‘so_pkts_l3_redirect_inner_mac_zero_drop’= L3 Redirect inner mac zero drop during transmission; ‘so_pkts_l3_redirect_decap_vlan_sanity_drop’= L3 Redirect Decap VLAN Sanity Drop during receipt; ‘so_pkts_l3_redirect_decap_non_ipv4_vxlan_drop’= L3 Redirect received non ipv4 VXLAN packet; ‘so_pkts_l3_redirect_decap_rx_encap_params_drop’= L3 Redirect decap Rx encap params error Drop; ‘so_pkts_l3_redirect_table_error’= L3 Redirect Table error Drop; ‘so_pkts_l3_redirect_rcvd_in_l2_mode_drop’= Recevied l3 redirect packets in L2 mode Drop; ‘so_pkts_l3_redirect_fragmentation_error’= L3 redirect encap Fragmentation error; ‘so_pkts_l3_redirect_table_no_entry_found’= L3 redirect Table no redirect entry found error; ‘so_pkts_l3_redirect_invalid_dev_dir’= L3 Redirect Invalid Device direction during transmission; ‘so_pkts_l3_redirect_chassis_dest_mac_error’= L3 Redirect RX multi-slot Destination MAC Error; ‘so_pkts_l3_redirect_encap_ipv4_jumbo_frag_drop’= L3 Redirect ipv4 packet after encap more than max jumbo size; ‘so_pkts_l3_redirect_encap_ipv6_jumbo_frag_drop’= L3 Redirect tx ipv6 packet after encap more than max jumbo size; ‘so_pkts_l3_redirect_too_large_pkts_in_drop’= Received L3 Redirected fragmented packets too large; ‘so_pkts_l3_redirect_encap_mtu_error_drop’= Received L3 Redirected MTU not enough to add encap; ‘so_sync_fw_shadow_session_create’= Sent Sync message for FW Shadow session creation; ‘so_sync_fw_shadow_session_delete’= Sent Sync message for FW Shadow session deletion; ‘so_sync_fw_shadow_ext’= Sync FW Shadow extension creation/updation; ‘so_sync_shadow_stats_to_active’= Sync Shadow session stats from shadow to active; ‘so_fw_internal_rule_count’= FW internal rule count; ‘so_hc_registration_done’= Scaleout stats block registered with HC; ‘so_hc_deregistration_done’= Scaleout stats block de-registered with HC; ‘so_pkts_l2redirect_vlan_retrieval_error’= L2 redirect pkt vlan not retrieved; ‘so_pkts_l2redirect_port_retrieval_error’= L2 redirect pkt port not retrieved; ‘so_pkts_l2redirect_loop_detect_drop’= L2 redirect pkt loop detected and dropped; ‘so_pkts_l2redirect_same_pkt_multiple_times’= L2 redirect same pkt multiple times; ‘so_pkts_l2redirect_frag_vlan_retrieval_error’= L2 redirect pkt frag vlan not retrieved; ‘so_pkts_l2redirect_tx_frag_vlan_add_fail’= L2 redirect tx pkt failed to add vlan; |
||
stats dict |
Field stats |
||
so_pkts_rcvd str |
Total data packets received |
||
so_redirect_pkts_sent str |
Total packets redirected out of node |
||
so_pkts_dropped str |
Total packets dropped |
||
so_redirected_pkts_rcvd str |
Total redirected packets received on node |
||
so_fw_shadow_session_created str |
FW Shadow Session created |
||
so_pkts_traffic_map_not_found_drop str |
Traffic MAP Not Found Drop |
||
so_slb_pkts_redirect_conn_aged_out str |
Total SLB redirect conns aged out |
||
so_pkts_scaleout_not_active_drop str |
Scaleout Not Active Drop |
||
so_pkts_slb_nat_reserve_fail str |
Total SLB NAT reserve failures |
||
so_pkts_slb_nat_release_fail str |
Total SLB NAT release failures |
||
so_pkts_dest_mac_mismatch_drop str |
Destination MAC Mistmatch Drop |
||
so_pkts_l2redirect_dest_mac_zero_drop str |
Destination MAC Address zero Drop |
||
so_pkts_l2redirect_interface_not_up str |
L2redirect Intf is not UP |
||
so_pkts_l2redirect_invalid_redirect_info_error str |
Redirect Table Error due to invalid redirect info |
||
so_pkts_l3_redirect_encap_error_drop str |
L3 Redirect encap error drop during transmission |
||
so_pkts_l3_redirect_inner_mac_zero_drop str |
L3 Redirect inner mac zero drop during transmission |
||
so_pkts_l3_redirect_decap_vlan_sanity_drop str |
L3 Redirect Decap VLAN Sanity Drop during receipt |
||
so_pkts_l3_redirect_decap_non_ipv4_vxlan_drop str |
L3 Redirect received non ipv4 VXLAN packet |
||
so_pkts_l3_redirect_decap_rx_encap_params_drop str |
L3 Redirect decap Rx encap params error Drop |
||
so_pkts_l3_redirect_table_error str |
L3 Redirect Table error Drop |
||
so_pkts_l3_redirect_rcvd_in_l2_mode_drop str |
Recevied l3 redirect packets in L2 mode Drop |
||
so_pkts_l3_redirect_fragmentation_error str |
L3 redirect encap Fragmentation error |
||
so_pkts_l3_redirect_table_no_entry_found str |
L3 redirect Table no redirect entry found error |
||
so_pkts_l3_redirect_invalid_dev_dir str |
L3 Redirect Invalid Device direction during transmission |
||
so_pkts_l3_redirect_chassis_dest_mac_error str |
L3 Redirect RX multi-slot Destination MAC Error |
||
so_pkts_l3_redirect_encap_ipv4_jumbo_frag_drop str |
L3 Redirect ipv4 packet after encap more than max jumbo size |
||
so_pkts_l3_redirect_encap_ipv6_jumbo_frag_drop str |
L3 Redirect tx ipv6 packet after encap more than max jumbo size |
||
so_pkts_l3_redirect_too_large_pkts_in_drop str |
Received L3 Redirected fragmented packets too large |
||
so_pkts_l3_redirect_encap_mtu_error_drop str |
Received L3 Redirected MTU not enough to add encap |
||
so_pkts_l2redirect_vlan_retrieval_error str |
L2 redirect pkt vlan not retrieved |
||
so_pkts_l2redirect_port_retrieval_error str |
L2 redirect pkt port not retrieved |
||
so_pkts_l2redirect_loop_detect_drop str |
L2 redirect pkt loop detected and dropped |
||
so_pkts_l2redirect_same_pkt_multiple_times str |
L2 redirect same pkt multiple times |
||
so_pkts_l2redirect_frag_vlan_retrieval_error str |
L2 redirect pkt frag vlan not retrieved |
||
so_pkts_l2redirect_tx_frag_vlan_add_fail str |
L2 redirect tx pkt failed to add vlan |
||
Examples
Return Values
- modified_values (changed, dict, )
Values modified (or potential changes if using check_mode) as a result of task operation
- axapi_calls (always, list, )
Sequential list of AXAPI calls made by the task
- endpoint (, str, [‘/axapi/v3/slb/virtual_server’, ‘/axapi/v3/file/ssl-cert’])
The AXAPI endpoint being accessed.
- http_method (, str, [‘POST’, ‘GET’])
HTTP method being used by the primary task to interact with the AXAPI endpoint.
- request_body (, complex, )
Params used to query the AXAPI
- response_body (, complex, )
Response from the AXAPI
Status
This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by community.